The patch titled
Subject: linux-next-git-rejects
has been added to the -mm tree. Its filename is
linux-next-git-rejects.patch
This patch should soon appear at
http://ozlabs.org/~akpm/mmots/broken-out/linux-next-git-rejects.patch
and later at
http://ozlabs.org/~akpm/mmotm/broken-out/linux-next-git-rejects.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next and is updated
there every 3-4 working days
------------------------------------------------------
From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Subject: linux-next-git-rejects
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
sound/soc/codecs/rt5670.c | 15 ---------------
sound/soc/intel/boards/cht_bsw_rt5672.c | 10 ----------
sound/soc/soc-topology.c | 3 ---
3 files changed, 28 deletions(-)
--- a/sound/soc/codecs/rt5670.c~linux-next-git-rejects
+++ a/sound/soc/codecs/rt5670.c
@@ -30,11 +30,8 @@
#include "rt5670.h"
#include "rt5670-dsp.h"
-<<<<<<< HEAD
#define RT5670_DEV_GPIO BIT(0)
-=======
#define RT5670_GPIO1_IS_IRQ BIT(0)
->>>>>>> linux-next/akpm-base
#define RT5670_IN2_DIFF BIT(1)
#define RT5670_DMIC_EN BIT(2)
#define RT5670_DMIC1_IN2P BIT(3)
@@ -1457,11 +1454,7 @@ static int rt5670_spk_event(struct snd_s
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
struct rt5670_priv *rt5670 = snd_soc_component_get_drvdata(component);
-<<<<<<< HEAD
- if (!rt5670->pdata.gpio1_is_ext_spk_en)
-=======
if (!rt5670->gpio1_is_ext_spk_en)
->>>>>>> linux-next/akpm-base
return 0;
switch (event) {
@@ -3064,22 +3057,14 @@ static int rt5670_i2c_probe(struct i2c_c
RT5670_GP1_PF_MASK, RT5670_GP1_PF_OUT);
}
-<<<<<<< HEAD
- if (rt5670->pdata.gpio1_is_ext_spk_en) {
-=======
if (rt5670->gpio1_is_ext_spk_en) {
->>>>>>> linux-next/akpm-base
regmap_update_bits(rt5670->regmap, RT5670_GPIO_CTRL1,
RT5670_GP1_PIN_MASK, RT5670_GP1_PIN_GPIO1);
regmap_update_bits(rt5670->regmap, RT5670_GPIO_CTRL2,
RT5670_GP1_PF_MASK, RT5670_GP1_PF_OUT);
}
-<<<<<<< HEAD
- if (rt5670->pdata.jd_mode) {
-=======
if (rt5670->jd_mode) {
->>>>>>> linux-next/akpm-base
regmap_update_bits(rt5670->regmap, RT5670_GLB_CLK,
RT5670_SCLK_SRC_MASK, RT5670_SCLK_SRC_RCCLK);
rt5670->sysclk = 0;
--- a/sound/soc/intel/boards/cht_bsw_rt5672.c~linux-next-git-rejects
+++ a/sound/soc/intel/boards/cht_bsw_rt5672.c
@@ -253,15 +253,6 @@ static int cht_codec_fixup(struct snd_so
params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
/*
-<<<<<<< HEAD
- * Default mode for SSP configuration is TDM 4 slot. One board/design,
- * the Lenovo Miix 2 10 uses not 1 but 2 codecs connected to SSP2. The
- * second piggy-backed, output-only codec is inside the keyboard-dock
- * (which has extra speakers). Unlike the main rt5672 codec, we cannot
- * configure this codec, it is hard coded to use 2 channel 24 bit I2S.
- * Since we only support 2 channels anyways, there is no need for TDM
- * on any cht-bsw-rt5672 designs. So we simply use I2S 2ch everywhere.
-=======
* The default mode for the cpu-dai is TDM 4 slot. The default mode
* for the codec-dai is I2S. So we need to either set the cpu-dai to
* I2S mode to match the codec-dai, or set the codec-dai to TDM 4 slot
@@ -273,7 +264,6 @@ static int cht_codec_fixup(struct snd_so
* 2 channel 24 bit I2S. For this to work we must use I2S mode on this
* board. Since we only support 2 channels anyways, there is no need
* for TDM on any cht-bsw-rt5672 designs. So we use I2S 2ch everywhere.
->>>>>>> linux-next/akpm-base
*/
ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0),
SND_SOC_DAIFMT_I2S |
--- a/sound/soc/soc-topology.c~linux-next-git-rejects
+++ a/sound/soc/soc-topology.c
@@ -1263,10 +1263,7 @@ static int soc_tplg_dapm_graph_elems_loa
ret = soc_tplg_add_route(tplg, routes[i]);
if (ret < 0) {
-<<<<<<< HEAD
-=======
dev_err(tplg->dev, "ASoC: topology: add_route failed: %d\n", ret);
->>>>>>> linux-next/akpm-base
/*
* this route was added to the list, it will
* be freed in remove_route() so increment the
_
Patches currently in -mm which might be from akpm@xxxxxxxxxxxxxxxxxxxx are
mm-close-race-between-munmap-and-expand_upwards-downwards-fix.patch
mm-hugetlb-avoid-hardcoding-while-checking-if-cma-is-enabled-fix.patch
io-mapping-indicate-mapping-failure-fix.patch
mm-fix-kthread_use_mm-vs-tlb-invalidate-fix.patch
mm.patch
mm-handle-page-mapping-better-in-dump_page-fix.patch
mm-memcg-percpu-account-percpu-memory-to-memory-cgroups-fix.patch
mm-memcg-percpu-account-percpu-memory-to-memory-cgroups-fix-fix.patch
mm-thp-replace-http-links-with-https-ones-fix.patch
mm-vmstat-add-events-for-thp-migration-without-split-fix.patch
mmhwpoison-rework-soft-offline-for-in-use-pages-fix.patch
mm-vmstat-fix-proc-sys-vm-stat_refresh-generating-false-warnings-fix-2.patch
linux-next-rejects.patch
mm-migrate-clear-__gfp_reclaim-to-make-the-migration-callback-consistent-with-regular-thp-allocations-fix.patch
mm-madvise-introduce-process_madvise-syscall-an-external-memory-hinting-api-fix.patch
mm-madvise-introduce-process_madvise-syscall-an-external-memory-hinting-api-fix-2.patch
kernel-forkc-export-kernel_thread-to-modules.patch
linux-next-git-rejects.patch
