The patch titled
Subject: mm/memory_hotplug: introduce default dummy memory_add_physaddr_to_nid()
has been added to the -mm tree. Its filename is
mm-memory_hotplug-introduce-default-dummy-memory_add_physaddr_to_nid.patch
This patch should soon appear at
http://ozlabs.org/~akpm/mmots/broken-out/mm-memory_hotplug-introduce-default-dummy-memory_add_physaddr_to_nid.patch
and later at
http://ozlabs.org/~akpm/mmotm/broken-out/mm-memory_hotplug-introduce-default-dummy-memory_add_physaddr_to_nid.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next and is updated
there every 3-4 working days
------------------------------------------------------
From: Jia He <justin.he@xxxxxxx>
Subject: mm/memory_hotplug: introduce default dummy memory_add_physaddr_to_nid()
This is to introduce a general dummy helper. memory_add_physaddr_to_nid()
is a fallback option to get the nid in case NUMA_NO_NID is detected.
After this patch, arm64/sh/s390 can simply use the general dummy version.
PowerPC/x86/ia64 will still use their specific version.
This is the preparation to set a fallback value for dev_dax->target_node.
Link: http://lkml.kernel.org/r/20200710031619.18762-2-justin.he@xxxxxxx
Signed-off-by: Jia He <justin.he@xxxxxxx>
Reviewed-by: David Hildenbrand <david@xxxxxxxxxx>
Cc: Dan Williams <dan.j.williams@xxxxxxxxx>
Cc: Michal Hocko <mhocko@xxxxxxxx>
Cc: Catalin Marinas <catalin.marinas@xxxxxxx>
Cc: Will Deacon <will@xxxxxxxxxx>
Cc: Tony Luck <tony.luck@xxxxxxxxx>
Cc: Fenghua Yu <fenghua.yu@xxxxxxxxx>
Cc: Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx>
Cc: Rich Felker <dalias@xxxxxxxx>
Cc: Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx>
Cc: Andy Lutomirski <luto@xxxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Ingo Molnar <mingo@xxxxxxxxxx>
Cc: Borislav Petkov <bp@xxxxxxxxx>
Cc: "H. Peter Anvin" <hpa@xxxxxxxxx>
Cc: Vishal Verma <vishal.l.verma@xxxxxxxxx>
Cc: Dave Jiang <dave.jiang@xxxxxxxxx>
Cc: Baoquan He <bhe@xxxxxxxxxx>
Cc: Chuhong Yuan <hslester96@xxxxxxxxx>
Cc: Mike Rapoport <rppt@xxxxxxxxxxxxx>
Cc: Logan Gunthorpe <logang@xxxxxxxxxxxx>
Cc: Masahiro Yamada <masahiroy@xxxxxxxxxx>
Cc: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Cc: Kaly Xin <Kaly.Xin@xxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
arch/arm64/mm/numa.c | 10 ----------
arch/ia64/mm/numa.c | 2 --
arch/sh/mm/init.c | 9 ---------
arch/x86/mm/numa.c | 1 -
mm/memory_hotplug.c | 10 ++++++++++
5 files changed, 10 insertions(+), 22 deletions(-)
--- a/arch/arm64/mm/numa.c~mm-memory_hotplug-introduce-default-dummy-memory_add_physaddr_to_nid
+++ a/arch/arm64/mm/numa.c
@@ -461,13 +461,3 @@ void __init arm64_numa_init(void)
numa_init(dummy_numa_init);
}
-
-/*
- * We hope that we will be hotplugging memory on nodes we already know about,
- * such that acpi_get_node() succeeds and we never fall back to this...
- */
-int memory_add_physaddr_to_nid(u64 addr)
-{
- pr_warn("Unknown node for memory at 0x%llx, assuming node 0\n", addr);
- return 0;
-}
--- a/arch/ia64/mm/numa.c~mm-memory_hotplug-introduce-default-dummy-memory_add_physaddr_to_nid
+++ a/arch/ia64/mm/numa.c
@@ -106,7 +106,5 @@ int memory_add_physaddr_to_nid(u64 addr)
return 0;
return nid;
}
-
-EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
#endif
#endif
--- a/arch/sh/mm/init.c~mm-memory_hotplug-introduce-default-dummy-memory_add_physaddr_to_nid
+++ a/arch/sh/mm/init.c
@@ -431,15 +431,6 @@ int arch_add_memory(int nid, u64 start,
return ret;
}
-#ifdef CONFIG_NUMA
-int memory_add_physaddr_to_nid(u64 addr)
-{
- /* Node 0 for now.. */
- return 0;
-}
-EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
-#endif
-
void arch_remove_memory(int nid, u64 start, u64 size,
struct vmem_altmap *altmap)
{
--- a/arch/x86/mm/numa.c~mm-memory_hotplug-introduce-default-dummy-memory_add_physaddr_to_nid
+++ a/arch/x86/mm/numa.c
@@ -929,5 +929,4 @@ int memory_add_physaddr_to_nid(u64 start
nid = numa_meminfo.blk[0].nid;
return nid;
}
-EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
#endif
--- a/mm/memory_hotplug.c~mm-memory_hotplug-introduce-default-dummy-memory_add_physaddr_to_nid
+++ a/mm/memory_hotplug.c
@@ -350,6 +350,16 @@ int __ref __add_pages(int nid, unsigned
return err;
}
+#ifdef CONFIG_NUMA
+int __weak memory_add_physaddr_to_nid(u64 start)
+{
+ pr_info_once("Unknown target node for memory at 0x%llx, assuming node 0\n",
+ start);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
+#endif
+
/* find the smallest valid pfn in the range [start_pfn, end_pfn) */
static unsigned long find_smallest_section_pfn(int nid, struct zone *zone,
unsigned long start_pfn,
_
Patches currently in -mm which might be from justin.he@xxxxxxx are
mm-memory_hotplug-introduce-default-dummy-memory_add_physaddr_to_nid.patch
mm-memory_hotplug-fix-unpaired-mem_hotplug_begin-done.patch
