The patch titled
Subject: linux-next-git-rejects
has been removed from the -mm tree. Its filename was
linux-next-git-rejects.patch
This patch was dropped because it is obsolete
------------------------------------------------------
From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Subject: linux-next-git-rejects
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/mmp3.dtsi | 8 -
arch/x86/kernel/fpu/xstate.c | 4
drivers/net/ethernet/mellanox/mlx5/core/Kconfig | 4
drivers/platform/chrome/chromeos_pstore.c | 3
drivers/power/supply/bd70528-charger.c | 64 --------------
drivers/regulator/max8998.c | 5 -
drivers/spi/spi-dw-core.c | 13 --
drivers/spi/spi-dw-mmio.c | 10 --
drivers/spi/spi-dw-pci.c | 12 --
drivers/spi/spi-dw.h | 25 -----
fs/ext4/super.c | 4
fs/f2fs/f2fs.h | 3
fs/pstore/blk.c | 28 ------
fs/pstore/inode.c | 4
include/linux/virtio_net.h | 7 -
net/ipv4/nexthop.c | 25 -----
net/xdp/xdp_umem.c | 4
sound/usb/quirks-table.h | 18 ---
18 files changed, 241 deletions(-)
--- a/arch/arm/boot/dts/mmp3.dtsi~linux-next-git-rejects
+++ a/arch/arm/boot/dts/mmp3.dtsi
@@ -201,11 +201,7 @@
status = "disabled";
};
-<<<<<<< HEAD
- hsic_phy0: hsic-phy@f0001800 {
-=======
hsic_phy0: usb-phy@f0001800 {
->>>>>>> linux-next/akpm-base
compatible = "marvell,mmp3-hsic-phy";
reg = <0xf0001800 0x40>;
#phy-cells = <0>;
@@ -226,11 +222,7 @@
status = "disabled";
};
-<<<<<<< HEAD
- hsic_phy1: hsic-phy@f0002800 {
-=======
hsic_phy1: usb-phy@f0002800 {
->>>>>>> linux-next/akpm-base
compatible = "marvell,mmp3-hsic-phy";
reg = <0xf0002800 0x40>;
#phy-cells = <0>;
--- a/arch/x86/kernel/fpu/xstate.c~linux-next-git-rejects
+++ a/arch/x86/kernel/fpu/xstate.c
@@ -1062,11 +1062,7 @@ int copy_xstate_to_kernel(void *kbuf, st
*/
memset(&header, 0, sizeof(header));
header.xfeatures = xsave->header.xfeatures;
-<<<<<<< HEAD
- header.xfeatures &= ~XFEATURE_MASK_SUPERVISOR;
-=======
header.xfeatures &= xfeatures_mask_user();
->>>>>>> linux-next/akpm-base
if (header.xfeatures & XFEATURE_MASK_FP)
copy_part(0, off_mxcsr,
--- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig~linux-next-git-rejects
+++ a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
@@ -95,11 +95,7 @@ config MLX5_CLS_ACT
config MLX5_TC_CT
bool "MLX5 TC connection tracking offload support"
-<<<<<<< HEAD
- depends on MLX5_ESWITCH && NF_FLOW_TABLE && NET_ACT_CT && NET_TC_SKB_EXT
-=======
depends on MLX5_CLS_ACT && NF_FLOW_TABLE && NET_ACT_CT && NET_TC_SKB_EXT
->>>>>>> linux-next/akpm-base
default y
help
Say Y here if you want to support offloading connection tracking rules
--- a/drivers/platform/chrome/chromeos_pstore.c~linux-next-git-rejects
+++ a/drivers/platform/chrome/chromeos_pstore.c
@@ -57,10 +57,7 @@ static struct ramoops_platform_data chro
.record_size = 0x40000,
.console_size = 0x20000,
.ftrace_size = 0x20000,
-<<<<<<< HEAD
-=======
.pmsg_size = 0x20000,
->>>>>>> linux-next/akpm-base
.max_reason = KMSG_DUMP_OOPS,
};
--- a/drivers/power/supply/bd70528-charger.c~linux-next-git-rejects
+++ a/drivers/power/supply/bd70528-charger.c
@@ -336,18 +336,7 @@ static int bd70528_get_present(struct bd
return 0;
}
-<<<<<<< HEAD
-struct bd70528_linear_range {
- int min;
- int step;
- int vals;
- int low_sel;
-};
-
-static const struct bd70528_linear_range current_limit_ranges[] = {
-=======
static const struct linear_range current_limit_ranges[] = {
->>>>>>> linux-next/akpm-base
{
.min = 5,
.step = 1,
@@ -409,59 +398,6 @@ static const struct bd70528_linear_range
#define MAX_WARM_CHG_CURR_SEL 0x1f
#define MIN_CHG_CURR_SEL 0x0
-<<<<<<< HEAD
-static int find_value_for_selector_low(const struct bd70528_linear_range *r,
- int selectors, unsigned int sel,
- unsigned int *val)
-{
- int i;
-
- for (i = 0; i < selectors; i++) {
- if (r[i].low_sel <= sel && r[i].low_sel + r[i].vals >= sel) {
- *val = r[i].min + (sel - r[i].low_sel) * r[i].step;
- return 0;
- }
- }
- return -EINVAL;
-}
-
-/*
- * For BD70528 voltage/current limits we happily accept any value which
- * belongs the range. We could check if value matching the selector is
- * desired by computing the range min + (sel - sel_low) * range step - but
- * I guess it is enough if we use voltage/current which is closest (below)
- * the requested?
- */
-static int find_selector_for_value_low(const struct bd70528_linear_range *r,
- int selectors, unsigned int val,
- unsigned int *sel, bool *found)
-{
- int i;
- int ret = -EINVAL;
-
- *found = false;
- for (i = 0; i < selectors; i++) {
- if (r[i].min <= val) {
- if (r[i].min + r[i].step * r[i].vals >= val) {
- *found = true;
- *sel = r[i].low_sel + (val - r[i].min) /
- r[i].step;
- ret = 0;
- break;
- }
- /*
- * If the range max is smaller than requested
- * we can set the max supported value from range
- */
- *sel = r[i].low_sel + r[i].vals;
- ret = 0;
- }
- }
- return ret;
-}
-
-=======
->>>>>>> linux-next/akpm-base
static int get_charge_current(struct bd70528_psy *bdpsy, int *ma)
{
unsigned int sel;
--- a/drivers/regulator/max8998.c~linux-next-git-rejects
+++ a/drivers/regulator/max8998.c
@@ -371,13 +371,8 @@ static int max8998_set_voltage_buck_time
return 0;
}
-<<<<<<< HEAD
-static int max8998_set_current_limit(struct regulator_dev *rdev,
- int min_uA, int max_uA)
-=======
int max8998_set_current_limit(struct regulator_dev *rdev,
int min_uA, int max_uA)
->>>>>>> linux-next/akpm-base
{
struct max8998_data *max8998 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8998->iodev->i2c;
--- a/drivers/spi/spi-dw-core.c~linux-next-git-rejects
+++ a/drivers/spi/spi-dw-core.c
@@ -29,13 +29,6 @@ struct chip_data {
};
#ifdef CONFIG_DEBUG_FS
-<<<<<<< HEAD:drivers/spi/spi-dw-core.c
-
-#define DW_SPI_DBGFS_REG(_name, _off) \
-{ \
- .name = _name, \
- .offset = _off, \
-=======
#define SPI_REGS_BUFSIZE 1024
static ssize_t dw_spi_show_regs(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
@@ -89,7 +82,6 @@ static ssize_t dw_spi_show_regs(struct f
ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
kfree(buf);
return ret;
->>>>>>> linux-next/akpm-base:drivers/spi/spi-dw.c
}
static const struct debugfs_reg32 dw_spi_dbgfs_regs[] = {
@@ -411,16 +403,11 @@ static int dw_spi_transfer_one(struct sp
spi_enable_chip(dws, 1);
-<<<<<<< HEAD:drivers/spi/spi-dw-core.c
- if (dws->dma_mapped)
- return dws->dma_ops->dma_transfer(dws, transfer);
-=======
if (dws->dma_mapped) {
ret = dws->dma_ops->dma_transfer(dws, transfer);
if (ret < 0)
return ret;
}
->>>>>>> linux-next/akpm-base:drivers/spi/spi-dw.c
return 1;
}
--- a/drivers/spi/spi-dw.h~linux-next-git-rejects
+++ a/drivers/spi/spi-dw.h
@@ -2,11 +2,6 @@
#ifndef DW_SPI_HEADER_H
#define DW_SPI_HEADER_H
-<<<<<<< HEAD
-#include <linux/completion.h>
-#include <linux/debugfs.h>
-=======
->>>>>>> linux-next/akpm-base
#include <linux/irqreturn.h>
#include <linux/io.h>
#include <linux/scatterlist.h>
@@ -152,10 +147,6 @@ struct dw_spi {
unsigned long dma_chan_busy;
dma_addr_t dma_addr; /* phy address of the Data register */
const struct dw_spi_dma_ops *dma_ops;
-<<<<<<< HEAD
- struct completion dma_completion;
-=======
->>>>>>> linux-next/akpm-base
#ifdef CONFIG_DEBUG_FS
struct dentry *debugfs;
@@ -264,25 +255,9 @@ extern u32 dw_spi_update_cr0(struct spi_
extern u32 dw_spi_update_cr0_v1_01a(struct spi_controller *master,
struct spi_device *spi,
struct spi_transfer *transfer);
-<<<<<<< HEAD
-
-#ifdef CONFIG_SPI_DW_DMA
-
-extern void dw_spi_dma_setup_mfld(struct dw_spi *dws);
-extern void dw_spi_dma_setup_generic(struct dw_spi *dws);
-
-#else
-
-static inline void dw_spi_dma_setup_mfld(struct dw_spi *dws) {}
-static inline void dw_spi_dma_setup_generic(struct dw_spi *dws) {}
-
-#endif /* !CONFIG_SPI_DW_DMA */
-
-=======
/* platform related setup */
extern int dw_spi_mid_init_mfld(struct dw_spi *dws);
extern int dw_spi_mid_init_generic(struct dw_spi *dws);
->>>>>>> linux-next/akpm-base
#endif /* DW_SPI_HEADER_H */
--- a/drivers/spi/spi-dw-mmio.c~linux-next-git-rejects
+++ a/drivers/spi/spi-dw-mmio.c
@@ -151,11 +151,6 @@ static int dw_spi_dw_apb_init(struct pla
/* Register hook to configure CTRLR0 */
dwsmmio->dws.update_cr0 = dw_spi_update_cr0;
-<<<<<<< HEAD
- dw_spi_dma_setup_generic(&dwsmmio->dws);
-
-=======
->>>>>>> linux-next/akpm-base
return 0;
}
@@ -165,11 +160,6 @@ static int dw_spi_dwc_ssi_init(struct pl
/* Register hook to configure CTRLR0 */
dwsmmio->dws.update_cr0 = dw_spi_update_cr0_v1_01a;
-<<<<<<< HEAD
- dw_spi_dma_setup_generic(&dwsmmio->dws);
-
-=======
->>>>>>> linux-next/akpm-base
return 0;
}
--- a/drivers/spi/spi-dw-pci.c~linux-next-git-rejects
+++ a/drivers/spi/spi-dw-pci.c
@@ -67,31 +67,19 @@ static int spi_generic_init(struct dw_sp
}
static struct spi_pci_desc spi_pci_mid_desc_1 = {
-<<<<<<< HEAD
- .setup = spi_mid_init,
-=======
.setup = dw_spi_mid_init_mfld,
->>>>>>> linux-next/akpm-base
.num_cs = 5,
.bus_num = 0,
};
static struct spi_pci_desc spi_pci_mid_desc_2 = {
-<<<<<<< HEAD
- .setup = spi_mid_init,
-=======
.setup = dw_spi_mid_init_mfld,
->>>>>>> linux-next/akpm-base
.num_cs = 2,
.bus_num = 1,
};
static struct spi_pci_desc spi_pci_ehl_desc = {
-<<<<<<< HEAD
- .setup = spi_generic_init,
-=======
.setup = dw_spi_mid_init_generic,
->>>>>>> linux-next/akpm-base
.num_cs = 2,
.bus_num = -1,
.max_freq = 100000000,
--- a/fs/ext4/super.c~linux-next-git-rejects
+++ a/fs/ext4/super.c
@@ -1824,11 +1824,7 @@ static const struct mount_opts {
{Opt_jqfmt_vfsv1, QFMT_VFS_V1, MOPT_QFMT},
{Opt_max_dir_size_kb, 0, MOPT_GTE0},
{Opt_test_dummy_encryption, 0, MOPT_STRING},
-<<<<<<< HEAD
- {Opt_nombcache, EXT4_MOUNT_NO_MBCACHE, MOPT_SET},
-=======
{Opt_nombcache, EXT4_MOUNT_NO_MBCACHE, MOPT_SET | MOPT_NO_REMOUNT},
->>>>>>> linux-next/akpm-base
{Opt_err, 0, 0}
};
--- a/fs/f2fs/f2fs.h~linux-next-git-rejects
+++ a/fs/f2fs/f2fs.h
@@ -139,10 +139,7 @@ struct f2fs_mount_info {
int fs_mode; /* fs mode: LFS or ADAPTIVE */
int bggc_mode; /* bggc mode: off, on or sync */
struct fscrypt_dummy_context dummy_enc_ctx; /* test dummy encryption */
-<<<<<<< HEAD
-=======
block_t unusable_cap_perc; /* percentage for cap */
->>>>>>> linux-next/akpm-base
block_t unusable_cap; /* Amount of space allowed to be
* unusable when disabling checkpoint
*/
--- a/fs/pstore/blk.c~linux-next-git-rejects
+++ a/fs/pstore/blk.c
@@ -113,12 +113,8 @@ static int __register_pstore_device(stru
{
int ret;
-<<<<<<< HEAD
- lockdep_assert_held(&pstore_blk_lock);
-=======
if (WARN_ON(!mutex_is_locked(&pstore_blk_lock)))
return -EINVAL;
->>>>>>> linux-next/akpm-base
if (!dev || !dev->total_size || !dev->read || !dev->write)
return -EINVAL;
@@ -190,11 +186,7 @@ EXPORT_SYMBOL_GPL(register_pstore_device
static void __unregister_pstore_device(struct pstore_device_info *dev)
{
-<<<<<<< HEAD
- lockdep_assert_held(&pstore_blk_lock);
-=======
WARN_ON(!mutex_is_locked(&pstore_blk_lock));
->>>>>>> linux-next/akpm-base
if (pstore_zone_info && pstore_zone_info->read == dev->read) {
unregister_pstore_zone(pstore_zone_info);
kfree(pstore_zone_info);
@@ -232,12 +224,8 @@ static struct block_device *psblk_get_bd
fmode_t mode = FMODE_READ | FMODE_WRITE;
sector_t nr_sects;
-<<<<<<< HEAD
- lockdep_assert_held(&pstore_blk_lock);
-=======
if (WARN_ON(!mutex_is_locked(&pstore_blk_lock)))
return ERR_PTR(-EINVAL);
->>>>>>> linux-next/akpm-base
if (pstore_zone_info)
return ERR_PTR(-EBUSY);
@@ -279,20 +267,12 @@ static void psblk_put_bdev(struct block_
{
fmode_t mode = FMODE_READ | FMODE_WRITE;
-<<<<<<< HEAD
- lockdep_assert_held(&pstore_blk_lock);
-
- if (!bdev)
- return;
-
-=======
if (!bdev)
return;
if (WARN_ON(!mutex_is_locked(&pstore_blk_lock)))
return;
->>>>>>> linux-next/akpm-base
if (holder)
mode |= FMODE_EXCL;
blkdev_put(bdev, mode);
@@ -390,12 +370,8 @@ static int __register_pstore_blk(struct
void *holder = blkdev;
int ret = -ENODEV;
-<<<<<<< HEAD
- lockdep_assert_held(&pstore_blk_lock);
-=======
if (WARN_ON(!mutex_is_locked(&pstore_blk_lock)))
return -EINVAL;
->>>>>>> linux-next/akpm-base
/* hold bdev exclusively */
memset(&binfo, 0, sizeof(binfo));
@@ -473,11 +449,7 @@ static void __unregister_pstore_blk(unsi
struct pstore_device_info dev = { .read = psblk_generic_blk_read };
void *holder = blkdev;
-<<<<<<< HEAD
- lockdep_assert_held(&pstore_blk_lock);
-=======
WARN_ON(!mutex_is_locked(&pstore_blk_lock));
->>>>>>> linux-next/akpm-base
if (psblk_bdev && MAJOR(psblk_bdev->bd_dev) == major) {
__unregister_pstore_device(&dev);
psblk_put_bdev(psblk_bdev, holder);
--- a/fs/pstore/inode.c~linux-next-git-rejects
+++ a/fs/pstore/inode.c
@@ -287,11 +287,7 @@ static const struct super_operations pst
.show_options = pstore_show_options,
};
-<<<<<<< HEAD
-static struct dentry *psinfo_lock_root(void)
-=======
struct dentry *psinfo_lock_root(void)
->>>>>>> linux-next/akpm-base
{
struct dentry *root;
--- a/include/linux/virtio_net.h~linux-next-git-rejects
+++ a/include/linux/virtio_net.h
@@ -111,18 +111,11 @@ retry:
u16 gso_size = __virtio16_to_cpu(little_endian, hdr->gso_size);
struct skb_shared_info *shinfo = skb_shinfo(skb);
-<<<<<<< HEAD
- /* Too small packets are not really GSO ones. */
- if (skb->len - p_off > gso_size) {
- shinfo->gso_size = gso_size;
- shinfo->gso_type = gso_type;
-=======
if (skb->len - p_off <= gso_size)
return -EINVAL;
skb_shinfo(skb)->gso_size = gso_size;
skb_shinfo(skb)->gso_type = gso_type;
->>>>>>> linux-next/akpm-base
/* Header must be checked, and gso_segs computed. */
shinfo->gso_type |= SKB_GSO_DODGY;
--- a/net/ipv4/nexthop.c~linux-next-git-rejects
+++ a/net/ipv4/nexthop.c
@@ -788,7 +788,6 @@ static void remove_nh_grp_entry(struct n
newg->has_v4 = nhg->has_v4;
newg->mpath = nhg->mpath;
newg->num_nh = nhg->num_nh;
-<<<<<<< HEAD
/* copy old entries to new except the one getting removed */
nhges = nhg->nh_entries;
@@ -811,30 +810,6 @@ static void remove_nh_grp_entry(struct n
nh_group_rebalance(newg);
rcu_assign_pointer(nhp->nh_grp, newg);
-=======
-
- /* copy old entries to new except the one getting removed */
- nhges = nhg->nh_entries;
- new_nhges = newg->nh_entries;
- for (i = 0, j = 0; i < nhg->num_nh; ++i) {
- /* current nexthop getting removed */
- if (nhg->nh_entries[i].nh == nh) {
- newg->num_nh--;
- continue;
- }
-
- list_del(&nhges[i].nh_list);
- new_nhges[j].nh_parent = nhges[i].nh_parent;
- new_nhges[j].nh = nhges[i].nh;
- new_nhges[j].weight = nhges[i].weight;
- list_add(&new_nhges[j].nh_list, &new_nhges[j].nh->grp_list);
- j++;
- }
-
- nh_group_rebalance(newg);
- rcu_assign_pointer(nhp->nh_grp, newg);
-
->>>>>>> linux-next/akpm-base
list_del(&nhge->nh_list);
nexthop_put(nhge->nh);
--- a/net/xdp/xdp_umem.c~linux-next-git-rejects
+++ a/net/xdp/xdp_umem.c
@@ -355,11 +355,7 @@ static int xdp_umem_reg(struct xdp_umem
umem->size = size;
umem->headroom = headroom;
-<<<<<<< HEAD
- umem->chunk_size_nohr = chunk_size - headroom;
-=======
umem->chunk_size = chunk_size;
->>>>>>> linux-next/akpm-base
umem->npgs = (u32)npgs;
umem->pgs = NULL;
umem->user = NULL;
--- a/sound/usb/quirks-table.h~linux-next-git-rejects
+++ a/sound/usb/quirks-table.h
@@ -3549,23 +3549,6 @@ ALC1220_VB_DESKTOP(0x26ce, 0x0a01), /* A
*/
{
USB_DEVICE(0x0414, 0xa000),
-<<<<<<< HEAD
- .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
- .vendor_name = "Gigabyte",
- .product_name = "Aorus Master Front Headphone",
- .profile_name = "Gigabyte-Aorus-Master-Front-Headphone",
- .ifnum = QUIRK_NO_INTERFACE
- }
-},
-{
- USB_DEVICE(0x0414, 0xa001),
- .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
- .vendor_name = "Gigabyte",
- .product_name = "Aorus Master Main Audio",
- .profile_name = "Gigabyte-Aorus-Master-Main-Audio",
- .ifnum = QUIRK_NO_INTERFACE
- }
-=======
QUIRK_DEVICE_PROFILE("Gigabyte", "Aorus Master Front Headphone",
"Gigabyte-Aorus-Master-Front-Headphone")
},
@@ -3573,7 +3556,6 @@ ALC1220_VB_DESKTOP(0x26ce, 0x0a01), /* A
USB_DEVICE(0x0414, 0xa001),
QUIRK_DEVICE_PROFILE("Gigabyte", "Aorus Master Main Audio",
"Gigabyte-Aorus-Master-Main-Audio")
->>>>>>> linux-next/akpm-base
},
#undef USB_DEVICE_VENDOR_SPEC
_
Patches currently in -mm which might be from akpm@xxxxxxxxxxxxxxxxxxxx are
arch-parisc-include-asm-pgtableh-remove-unused-old_pte.patch
mm-slub-add-panic_on_error-to-the-debug-facilities-fix.patch
drivers-tty-serial-sh-scic-suppress-uninitialized-var-warning.patch
mm.patch
mm-free_area_init-allow-defining-max_zone_pfn-in-descending-order-fix-2-fix.patch
mm-page_alloc-skip-waternark_boost-for-atomic-order-0-allocations-fix.patch
arch-kunmap-remove-duplicate-kunmap-implementations-fix.patch
arch-kmap_atomic-consolidate-duplicate-code-checkpatch-fixes.patch
arch-kunmap_atomic-consolidate-duplicate-code-checkpatch-fixes.patch
kmap-consolidate-kmap_prot-definitions-checkpatch-fixes.patch
mm-add-debug_wx-support-fix.patch
riscv-support-debug_wx-fix.patch
mm-replace-zero-length-array-with-flexible-array-member-fix.patch
mm-hugetlb-fix-a-typo-in-comment-manitained-maintained-v2-checkpatch-fixes.patch
lib-make-a-test-module-with-get_count_order-long-fix.patch
seq_file-introduce-define_seq_attribute-helper-macro-checkpatch-fixes.patch
ipc-convert-ipcs_idr-to-xarray-update-fix.patch
linux-next-pre.patch
linux-next-rejects.patch
linux-next-post.patch
kernel-add-panic_on_taint-fix.patch
mm-consolidate-pgd_index-and-pgd_offset_k-definitions-fix.patch
mmap-locking-api-convert-mmap_sem-call-sites-missed-by-coccinelle-fix.patch
mmap-locking-api-convert-mmap_sem-call-sites-missed-by-coccinelle-fix-fix.patch
mmap-locking-api-convert-mmap_sem-call-sites-missed-by-coccinelle-fix-fix-fix.patch
mmap-locking-api-rename-mmap_sem-to-mmap_lock-fix.patch
mmap-locking-api-convert-mmap_sem-comments-fix.patch
mmap-locking-api-convert-mmap_sem-comments-fix-fix.patch
mmap-locking-api-convert-mmap_sem-comments-fix-fix-fix.patch
mm-pass-task-and-mm-to-do_madvise.patch
mm-introduce-external-memory-hinting-api-fix-2-fix.patch
mm-support-vector-address-ranges-for-process_madvise-fix-fix-fix-fix-fix.patch
maccess-unify-the-probe-kernel-arch-hooks-fix.patch
bpf-bpf_seq_printf-handle-potentially-unsafe-format-string-better.patch
bpf-bpf_seq_printf-handle-potentially-unsafe-format-string-better-fix.patch
maccess-always-use-strict-semantics-for-probe_kernel_read-fix.patch
x86-use-non-set_fs-based-maccess-routines-checkpatch-fixes.patch
doc-cgroup-update-note-about-conditions-when-oom-killer-is-invoked-fix.patch
sh-convert-ins-outs-macros-to-inline-functions-checkpatch-fixes.patch
kernel-forkc-export-kernel_thread-to-modules.patch
