[merged] thermal-intel_pch-switch-to-use-linux-unitsh-helpers.patch removed from -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch titled
     Subject: thermal: intel_pch: switch to use <linux/units.h> helpers
has been removed from the -mm tree.  Its filename was
     thermal-intel_pch-switch-to-use-linux-unitsh-helpers.patch

This patch was dropped because it was merged into mainline or a subsystem tree

------------------------------------------------------
From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
Subject: thermal: intel_pch: switch to use <linux/units.h> helpers

This switches the intel pch thermal driver to use
deci_kelvin_to_millicelsius() in <linux/units.h> instead of helpers in
<linux/thermal.h>.

This is preparation for centralizing the kelvin to/from Celsius conversion
helpers in <linux/units.h>.

Link: http://lkml.kernel.org/r/1576386975-7941-7-git-send-email-akinobu.mita@xxxxxxxxx
Signed-off-by: Akinobu Mita <akinobu.mita@xxxxxxxxx>
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Cc: Sujith Thomas <sujith.thomas@xxxxxxxxx>
Cc: Darren Hart <dvhart@xxxxxxxxxxxxx>
Cc: Andy Shevchenko <andy@xxxxxxxxxxxxx>
Cc: Zhang Rui <rui.zhang@xxxxxxxxx>
Cc: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
Cc: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
Cc: Jean Delvare <jdelvare@xxxxxxxx>
Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
Cc: Keith Busch <kbusch@xxxxxxxxxx>
Cc: Jens Axboe <axboe@xxxxxx>
Cc: Christoph Hellwig <hch@xxxxxx>
Cc: Sagi Grimberg <sagi@xxxxxxxxxxx>
Cc: Emmanuel Grumbach <emmanuel.grumbach@xxxxxxxxx>
Cc: Hartmut Knaack <knaack.h@xxxxxx>
Cc: Johannes Berg <johannes.berg@xxxxxxxxx>
Cc: Jonathan Cameron <jic23@xxxxxxxxxx>
Cc: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Cc: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Cc: Lars-Peter Clausen <lars@xxxxxxxxxx>
Cc: Luca Coelho <luciano.coelho@xxxxxxxxx>
Cc: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
Cc: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 drivers/thermal/intel/intel_pch_thermal.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/thermal/intel/intel_pch_thermal.c~thermal-intel_pch-switch-to-use-linux-unitsh-helpers
+++ a/drivers/thermal/intel/intel_pch_thermal.c
@@ -13,6 +13,7 @@
 #include <linux/pci.h>
 #include <linux/acpi.h>
 #include <linux/thermal.h>
+#include <linux/units.h>
 #include <linux/pm.h>
 
 /* Intel PCH thermal Device IDs */
@@ -93,7 +94,7 @@ static void pch_wpt_add_acpi_psv_trip(st
 		if (ACPI_SUCCESS(status)) {
 			unsigned long trip_temp;
 
-			trip_temp = DECI_KELVIN_TO_MILLICELSIUS(r);
+			trip_temp = deci_kelvin_to_millicelsius(r);
 			if (trip_temp) {
 				ptd->psv_temp = trip_temp;
 				ptd->psv_trip_id = *nr_trips;
_

Patches currently in -mm which might be from akinobu.mita@xxxxxxxxx are





[Index of Archives]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux