The patch titled
Subject: lib/zlib: add s390 hardware support for kernel zlib_inflate
has been removed from the -mm tree. Its filename was
lib-zlib-add-s390-hardware-support-for-kernel-zlib_inflate.patch
This patch was dropped because an updated version will be merged
------------------------------------------------------
From: Mikhail Zaslonko <zaslonko@xxxxxxxxxxxxx>
Subject: lib/zlib: add s390 hardware support for kernel zlib_inflate
Add decompression functions to zlib_dfltcc library. Update zlib_inflate
functions with the hooks for s390 hardware support and adjust workspace
structures with extra parameter lists required for hardware inflate
decompression.
Link: http://lkml.kernel.org/r/20191209152948.37080-4-zaslonko@xxxxxxxxxxxxx
Signed-off-by: Ilya Leoshkevich <iii@xxxxxxxxxxxxx>
Signed-off-by: Mikhail Zaslonko <zaslonko@xxxxxxxxxxxxx>
Co-developed-by: Ilya Leoshkevich <iii@xxxxxxxxxxxxx>
Cc: Chris Mason <clm@xxxxxx>
Cc: Christian Borntraeger <borntraeger@xxxxxxxxxx>
Cc: David Sterba <dsterba@xxxxxxxx>
Cc: Eduard Shishkin <edward6@xxxxxxxxxxxxx>
Cc: Heiko Carstens <heiko.carstens@xxxxxxxxxx>
Cc: Josef Bacik <josef@xxxxxxxxxxxxxx>
Cc: Richard Purdie <rpurdie@xxxxxxxxx>
Cc: Vasily Gorbik <gor@xxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
lib/Kconfig | 8 +
lib/decompress_inflate.c | 13 ++
lib/zlib_dfltcc/Makefile | 2
lib/zlib_dfltcc/dfltcc.h | 28 +++++
lib/zlib_dfltcc/dfltcc_inflate.c | 143 +++++++++++++++++++++++++++++
lib/zlib_inflate/inflate.c | 32 ++++--
lib/zlib_inflate/inflate.h | 8 +
lib/zlib_inflate/infutil.h | 18 +++
8 files changed, 241 insertions(+), 11 deletions(-)
--- a/lib/decompress_inflate.c~lib-zlib-add-s390-hardware-support-for-kernel-zlib_inflate
+++ a/lib/decompress_inflate.c
@@ -10,6 +10,10 @@
#include "zlib_inflate/inftrees.c"
#include "zlib_inflate/inffast.c"
#include "zlib_inflate/inflate.c"
+#ifdef CONFIG_ZLIB_DFLTCC_INFLATE
+#include "zlib_dfltcc/dfltcc.c"
+#include "zlib_dfltcc/dfltcc_inflate.c"
+#endif
#else /* STATIC */
/* initramfs et al: linked */
@@ -76,7 +80,12 @@ STATIC int INIT __gunzip(unsigned char *
}
strm->workspace = malloc(flush ? zlib_inflate_workspacesize() :
+#ifdef CONFIG_ZLIB_DFLTCC_INFLATE
+ /* Always allocate the full workspace for DFLTCC */
+ zlib_inflate_workspacesize());
+#else
sizeof(struct inflate_state));
+#endif
if (strm->workspace == NULL) {
error("Out of memory while allocating workspace");
goto gunzip_nomem4;
@@ -123,10 +132,14 @@ STATIC int INIT __gunzip(unsigned char *
rc = zlib_inflateInit2(strm, -MAX_WBITS);
+#ifdef CONFIG_ZLIB_DFLTCC_INFLATE
+ /* Always keep the window for DFLTCC */
+#else
if (!flush) {
WS(strm)->inflate_state.wsize = 0;
WS(strm)->inflate_state.window = NULL;
}
+#endif
while (rc == Z_OK) {
if (strm->avail_in == 0) {
--- a/lib/Kconfig~lib-zlib-add-s390-hardware-support-for-kernel-zlib_inflate
+++ a/lib/Kconfig
@@ -292,6 +292,14 @@ config ZLIB_DFLTCC_DEFLATE
help
Enable s390x hardware support for zlib deflate in the kernel.
+config ZLIB_DFLTCC_INFLATE
+ def_bool y
+ depends on ZLIB_DFLTCC && ZLIB_INFLATE
+ prompt "Enable s390x hardware support for zlib inflate functions"
+ help
+ Enable s390x hardware support for zlib inflate in the kernel.
+
+
config LZO_COMPRESS
tristate
--- a/lib/zlib_dfltcc/dfltcc.h~lib-zlib-add-s390-hardware-support-for-kernel-zlib_inflate
+++ a/lib/zlib_dfltcc/dfltcc.h
@@ -104,6 +104,14 @@ int dfltcc_deflate(z_streamp strm,
int flush,
block_state *result);
void dfltcc_reset(z_streamp strm, uInt size);
+int dfltcc_can_inflate(z_streamp strm);
+typedef enum {
+ DFLTCC_INFLATE_CONTINUE,
+ DFLTCC_INFLATE_BREAK,
+ DFLTCC_INFLATE_SOFTWARE,
+} dfltcc_inflate_action;
+dfltcc_inflate_action dfltcc_inflate(z_streamp strm,
+ int flush, int *ret);
#define DEFLATE_RESET_HOOK(strm) \
dfltcc_reset((strm), sizeof(deflate_state))
@@ -112,4 +120,24 @@ void dfltcc_reset(z_streamp strm, uInt s
#define DEFLATE_NEED_CHECKSUM(strm) (!dfltcc_can_deflate((strm)))
+#define INFLATE_RESET_HOOK(strm) \
+ dfltcc_reset((strm), sizeof(struct inflate_state))
+
+#define INFLATE_TYPEDO_HOOK(strm, flush) \
+ if (dfltcc_can_inflate((strm))) { \
+ dfltcc_inflate_action action; \
+\
+ RESTORE(); \
+ action = dfltcc_inflate((strm), (flush), &ret); \
+ LOAD(); \
+ if (action == DFLTCC_INFLATE_CONTINUE) \
+ break; \
+ else if (action == DFLTCC_INFLATE_BREAK) \
+ goto inf_leave; \
+ }
+
+#define INFLATE_NEED_CHECKSUM(strm) (!dfltcc_can_inflate((strm)))
+
+#define INFLATE_NEED_UPDATEWINDOW(strm) (!dfltcc_can_inflate((strm)))
+
#endif /* DFLTCC_H */
--- /dev/null
+++ a/lib/zlib_dfltcc/dfltcc_inflate.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: Zlib
+
+#include "../zlib_inflate/inflate.h"
+#include "dfltcc_util.h"
+#include "dfltcc.h"
+#include <linux/zutil.h>
+
+/*
+ * Expand.
+ */
+int dfltcc_can_inflate(
+ z_streamp strm
+)
+{
+ struct inflate_state *state = (struct inflate_state *)strm->state;
+ struct dfltcc_state *dfltcc_state = GET_DFLTCC_STATE(state);
+
+ /* Unsupported compression settings */
+ if (state->wbits != HB_BITS)
+ return 0;
+
+ /* Unsupported hardware */
+ return is_bit_set(dfltcc_state->af.fns, DFLTCC_XPND) &&
+ is_bit_set(dfltcc_state->af.fmts, DFLTCC_FMT0);
+}
+
+static int dfltcc_was_inflate_used(
+ z_streamp strm
+)
+{
+ struct inflate_state *state = (struct inflate_state *)strm->state;
+ struct dfltcc_param_v0 *param = &GET_DFLTCC_STATE(state)->param;
+
+ return !param->nt;
+}
+
+static int dfltcc_inflate_disable(
+ z_streamp strm
+)
+{
+ struct inflate_state *state = (struct inflate_state *)strm->state;
+ struct dfltcc_state *dfltcc_state = GET_DFLTCC_STATE(state);
+
+ if (!dfltcc_can_inflate(strm))
+ return 0;
+ if (dfltcc_was_inflate_used(strm))
+ /* DFLTCC has already decompressed some data. Since there is not
+ * enough information to resume decompression in software, the call
+ * must fail.
+ */
+ return 1;
+ /* DFLTCC was not used yet - decompress in software */
+ memset(&dfltcc_state->af, 0, sizeof(dfltcc_state->af));
+ return 0;
+}
+
+static dfltcc_cc dfltcc_xpnd(
+ z_streamp strm
+)
+{
+ struct inflate_state *state = (struct inflate_state *)strm->state;
+ struct dfltcc_param_v0 *param = &GET_DFLTCC_STATE(state)->param;
+ size_t avail_in = strm->avail_in;
+ size_t avail_out = strm->avail_out;
+ dfltcc_cc cc;
+
+ cc = dfltcc(DFLTCC_XPND | HBT_CIRCULAR,
+ param, &strm->next_out, &avail_out,
+ &strm->next_in, &avail_in, state->window);
+ strm->avail_in = avail_in;
+ strm->avail_out = avail_out;
+ return cc;
+}
+
+dfltcc_inflate_action dfltcc_inflate(
+ z_streamp strm,
+ int flush,
+ int *ret
+)
+{
+ struct inflate_state *state = (struct inflate_state *)strm->state;
+ struct dfltcc_state *dfltcc_state = GET_DFLTCC_STATE(state);
+ struct dfltcc_param_v0 *param = &dfltcc_state->param;
+ dfltcc_cc cc;
+
+ if (flush == Z_BLOCK) {
+ /* DFLTCC does not support stopping on block boundaries */
+ if (dfltcc_inflate_disable(strm)) {
+ *ret = Z_STREAM_ERROR;
+ return DFLTCC_INFLATE_BREAK;
+ } else
+ return DFLTCC_INFLATE_SOFTWARE;
+ }
+
+ if (state->last) {
+ if (state->bits != 0) {
+ strm->next_in++;
+ strm->avail_in--;
+ state->bits = 0;
+ }
+ state->mode = CHECK;
+ return DFLTCC_INFLATE_CONTINUE;
+ }
+
+ if (strm->avail_in == 0 && !param->cf)
+ return DFLTCC_INFLATE_BREAK;
+
+ if (!state->window || state->wsize == 0) {
+ state->mode = MEM;
+ return DFLTCC_INFLATE_CONTINUE;
+ }
+
+ /* Translate stream to parameter block */
+ param->cvt = CVT_ADLER32;
+ param->sbb = state->bits;
+ param->hl = state->whave; /* Software and hardware history formats match */
+ param->ho = (state->write - state->whave) & ((1 << HB_BITS) - 1);
+ if (param->hl)
+ param->nt = 0; /* Honor history for the first block */
+ param->cv = state->flags ? REVERSE(state->check) : state->check;
+
+ /* Inflate */
+ do {
+ cc = dfltcc_xpnd(strm);
+ } while (cc == DFLTCC_CC_AGAIN);
+
+ /* Translate parameter block to stream */
+ strm->msg = oesc_msg(dfltcc_state->msg, param->oesc);
+ state->last = cc == DFLTCC_CC_OK;
+ state->bits = param->sbb;
+ state->whave = param->hl;
+ state->write = (param->ho + param->hl) & ((1 << HB_BITS) - 1);
+ state->check = state->flags ? REVERSE(param->cv) : param->cv;
+ if (cc == DFLTCC_CC_OP2_CORRUPT && param->oesc != 0) {
+ /* Report an error if stream is corrupted */
+ state->mode = BAD;
+ return DFLTCC_INFLATE_CONTINUE;
+ }
+ state->mode = TYPEDO;
+ /* Break if operands are exhausted, otherwise continue looping */
+ return (cc == DFLTCC_CC_OP1_TOO_SHORT || cc == DFLTCC_CC_OP2_TOO_SHORT) ?
+ DFLTCC_INFLATE_BREAK : DFLTCC_INFLATE_CONTINUE;
+}
--- a/lib/zlib_dfltcc/Makefile~lib-zlib-add-s390-hardware-support-for-kernel-zlib_inflate
+++ a/lib/zlib_dfltcc/Makefile
@@ -8,4 +8,4 @@
obj-$(CONFIG_ZLIB_DFLTCC) += zlib_dfltcc.o
-zlib_dfltcc-objs := dfltcc.o dfltcc_deflate.o dfltcc_syms.o
+zlib_dfltcc-objs := dfltcc.o dfltcc_deflate.o dfltcc_inflate.o dfltcc_syms.o
--- a/lib/zlib_inflate/inflate.c~lib-zlib-add-s390-hardware-support-for-kernel-zlib_inflate
+++ a/lib/zlib_inflate/inflate.c
@@ -15,6 +15,16 @@
#include "inffast.h"
#include "infutil.h"
+/* architecture-specific bits */
+#ifdef CONFIG_ZLIB_DFLTCC_INFLATE
+# include "../zlib_dfltcc/dfltcc.h"
+#else
+#define INFLATE_RESET_HOOK(strm) do {} while (0)
+#define INFLATE_TYPEDO_HOOK(strm, flush) do {} while (0)
+#define INFLATE_NEED_UPDATEWINDOW(strm) 1
+#define INFLATE_NEED_CHECKSUM(strm) 1
+#endif
+
int zlib_inflate_workspacesize(void)
{
return sizeof(struct inflate_workspace);
@@ -42,6 +52,7 @@ int zlib_inflateReset(z_streamp strm)
state->write = 0;
state->whave = 0;
+ INFLATE_RESET_HOOK(strm);
return Z_OK;
}
@@ -66,7 +77,15 @@ int zlib_inflateInit2(z_streamp strm, in
return Z_STREAM_ERROR;
}
state->wbits = (unsigned)windowBits;
+#ifdef CONFIG_ZLIB_DFLTCC_INFLATE
+ /*
+ * DFLTCC requires the window to be page aligned.
+ * Thus, we overallocate and take the aligned portion of the buffer.
+ */
+ state->window = PTR_ALIGN(&WS(strm)->working_window[0], PAGE_SIZE);
+#else
state->window = &WS(strm)->working_window[0];
+#endif
return zlib_inflateReset(strm);
}
@@ -227,11 +246,6 @@ static int zlib_inflateSyncPacket(z_stre
bits -= bits & 7; \
} while (0)
-/* Reverse the bytes in a 32-bit value */
-#define REVERSE(q) \
- ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
- (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
-
/*
inflate() uses a state machine to process as much input data and generate as
much output data as possible before returning. The state machine is
@@ -395,6 +409,7 @@ int zlib_inflate(z_streamp strm, int flu
if (flush == Z_BLOCK) goto inf_leave;
/* fall through */
case TYPEDO:
+ INFLATE_TYPEDO_HOOK(strm, flush);
if (state->last) {
BYTEBITS();
state->mode = CHECK;
@@ -692,7 +707,7 @@ int zlib_inflate(z_streamp strm, int flu
out -= left;
strm->total_out += out;
state->total += out;
- if (out)
+ if (INFLATE_NEED_CHECKSUM(strm) && out)
strm->adler = state->check =
UPDATE(state->check, put - out, out);
out = left;
@@ -726,7 +741,8 @@ int zlib_inflate(z_streamp strm, int flu
*/
inf_leave:
RESTORE();
- if (state->wsize || (state->mode < CHECK && out != strm->avail_out))
+ if (INFLATE_NEED_UPDATEWINDOW(strm) &&
+ (state->wsize || (state->mode < CHECK && out != strm->avail_out)))
zlib_updatewindow(strm, out);
in -= strm->avail_in;
@@ -734,7 +750,7 @@ int zlib_inflate(z_streamp strm, int flu
strm->total_in += in;
strm->total_out += out;
state->total += out;
- if (state->wrap && out)
+ if (INFLATE_NEED_CHECKSUM(strm) && state->wrap && out)
strm->adler = state->check =
UPDATE(state->check, strm->next_out - out, out);
--- a/lib/zlib_inflate/inflate.h~lib-zlib-add-s390-hardware-support-for-kernel-zlib_inflate
+++ a/lib/zlib_inflate/inflate.h
@@ -11,6 +11,8 @@
subject to change. Applications should only use zlib.h.
*/
+#include "inftrees.h"
+
/* Possible inflate modes between inflate() calls */
typedef enum {
HEAD, /* i: waiting for magic header */
@@ -108,4 +110,10 @@ struct inflate_state {
unsigned short work[288]; /* work area for code table building */
code codes[ENOUGH]; /* space for code tables */
};
+
+/* Reverse the bytes in a 32-bit value */
+#define REVERSE(q) \
+ ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
+ (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
+
#endif
--- a/lib/zlib_inflate/infutil.h~lib-zlib-add-s390-hardware-support-for-kernel-zlib_inflate
+++ a/lib/zlib_inflate/infutil.h
@@ -12,14 +12,28 @@
#define _INFUTIL_H
#include <linux/zlib.h>
+#ifdef CONFIG_ZLIB_DFLTCC_INFLATE
+#include "../zlib_dfltcc/dfltcc.h"
+#include <asm/page.h>
+#endif
/* memory allocation for inflation */
struct inflate_workspace {
struct inflate_state inflate_state;
- unsigned char working_window[1 << MAX_WBITS];
+#ifdef CONFIG_ZLIB_DFLTCC_INFLATE
+ struct dfltcc_state dfltcc_state;
+ unsigned char working_window[(1 << MAX_WBITS) + PAGE_SIZE];
+#else
+ unsigned char working_window[(1 << MAX_WBITS)];
+#endif
};
-#define WS(z) ((struct inflate_workspace *)(z->workspace))
+#ifdef CONFIG_ZLIB_DFLTCC_INFLATE
+/* dfltcc_state must be doubleword aligned for DFLTCC call */
+static_assert(offsetof(struct inflate_workspace, dfltcc_state) % 8 == 0);
+#endif
+
+#define WS(strm) ((struct inflate_workspace *)(strm->workspace))
#endif
_
Patches currently in -mm which might be from zaslonko@xxxxxxxxxxxxx are
s390-boot-add-dfltcc=-kernel-command-line-parameter.patch
lib-zlib-add-zlib_deflate_dfltcc_enabled-function.patch
btrfs-use-larger-zlib-buffer-for-s390-hardware-compression.patch
