The patch titled
Subject: lib/zlib: add s390 hardware support for kernel zlib_deflate
has been removed from the -mm tree. Its filename was
lib-zlib-add-s390-hardware-support-for-kernel-zlib_deflate.patch
This patch was dropped because an updated version will be merged
------------------------------------------------------
From: Mikhail Zaslonko <zaslonko@xxxxxxxxxxxxx>
Subject: lib/zlib: add s390 hardware support for kernel zlib_deflate
Patch series "S390 hardware compression support for kernel zlib", v2.
With IBM z15 mainframe the new DFLTCC instruction is available. It
implements deflate algorithm in hardware (Nest Acceleration Unit - NXU)
with estimated compression and decompression performance orders of
magnitude faster than the current zlib.
This patchset adds s390 hardware compression support to kernel zlib. The
code is based on the userspace zlib implementation:
https://github.com/madler/zlib/pull/410
The coding style is also preserved for future maintainability. There is
only limited set of userspace zlib functions represented in kernel. Apart
from that, all the memory allocation should be performed in advance.
Thus, the workarea structures are extended with the parameter lists
required for the DEFLATE CONVENTION CALL instruction.
Since kernel zlib itself does not support gzip headers, only Adler-32
checksum is processed (also can be produced by DFLTCC facility). Like it
was implemented for userspace, kernel zlib will compress in hardware on
level 1, and in software on all other levels. Decompression will always
happen in hardware (when enabled).
Two DFLTCC compression calls produce the same results only when they both
are made on machines of the same generation, and when the respective
buffers have the same offset relative to the start of the page. Therefore
care should be taken when using hardware compression when reproducible
results are desired. However it does always produce the standard conform
output which can be inflated anyway.
The new kernel command line parameter 'dfltcc' is introduced to configure
s390 zlib hardware support:
Format: { on | off | def_only | inf_only | always }
on: s390 zlib hardware support for compression on
level 1 and decompression (default)
off: No s390 zlib hardware support
def_only: s390 zlib hardware support for deflate
only (compression on level 1)
inf_only: s390 zlib hardware support for inflate
only (decompression)
always: Same as 'on' but ignores the selected compression
level always using hardware support (used for debugging)
The main purpose of the integration of the NXU support into the kernel
zlib is the use of hardware deflate in btrfs filesystem with on-the-fly
compression enabled. Apart from that, hardware support can also be used
during boot for decompressing the kernel or the ramdisk image
With the patch for btrfs expanding zlib buffer from 1 to 4 pages (patch 6)
the following performance results have been achieved using the ramdisk
with btrfs. These are relative numbers based on throughput rate and
compression ratio for zlib level 1:
Input data Deflate rate Inflate rate Compression ratio
NXU/Software NXU/Software NXU/Software
stream of zeroes 1.46 1.02 1.00
random ASCII data 10.44 3.00 0.96
ASCII text (dickens) 6,21 3.33 0.94
binary data (vmlinux) 8,37 3.90 1.02
This means that s390 hardware deflate can provide up to 10 times faster
compression (on level 1) and up to 4 times faster decompression (refers to
all compression levels) for btrfs zlib.
Disclaimer: Performance results are based on IBM internal tests using DD
command-line utility on btrfs on a Fedora 30 based internal driver in
native LPAR on a z15 system. Results may vary based on individual
workload, configuration and software levels.
This patch (of 6):
Create zlib_dfltcc library with the s390 DEFLATE CONVERSION CALL
implementation and related compression functions. Update zlib_deflate
functions with the hooks for s390 hardware support and adjust workspace
structures with extra parameter lists required for hardware deflate.
Link: http://lkml.kernel.org/r/20191209152948.37080-2-zaslonko@xxxxxxxxxxxxx
Signed-off-by: Ilya Leoshkevich <iii@xxxxxxxxxxxxx>
Signed-off-by: Mikhail Zaslonko <zaslonko@xxxxxxxxxxxxx>
Co-developed-by: Ilya Leoshkevich <iii@xxxxxxxxxxxxx>
Cc: Chris Mason <clm@xxxxxx>
Cc: Josef Bacik <josef@xxxxxxxxxxxxxx>
Cc: David Sterba <dsterba@xxxxxxxx>
Cc: Richard Purdie <rpurdie@xxxxxxxxx>
Cc: Heiko Carstens <heiko.carstens@xxxxxxxxxx>
Cc: Vasily Gorbik <gor@xxxxxxxxxxxxx>
Cc: Christian Borntraeger <borntraeger@xxxxxxxxxx>
Cc: Eduard Shishkin <edward6@xxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
lib/Kconfig | 14 +
lib/Makefile | 1
lib/zlib_deflate/deflate.c | 79 ++++----
lib/zlib_deflate/deftree.c | 54 -----
lib/zlib_deflate/defutil.h | 134 +++++++++++++-
lib/zlib_dfltcc/Makefile | 11 +
lib/zlib_dfltcc/dfltcc.c | 52 +++++
lib/zlib_dfltcc/dfltcc.h | 115 ++++++++++++
lib/zlib_dfltcc/dfltcc_deflate.c | 274 +++++++++++++++++++++++++++++
lib/zlib_dfltcc/dfltcc_syms.c | 17 +
lib/zlib_dfltcc/dfltcc_util.h | 119 ++++++++++++
11 files changed, 768 insertions(+), 102 deletions(-)
--- a/lib/Kconfig~lib-zlib-add-s390-hardware-support-for-kernel-zlib_deflate
+++ a/lib/Kconfig
@@ -278,6 +278,20 @@ config ZLIB_DEFLATE
tristate
select BITREVERSE
+config ZLIB_DFLTCC
+ def_bool y
+ depends on S390
+ prompt "Enable s390x DEFLATE CONVERSION CALL support for zlib"
+ help
+ Enable s390x hardware support for zlib in the kernel.
+
+config ZLIB_DFLTCC_DEFLATE
+ def_bool y
+ depends on ZLIB_DFLTCC && ZLIB_DEFLATE
+ prompt "Enable s390x hardware support for zlib deflate functions"
+ help
+ Enable s390x hardware support for zlib deflate in the kernel.
+
config LZO_COMPRESS
tristate
--- a/lib/Makefile~lib-zlib-add-s390-hardware-support-for-kernel-zlib_deflate
+++ a/lib/Makefile
@@ -140,6 +140,7 @@ obj-$(CONFIG_842_COMPRESS) += 842/
obj-$(CONFIG_842_DECOMPRESS) += 842/
obj-$(CONFIG_ZLIB_INFLATE) += zlib_inflate/
obj-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate/
+obj-$(CONFIG_ZLIB_DFLTCC) += zlib_dfltcc/
obj-$(CONFIG_REED_SOLOMON) += reed_solomon/
obj-$(CONFIG_BCH) += bch.o
obj-$(CONFIG_LZO_COMPRESS) += lzo/
--- a/lib/zlib_deflate/deflate.c~lib-zlib-add-s390-hardware-support-for-kernel-zlib_deflate
+++ a/lib/zlib_deflate/deflate.c
@@ -52,16 +52,18 @@
#include <linux/zutil.h>
#include "defutil.h"
+/* architecture-specific bits */
+#ifdef CONFIG_ZLIB_DFLTCC_DEFLATE
+# include "../zlib_dfltcc/dfltcc.h"
+#else
+#define DEFLATE_RESET_HOOK(strm) do {} while (0)
+#define DEFLATE_HOOK(strm, flush, bstate) 0
+#define DEFLATE_NEED_CHECKSUM(strm) 1
+#endif
/* ===========================================================================
* Function prototypes.
*/
-typedef enum {
- need_more, /* block not completed, need more input or more output */
- block_done, /* block flush performed */
- finish_started, /* finish started, need only more output at next deflate */
- finish_done /* finish done, accept no more input or output */
-} block_state;
typedef block_state (*compress_func) (deflate_state *s, int flush);
/* Compression function. Returns the block state after the call. */
@@ -72,7 +74,6 @@ static block_state deflate_fast (defla
static block_state deflate_slow (deflate_state *s, int flush);
static void lm_init (deflate_state *s);
static void putShortMSB (deflate_state *s, uInt b);
-static void flush_pending (z_streamp strm);
static int read_buf (z_streamp strm, Byte *buf, unsigned size);
static uInt longest_match (deflate_state *s, IPos cur_match);
@@ -98,6 +99,25 @@ static void check_match (deflate_state
* See deflate.c for comments about the MIN_MATCH+1.
*/
+/* Workspace to be allocated for deflate processing */
+typedef struct deflate_workspace {
+ /* State memory for the deflator */
+ deflate_state deflate_memory;
+#ifdef CONFIG_ZLIB_DFLTCC_DEFLATE
+ /* State memory for s390 hardware deflate */
+ struct dfltcc_state dfltcc_memory;
+#endif
+ Byte *window_memory;
+ Pos *prev_memory;
+ Pos *head_memory;
+ char *overlay_memory;
+} deflate_workspace;
+
+#ifdef CONFIG_ZLIB_DFLTCC_DEFLATE
+/* dfltcc_state must be doubleword aligned for DFLTCC call */
+static_assert(offsetof(struct deflate_workspace, dfltcc_memory) % 8 == 0);
+#endif
+
/* Values for max_lazy_match, good_match and max_chain_length, depending on
* the desired pack level (0..9). The values given below have been tuned to
* exclude worst case performance for pathological files. Better values may be
@@ -207,7 +227,15 @@ int zlib_deflateInit2(
*/
next = (char *) mem;
next += sizeof(*mem);
+#ifdef CONFIG_ZLIB_DFLTCC_DEFLATE
+ /*
+ * DFLTCC requires the window to be page aligned.
+ * Thus, we overallocate and take the aligned portion of the buffer.
+ */
+ mem->window_memory = (Byte *) PTR_ALIGN(next, PAGE_SIZE);
+#else
mem->window_memory = (Byte *) next;
+#endif
next += zlib_deflate_window_memsize(windowBits);
mem->prev_memory = (Pos *) next;
next += zlib_deflate_prev_memsize(windowBits);
@@ -277,6 +305,8 @@ int zlib_deflateReset(
zlib_tr_init(s);
lm_init(s);
+ DEFLATE_RESET_HOOK(strm);
+
return Z_OK;
}
@@ -294,35 +324,6 @@ static void putShortMSB(
put_byte(s, (Byte)(b & 0xff));
}
-/* =========================================================================
- * Flush as much pending output as possible. All deflate() output goes
- * through this function so some applications may wish to modify it
- * to avoid allocating a large strm->next_out buffer and copying into it.
- * (See also read_buf()).
- */
-static void flush_pending(
- z_streamp strm
-)
-{
- deflate_state *s = (deflate_state *) strm->state;
- unsigned len = s->pending;
-
- if (len > strm->avail_out) len = strm->avail_out;
- if (len == 0) return;
-
- if (strm->next_out != NULL) {
- memcpy(strm->next_out, s->pending_out, len);
- strm->next_out += len;
- }
- s->pending_out += len;
- strm->total_out += len;
- strm->avail_out -= len;
- s->pending -= len;
- if (s->pending == 0) {
- s->pending_out = s->pending_buf;
- }
-}
-
/* ========================================================================= */
int zlib_deflate(
z_streamp strm,
@@ -404,7 +405,8 @@ int zlib_deflate(
(flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
block_state bstate;
- bstate = (*(configuration_table[s->level].func))(s, flush);
+ bstate = DEFLATE_HOOK(strm, flush, &bstate) ? bstate :
+ (*(configuration_table[s->level].func))(s, flush);
if (bstate == finish_started || bstate == finish_done) {
s->status = FINISH_STATE;
@@ -503,7 +505,8 @@ static int read_buf(
strm->avail_in -= len;
- if (!((deflate_state *)(strm->state))->noheader) {
+ if (!DEFLATE_NEED_CHECKSUM(strm)) {}
+ else if (!((deflate_state *)(strm->state))->noheader) {
strm->adler = zlib_adler32(strm->adler, strm->next_in, len);
}
memcpy(buf, strm->next_in, len);
--- a/lib/zlib_deflate/deftree.c~lib-zlib-add-s390-hardware-support-for-kernel-zlib_deflate
+++ a/lib/zlib_deflate/deftree.c
@@ -76,11 +76,6 @@ static const uch bl_order[BL_CODES]
* probability, to avoid transmitting the lengths for unused bit length codes.
*/
-#define Buf_size (8 * 2*sizeof(char))
-/* Number of bits used within bi_buf. (bi_buf might be implemented on
- * more than 16 bits on some systems.)
- */
-
/* ===========================================================================
* Local data. These are initialized only once.
*/
@@ -147,7 +142,6 @@ static void send_all_trees (deflate_stat
static void compress_block (deflate_state *s, ct_data *ltree,
ct_data *dtree);
static void set_data_type (deflate_state *s);
-static void bi_windup (deflate_state *s);
static void bi_flush (deflate_state *s);
static void copy_block (deflate_state *s, char *buf, unsigned len,
int header);
@@ -170,54 +164,6 @@ static void copy_block (deflate_stat
*/
/* ===========================================================================
- * Send a value on a given number of bits.
- * IN assertion: length <= 16 and value fits in length bits.
- */
-#ifdef DEBUG_ZLIB
-static void send_bits (deflate_state *s, int value, int length);
-
-static void send_bits(
- deflate_state *s,
- int value, /* value to send */
- int length /* number of bits */
-)
-{
- Tracevv((stderr," l %2d v %4x ", length, value));
- Assert(length > 0 && length <= 15, "invalid length");
- s->bits_sent += (ulg)length;
-
- /* If not enough room in bi_buf, use (valid) bits from bi_buf and
- * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
- * unused bits in value.
- */
- if (s->bi_valid > (int)Buf_size - length) {
- s->bi_buf |= (value << s->bi_valid);
- put_short(s, s->bi_buf);
- s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
- s->bi_valid += length - Buf_size;
- } else {
- s->bi_buf |= value << s->bi_valid;
- s->bi_valid += length;
- }
-}
-#else /* !DEBUG_ZLIB */
-
-#define send_bits(s, value, length) \
-{ int len = length;\
- if (s->bi_valid > (int)Buf_size - len) {\
- int val = value;\
- s->bi_buf |= (val << s->bi_valid);\
- put_short(s, s->bi_buf);\
- s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
- s->bi_valid += len - Buf_size;\
- } else {\
- s->bi_buf |= (value) << s->bi_valid;\
- s->bi_valid += len;\
- }\
-}
-#endif /* DEBUG_ZLIB */
-
-/* ===========================================================================
* Initialize the various 'constant' tables. In a multi-threaded environment,
* this function may be called by two threads concurrently, but this is
* harmless since both invocations do exactly the same thing.
--- a/lib/zlib_deflate/defutil.h~lib-zlib-add-s390-hardware-support-for-kernel-zlib_deflate
+++ a/lib/zlib_deflate/defutil.h
@@ -1,5 +1,7 @@
+#ifndef DEFUTIL_H
+#define DEFUTIL_H
-
+#include <linux/zutil.h>
#define Assert(err, str)
#define Trace(dummy)
@@ -238,17 +240,13 @@ typedef struct deflate_state {
} deflate_state;
-typedef struct deflate_workspace {
- /* State memory for the deflator */
- deflate_state deflate_memory;
- Byte *window_memory;
- Pos *prev_memory;
- Pos *head_memory;
- char *overlay_memory;
-} deflate_workspace;
-
+#ifdef CONFIG_ZLIB_DFLTCC_DEFLATE
+#define zlib_deflate_window_memsize(windowBits) \
+ (2 * (1 << (windowBits)) * sizeof(Byte) + PAGE_SIZE)
+#else
#define zlib_deflate_window_memsize(windowBits) \
(2 * (1 << (windowBits)) * sizeof(Byte))
+#endif
#define zlib_deflate_prev_memsize(windowBits) \
((1 << (windowBits)) * sizeof(Pos))
#define zlib_deflate_head_memsize(memLevel) \
@@ -293,6 +291,24 @@ void zlib_tr_stored_type_only (deflate_s
}
/* ===========================================================================
+ * Reverse the first len bits of a code, using straightforward code (a faster
+ * method would use a table)
+ * IN assertion: 1 <= len <= 15
+ */
+static inline unsigned bi_reverse(
+ unsigned code, /* the value to invert */
+ int len /* its bit length */
+)
+{
+ register unsigned res = 0;
+ do {
+ res |= code & 1;
+ code >>= 1, res <<= 1;
+ } while (--len > 0);
+ return res >> 1;
+}
+
+/* ===========================================================================
* Flush the bit buffer, keeping at most 7 bits in it.
*/
static inline void bi_flush(deflate_state *s)
@@ -325,3 +341,101 @@ static inline void bi_windup(deflate_sta
#endif
}
+typedef enum {
+ need_more, /* block not completed, need more input or more output */
+ block_done, /* block flush performed */
+ finish_started, /* finish started, need only more output at next deflate */
+ finish_done /* finish done, accept no more input or output */
+} block_state;
+
+#define Buf_size (8 * 2*sizeof(char))
+/* Number of bits used within bi_buf. (bi_buf might be implemented on
+ * more than 16 bits on some systems.)
+ */
+
+/* ===========================================================================
+ * Send a value on a given number of bits.
+ * IN assertion: length <= 16 and value fits in length bits.
+ */
+#ifdef DEBUG_ZLIB
+static void send_bits (deflate_state *s, int value, int length);
+
+static void send_bits(
+ deflate_state *s,
+ int value, /* value to send */
+ int length /* number of bits */
+)
+{
+ Tracevv((stderr," l %2d v %4x ", length, value));
+ Assert(length > 0 && length <= 15, "invalid length");
+ s->bits_sent += (ulg)length;
+
+ /* If not enough room in bi_buf, use (valid) bits from bi_buf and
+ * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
+ * unused bits in value.
+ */
+ if (s->bi_valid > (int)Buf_size - length) {
+ s->bi_buf |= (value << s->bi_valid);
+ put_short(s, s->bi_buf);
+ s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
+ s->bi_valid += length - Buf_size;
+ } else {
+ s->bi_buf |= value << s->bi_valid;
+ s->bi_valid += length;
+ }
+}
+#else /* !DEBUG_ZLIB */
+
+#define send_bits(s, value, length) \
+{ int len = length;\
+ if (s->bi_valid > (int)Buf_size - len) {\
+ int val = value;\
+ s->bi_buf |= (val << s->bi_valid);\
+ put_short(s, s->bi_buf);\
+ s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
+ s->bi_valid += len - Buf_size;\
+ } else {\
+ s->bi_buf |= (value) << s->bi_valid;\
+ s->bi_valid += len;\
+ }\
+}
+#endif /* DEBUG_ZLIB */
+
+static inline void zlib_tr_send_bits(
+ deflate_state *s,
+ int value,
+ int length
+)
+{
+ send_bits(s, value, length);
+}
+
+/* =========================================================================
+ * Flush as much pending output as possible. All deflate() output goes
+ * through this function so some applications may wish to modify it
+ * to avoid allocating a large strm->next_out buffer and copying into it.
+ * (See also read_buf()).
+ */
+static inline void flush_pending(
+ z_streamp strm
+)
+{
+ deflate_state *s = (deflate_state *) strm->state;
+ unsigned len = s->pending;
+
+ if (len > strm->avail_out) len = strm->avail_out;
+ if (len == 0) return;
+
+ if (strm->next_out != NULL) {
+ memcpy(strm->next_out, s->pending_out, len);
+ strm->next_out += len;
+ }
+ s->pending_out += len;
+ strm->total_out += len;
+ strm->avail_out -= len;
+ s->pending -= len;
+ if (s->pending == 0) {
+ s->pending_out = s->pending_buf;
+ }
+}
+#endif /* DEFUTIL_H */
--- /dev/null
+++ a/lib/zlib_dfltcc/dfltcc.c
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: Zlib
+/* dfltcc.c - SystemZ DEFLATE CONVERSION CALL support. */
+
+#include <linux/zutil.h>
+#include "dfltcc_util.h"
+#include "dfltcc.h"
+
+char *oesc_msg(
+ char *buf,
+ int oesc
+)
+{
+ if (oesc == 0x00)
+ return NULL; /* Successful completion */
+ else {
+#ifdef STATIC
+ return NULL; /* Ignore for pre-boot decompressor */
+#else
+ sprintf(buf, "Operation-Ending-Supplemental Code is 0x%.2X", oesc);
+ return buf;
+#endif
+ }
+}
+
+void dfltcc_reset(
+ z_streamp strm,
+ uInt size
+)
+{
+ struct dfltcc_state *dfltcc_state =
+ (struct dfltcc_state *)((char *)strm->state + size);
+ struct dfltcc_qaf_param *param =
+ (struct dfltcc_qaf_param *)&dfltcc_state->param;
+
+ /* Initialize available functions */
+ if (is_dfltcc_enabled()) {
+ dfltcc(DFLTCC_QAF, param, NULL, NULL, NULL, NULL, NULL);
+ memmove(&dfltcc_state->af, param, sizeof(dfltcc_state->af));
+ } else
+ memset(&dfltcc_state->af, 0, sizeof(dfltcc_state->af));
+
+ /* Initialize parameter block */
+ memset(&dfltcc_state->param, 0, sizeof(dfltcc_state->param));
+ dfltcc_state->param.nt = 1;
+
+ /* Initialize tuning parameters */
+ dfltcc_state->level_mask = DFLTCC_LEVEL_MASK;
+ dfltcc_state->block_size = DFLTCC_BLOCK_SIZE;
+ dfltcc_state->block_threshold = DFLTCC_FIRST_FHT_BLOCK_SIZE;
+ dfltcc_state->dht_threshold = DFLTCC_DHT_MIN_SAMPLE_SIZE;
+ dfltcc_state->param.ribm = DFLTCC_RIBM;
+}
--- /dev/null
+++ a/lib/zlib_dfltcc/dfltcc_deflate.c
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: Zlib
+
+#include "../zlib_deflate/defutil.h"
+#include "dfltcc_util.h"
+#include "dfltcc.h"
+#include <linux/zutil.h>
+
+/*
+ * Compress.
+ */
+int dfltcc_can_deflate(
+ z_streamp strm
+)
+{
+ deflate_state *state = (deflate_state *)strm->state;
+ struct dfltcc_state *dfltcc_state = GET_DFLTCC_STATE(state);
+
+ /* Unsupported compression settings */
+ if (!dfltcc_are_params_ok(state->level, state->w_bits, state->strategy,
+ dfltcc_state->level_mask))
+ return 0;
+
+ /* Unsupported hardware */
+ if (!is_bit_set(dfltcc_state->af.fns, DFLTCC_GDHT) ||
+ !is_bit_set(dfltcc_state->af.fns, DFLTCC_CMPR) ||
+ !is_bit_set(dfltcc_state->af.fmts, DFLTCC_FMT0))
+ return 0;
+
+ return 1;
+}
+
+static void dfltcc_gdht(
+ z_streamp strm
+)
+{
+ deflate_state *state = (deflate_state *)strm->state;
+ struct dfltcc_param_v0 *param = &GET_DFLTCC_STATE(state)->param;
+ size_t avail_in = avail_in = strm->avail_in;
+
+ dfltcc(DFLTCC_GDHT,
+ param, NULL, NULL,
+ &strm->next_in, &avail_in, NULL);
+}
+
+static dfltcc_cc dfltcc_cmpr(
+ z_streamp strm
+)
+{
+ deflate_state *state = (deflate_state *)strm->state;
+ struct dfltcc_param_v0 *param = &GET_DFLTCC_STATE(state)->param;
+ size_t avail_in = strm->avail_in;
+ size_t avail_out = strm->avail_out;
+ dfltcc_cc cc;
+
+ cc = dfltcc(DFLTCC_CMPR | HBT_CIRCULAR,
+ param, &strm->next_out, &avail_out,
+ &strm->next_in, &avail_in, state->window);
+ strm->total_in += (strm->avail_in - avail_in);
+ strm->total_out += (strm->avail_out - avail_out);
+ strm->avail_in = avail_in;
+ strm->avail_out = avail_out;
+ return cc;
+}
+
+static void send_eobs(
+ z_streamp strm,
+ const struct dfltcc_param_v0 *param
+)
+{
+ deflate_state *state = (deflate_state *)strm->state;
+
+ zlib_tr_send_bits(
+ state,
+ bi_reverse(param->eobs >> (15 - param->eobl), param->eobl),
+ param->eobl);
+ flush_pending(strm);
+ if (state->pending != 0) {
+ /* The remaining data is located in pending_out[0:pending]. If someone
+ * calls put_byte() - this might happen in deflate() - the byte will be
+ * placed into pending_buf[pending], which is incorrect. Move the
+ * remaining data to the beginning of pending_buf so that put_byte() is
+ * usable again.
+ */
+ memmove(state->pending_buf, state->pending_out, state->pending);
+ state->pending_out = state->pending_buf;
+ }
+#ifdef ZLIB_DEBUG
+ state->compressed_len += param->eobl;
+#endif
+}
+
+int dfltcc_deflate(
+ z_streamp strm,
+ int flush,
+ block_state *result
+)
+{
+ deflate_state *state = (deflate_state *)strm->state;
+ struct dfltcc_state *dfltcc_state = GET_DFLTCC_STATE(state);
+ struct dfltcc_param_v0 *param = &dfltcc_state->param;
+ uInt masked_avail_in;
+ dfltcc_cc cc;
+ int need_empty_block;
+ int soft_bcc;
+ int no_flush;
+
+ if (!dfltcc_can_deflate(strm))
+ return 0;
+
+again:
+ masked_avail_in = 0;
+ soft_bcc = 0;
+ no_flush = flush == Z_NO_FLUSH;
+
+ /* Trailing empty block. Switch to software, except when Continuation Flag
+ * is set, which means that DFLTCC has buffered some output in the
+ * parameter block and needs to be called again in order to flush it.
+ */
+ if (flush == Z_FINISH && strm->avail_in == 0 && !param->cf) {
+ if (param->bcf) {
+ /* A block is still open, and the hardware does not support closing
+ * blocks without adding data. Thus, close it manually.
+ */
+ send_eobs(strm, param);
+ param->bcf = 0;
+ }
+ return 0;
+ }
+
+ if (strm->avail_in == 0 && !param->cf) {
+ *result = need_more;
+ return 1;
+ }
+
+ /* There is an open non-BFINAL block, we are not going to close it just
+ * yet, we have compressed more than DFLTCC_BLOCK_SIZE bytes and we see
+ * more than DFLTCC_DHT_MIN_SAMPLE_SIZE bytes. Open a new block with a new
+ * DHT in order to adapt to a possibly changed input data distribution.
+ */
+ if (param->bcf && no_flush &&
+ strm->total_in > dfltcc_state->block_threshold &&
+ strm->avail_in >= dfltcc_state->dht_threshold) {
+ if (param->cf) {
+ /* We need to flush the DFLTCC buffer before writing the
+ * End-of-block Symbol. Mask the input data and proceed as usual.
+ */
+ masked_avail_in += strm->avail_in;
+ strm->avail_in = 0;
+ no_flush = 0;
+ } else {
+ /* DFLTCC buffer is empty, so we can manually write the
+ * End-of-block Symbol right away.
+ */
+ send_eobs(strm, param);
+ param->bcf = 0;
+ dfltcc_state->block_threshold =
+ strm->total_in + dfltcc_state->block_size;
+ if (strm->avail_out == 0) {
+ *result = need_more;
+ return 1;
+ }
+ }
+ }
+
+ /* The caller gave us too much data. Pass only one block worth of
+ * uncompressed data to DFLTCC and mask the rest, so that on the next
+ * iteration we start a new block.
+ */
+ if (no_flush && strm->avail_in > dfltcc_state->block_size) {
+ masked_avail_in += (strm->avail_in - dfltcc_state->block_size);
+ strm->avail_in = dfltcc_state->block_size;
+ }
+
+ /* When we have an open non-BFINAL deflate block and caller indicates that
+ * the stream is ending, we need to close an open deflate block and open a
+ * BFINAL one.
+ */
+ need_empty_block = flush == Z_FINISH && param->bcf && !param->bhf;
+
+ /* Translate stream to parameter block */
+ param->cvt = CVT_ADLER32;
+ if (!no_flush)
+ /* We need to close a block. Always do this in software - when there is
+ * no input data, the hardware will not nohor BCC. */
+ soft_bcc = 1;
+ if (flush == Z_FINISH && !param->bcf)
+ /* We are about to open a BFINAL block, set Block Header Final bit
+ * until the stream ends.
+ */
+ param->bhf = 1;
+ /* DFLTCC-CMPR will write to next_out, so make sure that buffers with
+ * higher precedence are empty.
+ */
+ Assert(state->pending == 0, "There must be no pending bytes");
+ Assert(state->bi_valid < 8, "There must be less than 8 pending bits");
+ param->sbb = (unsigned int)state->bi_valid;
+ if (param->sbb > 0)
+ *strm->next_out = (Byte)state->bi_buf;
+ if (param->hl)
+ param->nt = 0; /* Honor history */
+ param->cv = strm->adler;
+
+ /* When opening a block, choose a Huffman-Table Type */
+ if (!param->bcf) {
+ if (strm->total_in == 0 && dfltcc_state->block_threshold > 0) {
+ param->htt = HTT_FIXED;
+ }
+ else {
+ param->htt = HTT_DYNAMIC;
+ dfltcc_gdht(strm);
+ }
+ }
+
+ /* Deflate */
+ do {
+ cc = dfltcc_cmpr(strm);
+ if (strm->avail_in < 4096 && masked_avail_in > 0)
+ /* We are about to call DFLTCC with a small input buffer, which is
+ * inefficient. Since there is masked data, there will be at least
+ * one more DFLTCC call, so skip the current one and make the next
+ * one handle more data.
+ */
+ break;
+ } while (cc == DFLTCC_CC_AGAIN);
+
+ /* Translate parameter block to stream */
+ strm->msg = oesc_msg(dfltcc_state->msg, param->oesc);
+ state->bi_valid = param->sbb;
+ if (state->bi_valid == 0)
+ state->bi_buf = 0; /* Avoid accessing next_out */
+ else
+ state->bi_buf = *strm->next_out & ((1 << state->bi_valid) - 1);
+ strm->adler = param->cv;
+
+ /* Unmask the input data */
+ strm->avail_in += masked_avail_in;
+ masked_avail_in = 0;
+
+ /* If we encounter an error, it means there is a bug in DFLTCC call */
+ Assert(cc != DFLTCC_CC_OP2_CORRUPT || param->oesc == 0, "BUG");
+
+ /* Update Block-Continuation Flag. It will be used to check whether to call
+ * GDHT the next time.
+ */
+ if (cc == DFLTCC_CC_OK) {
+ if (soft_bcc) {
+ send_eobs(strm, param);
+ param->bcf = 0;
+ dfltcc_state->block_threshold =
+ strm->total_in + dfltcc_state->block_size;
+ } else
+ param->bcf = 1;
+ if (flush == Z_FINISH) {
+ if (need_empty_block)
+ /* Make the current deflate() call also close the stream */
+ return 0;
+ else {
+ bi_windup(state);
+ *result = finish_done;
+ }
+ } else {
+ if (flush == Z_FULL_FLUSH)
+ param->hl = 0; /* Clear history */
+ *result = flush == Z_NO_FLUSH ? need_more : block_done;
+ }
+ } else {
+ param->bcf = 1;
+ *result = need_more;
+ }
+ if (strm->avail_in != 0 && strm->avail_out != 0)
+ goto again; /* deflate() must use all input or all output */
+ return 1;
+}
+
--- /dev/null
+++ a/lib/zlib_dfltcc/dfltcc.h
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: Zlib
+#ifndef DFLTCC_H
+#define DFLTCC_H
+
+#include "../zlib_deflate/defutil.h"
+
+/*
+ * Tuning parameters.
+ */
+#define DFLTCC_LEVEL_MASK 0x2 /* DFLTCC compression for level 1 only */
+#define DFLTCC_BLOCK_SIZE 1048576
+#define DFLTCC_FIRST_FHT_BLOCK_SIZE 4096
+#define DFLTCC_DHT_MIN_SAMPLE_SIZE 4096
+#define DFLTCC_RIBM 0
+
+/*
+ * Parameter Block for Query Available Functions.
+ */
+struct dfltcc_qaf_param {
+ char fns[16];
+ char reserved1[8];
+ char fmts[2];
+ char reserved2[6];
+};
+
+static_assert(sizeof(struct dfltcc_qaf_param) == 32);
+
+#define DFLTCC_FMT0 0
+
+/*
+ * Parameter Block for Generate Dynamic-Huffman Table, Compress and Expand.
+ */
+struct dfltcc_param_v0 {
+ uint16_t pbvn; /* Parameter-Block-Version Number */
+ uint8_t mvn; /* Model-Version Number */
+ uint8_t ribm; /* Reserved for IBM use */
+ unsigned reserved32 : 31;
+ unsigned cf : 1; /* Continuation Flag */
+ uint8_t reserved64[8];
+ unsigned nt : 1; /* New Task */
+ unsigned reserved129 : 1;
+ unsigned cvt : 1; /* Check Value Type */
+ unsigned reserved131 : 1;
+ unsigned htt : 1; /* Huffman-Table Type */
+ unsigned bcf : 1; /* Block-Continuation Flag */
+ unsigned bcc : 1; /* Block Closing Control */
+ unsigned bhf : 1; /* Block Header Final */
+ unsigned reserved136 : 1;
+ unsigned reserved137 : 1;
+ unsigned dhtgc : 1; /* DHT Generation Control */
+ unsigned reserved139 : 5;
+ unsigned reserved144 : 5;
+ unsigned sbb : 3; /* Sub-Byte Boundary */
+ uint8_t oesc; /* Operation-Ending-Supplemental Code */
+ unsigned reserved160 : 12;
+ unsigned ifs : 4; /* Incomplete-Function Status */
+ uint16_t ifl; /* Incomplete-Function Length */
+ uint8_t reserved192[8];
+ uint8_t reserved256[8];
+ uint8_t reserved320[4];
+ uint16_t hl; /* History Length */
+ unsigned reserved368 : 1;
+ uint16_t ho : 15; /* History Offset */
+ uint32_t cv; /* Check Value */
+ unsigned eobs : 15; /* End-of-block Symbol */
+ unsigned reserved431: 1;
+ uint8_t eobl : 4; /* End-of-block Length */
+ unsigned reserved436 : 12;
+ unsigned reserved448 : 4;
+ uint16_t cdhtl : 12; /* Compressed-Dynamic-Huffman Table
+ Length */
+ uint8_t reserved464[6];
+ uint8_t cdht[288];
+ uint8_t reserved[32];
+ uint8_t csb[1152];
+};
+
+static_assert(sizeof(struct dfltcc_param_v0) == 1536);
+
+#define CVT_CRC32 0
+#define CVT_ADLER32 1
+#define HTT_FIXED 0
+#define HTT_DYNAMIC 1
+
+/*
+ * Extension of inflate_state and deflate_state for DFLTCC.
+ */
+struct dfltcc_state {
+ struct dfltcc_param_v0 param; /* Parameter block */
+ struct dfltcc_qaf_param af; /* Available functions */
+ uLong level_mask; /* Levels on which to use DFLTCC */
+ uLong block_size; /* New block each X bytes */
+ uLong block_threshold; /* New block after total_in > X */
+ uLong dht_threshold; /* New block only if avail_in >= X */
+ char msg[64]; /* Buffer for strm->msg */
+};
+
+/* Resides right after inflate_state or deflate_state */
+#define GET_DFLTCC_STATE(state) ((struct dfltcc_state *)((state) + 1))
+
+/* External functions */
+int dfltcc_can_deflate(z_streamp strm);
+int dfltcc_deflate(z_streamp strm,
+ int flush,
+ block_state *result);
+void dfltcc_reset(z_streamp strm, uInt size);
+
+#define DEFLATE_RESET_HOOK(strm) \
+ dfltcc_reset((strm), sizeof(deflate_state))
+
+#define DEFLATE_HOOK dfltcc_deflate
+
+#define DEFLATE_NEED_CHECKSUM(strm) (!dfltcc_can_deflate((strm)))
+
+#endif /* DFLTCC_H */
--- /dev/null
+++ a/lib/zlib_dfltcc/dfltcc_syms.c
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/lib/zlib_dfltcc/dfltcc_syms.c
+ *
+ * Exported symbols for the s390 zlib dfltcc support.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/zlib.h>
+#include "dfltcc.h"
+
+EXPORT_SYMBOL(dfltcc_can_deflate);
+EXPORT_SYMBOL(dfltcc_deflate);
+EXPORT_SYMBOL(dfltcc_reset);
+MODULE_LICENSE("GPL");
--- /dev/null
+++ a/lib/zlib_dfltcc/dfltcc_util.h
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: Zlib
+#ifndef DFLTCC_UTIL_H
+#define DFLTCC_UTIL_H
+
+#include <linux/zutil.h>
+
+/*
+ * C wrapper for the DEFLATE CONVERSION CALL instruction.
+ */
+typedef enum {
+ DFLTCC_CC_OK = 0,
+ DFLTCC_CC_OP1_TOO_SHORT = 1,
+ DFLTCC_CC_OP2_TOO_SHORT = 2,
+ DFLTCC_CC_OP2_CORRUPT = 2,
+ DFLTCC_CC_AGAIN = 3,
+} dfltcc_cc;
+
+#define DFLTCC_QAF 0
+#define DFLTCC_GDHT 1
+#define DFLTCC_CMPR 2
+#define DFLTCC_XPND 4
+#define HBT_CIRCULAR (1 << 7)
+#define HB_BITS 15
+#define HB_SIZE (1 << HB_BITS)
+#define DFLTCC_FACILITY 151
+
+static inline dfltcc_cc dfltcc(
+ int fn,
+ void *param,
+ Byte **op1,
+ size_t *len1,
+ const Byte **op2,
+ size_t *len2,
+ void *hist
+)
+{
+ Byte *t2 = op1 ? *op1 : NULL;
+ size_t t3 = len1 ? *len1 : 0;
+ const Byte *t4 = op2 ? *op2 : NULL;
+ size_t t5 = len2 ? *len2 : 0;
+ register int r0 __asm__("r0") = fn;
+ register void *r1 __asm__("r1") = param;
+ register Byte *r2 __asm__("r2") = t2;
+ register size_t r3 __asm__("r3") = t3;
+ register const Byte *r4 __asm__("r4") = t4;
+ register size_t r5 __asm__("r5") = t5;
+ int cc;
+
+ __asm__ volatile(
+ ".insn rrf,0xb9390000,%[r2],%[r4],%[hist],0\n"
+ "ipm %[cc]\n"
+ : [r2] "+r" (r2)
+ , [r3] "+r" (r3)
+ , [r4] "+r" (r4)
+ , [r5] "+r" (r5)
+ , [cc] "=r" (cc)
+ : [r0] "r" (r0)
+ , [r1] "r" (r1)
+ , [hist] "r" (hist)
+ : "cc", "memory");
+ t2 = r2; t3 = r3; t4 = r4; t5 = r5;
+
+ if (op1)
+ *op1 = t2;
+ if (len1)
+ *len1 = t3;
+ if (op2)
+ *op2 = t4;
+ if (len2)
+ *len2 = t5;
+ return (cc >> 28) & 3;
+}
+
+static inline int is_bit_set(
+ const char *bits,
+ int n
+)
+{
+ return bits[n / 8] & (1 << (7 - (n % 8)));
+}
+
+static inline void turn_bit_off(
+ char *bits,
+ int n
+)
+{
+ bits[n / 8] &= ~(1 << (7 - (n % 8)));
+}
+
+static inline int dfltcc_are_params_ok(
+ int level,
+ uInt window_bits,
+ int strategy,
+ uLong level_mask
+)
+{
+ return (level_mask & (1 << level)) != 0 &&
+ (window_bits == HB_BITS) &&
+ (strategy == Z_DEFAULT_STRATEGY);
+}
+
+static inline int is_dfltcc_enabled(void)
+{
+ uint64_t facilities[(DFLTCC_FACILITY / 64) + 1];
+ register char r0 __asm__("r0");
+
+ memset(facilities, 0, sizeof(facilities));
+ r0 = sizeof(facilities) / sizeof(facilities[0]) - 1;
+ __asm__ volatile("stfle %[facilities]\n"
+ : [facilities] "=Q" (facilities)
+ , [r0] "+r" (r0)
+ :
+ : "cc");
+ return is_bit_set((const char *)facilities, DFLTCC_FACILITY);
+}
+
+char *oesc_msg(char *buf, int oesc);
+
+#endif /* DFLTCC_UTIL_H */
--- /dev/null
+++ a/lib/zlib_dfltcc/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# This is a modified version of zlib, which does all memory
+# allocation ahead of time.
+#
+# This is the code for s390 zlib hardware support.
+#
+
+obj-$(CONFIG_ZLIB_DFLTCC) += zlib_dfltcc.o
+
+zlib_dfltcc-objs := dfltcc.o dfltcc_deflate.o dfltcc_syms.o
_
Patches currently in -mm which might be from zaslonko@xxxxxxxxxxxxx are
s390-boot-rename-heap_size-due-to-name-collision.patch
lib-zlib-add-s390-hardware-support-for-kernel-zlib_inflate.patch
s390-boot-add-dfltcc=-kernel-command-line-parameter.patch
lib-zlib-add-zlib_deflate_dfltcc_enabled-function.patch
btrfs-use-larger-zlib-buffer-for-s390-hardware-compression.patch
