From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx> Subject: gpio: uniphier: utilize for_each_set_clump8 macro Replace verbose implementation in set_multiple callback with for_each_set_clump8 macro to simplify code and improve clarity. An improvement in this case is that banks that are not masked will now be skipped. Link: http://lkml.kernel.org/r/5b24887e97f3093e4832d7c50a1093f537e91ab4.1570641097.git.vilhelm.gray@xxxxxxxxx Signed-off-by: William Breathitt Gray <vilhelm.gray@xxxxxxxxx> Cc: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> Cc: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx> Cc: Arnd Bergmann <arnd@xxxxxxxx> Cc: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> Cc: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx> Cc: Lukas Wunner <lukas@xxxxxxxxx> Cc: Mathias Duckeck <m.duckeck@xxxxxxxxx> Cc: Morten Hein Tiljeset <morten.tiljeset@xxxxxxxxx> Cc: Phil Reid <preid@xxxxxxxxxxxxxxxxx> Cc: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx> Cc: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/gpio/gpio-uniphier.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) --- a/drivers/gpio/gpio-uniphier.c~gpio-uniphier-utilize-for_each_set_clump8-macro +++ a/drivers/gpio/gpio-uniphier.c @@ -15,9 +15,6 @@ #include <linux/spinlock.h> #include <dt-bindings/gpio/uniphier-gpio.h> -#define UNIPHIER_GPIO_BANK_MASK \ - GENMASK((UNIPHIER_GPIO_LINES_PER_BANK) - 1, 0) - #define UNIPHIER_GPIO_IRQ_MAX_NUM 24 #define UNIPHIER_GPIO_PORT_DATA 0x0 /* data */ @@ -150,15 +147,11 @@ static void uniphier_gpio_set(struct gpi static void uniphier_gpio_set_multiple(struct gpio_chip *chip, unsigned long *mask, unsigned long *bits) { - unsigned int bank, shift, bank_mask, bank_bits; - int i; + unsigned long i, bank, bank_mask, bank_bits; - for (i = 0; i < chip->ngpio; i += UNIPHIER_GPIO_LINES_PER_BANK) { + for_each_set_clump8(i, bank_mask, mask, chip->ngpio) { bank = i / UNIPHIER_GPIO_LINES_PER_BANK; - shift = i % BITS_PER_LONG; - bank_mask = (mask[BIT_WORD(i)] >> shift) & - UNIPHIER_GPIO_BANK_MASK; - bank_bits = bits[BIT_WORD(i)] >> shift; + bank_bits = bitmap_get_value8(bits, i); uniphier_gpio_bank_write(chip, bank, UNIPHIER_GPIO_PORT_DATA, bank_mask, bank_bits); _
