The patch titled
MMC: When rescanning cards check existing cards after mmc_setup()
has been removed from the -mm tree. Its filename was
mmc-when-rescanning-cards-check-existing-cards-after-mmc_setup.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: MMC: When rescanning cards check existing cards after mmc_setup()
From: Timo Teras <timo.teras@xxxxxxxxxxxxx>
Some broken cards seem to process CMD1 even in stand-by state. The result
is that the card replies with ILLEGAL_COMMAND error for the next command
sent after rescanning. Currently the next command is select card, which
would return the error. But the CMD7 does actually succeed and retries of
the command will timeout. The solution is to poll card status after the
CMD1 which clears the cached error.
Signed-off-by: Timo Teras <timo.teras@xxxxxxxxxxxxx>
Cc: Pierre Ossman <drzeus-list@xxxxxxxxx>
Cc: Russell King <rmk@xxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
drivers/mmc/mmc.c | 7 +++++--
1 files changed, 5 insertions(+), 2 deletions(-)
diff -puN drivers/mmc/mmc.c~mmc-when-rescanning-cards-check-existing-cards-after-mmc_setup drivers/mmc/mmc.c
--- a/drivers/mmc/mmc.c~mmc-when-rescanning-cards-check-existing-cards-after-mmc_setup
+++ a/drivers/mmc/mmc.c
@@ -1178,14 +1178,17 @@ static void mmc_rescan(void *data)
{
struct mmc_host *host = data;
struct list_head *l, *n;
+ unsigned char power_mode;
mmc_claim_host(host);
- if (host->ios.power_mode == MMC_POWER_ON)
- mmc_check_cards(host);
+ power_mode = host->ios.power_mode;
mmc_setup(host);
+ if (power_mode == MMC_POWER_ON)
+ mmc_check_cards(host);
+
if (!list_empty(&host->cards)) {
/*
* (Re-)calculate the fastest clock rate which the
_
Patches currently in -mm which might be from timo.teras@xxxxxxxxxxxxx are
git-mmc.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
