The patch titled
Kconfig refactoring for better menu nesting
has been added to the -mm tree. Its filename is
kconfig-refactoring-for-better-menu-nesting.patch
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: Kconfig refactoring for better menu nesting
From: Don Mullis <dwm@xxxxxxxx>
Refactor Kconfig content to maximize nesting of menus by menuconfig and
xconfig.
Tested by simultaneously running `make xconfig` with and without
patch, and comparing displays.
Signed-off-by: Don Mullis <dwm@xxxxxxxx>
Signed-off-by: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
Cc: Sam Ravnborg <sam@xxxxxxxxxxxx>
Cc: Roman Zippel <zippel@xxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
drivers/parport/Kconfig | 6 +-
drivers/pci/hotplug/Kconfig | 3 -
drivers/serial/Kconfig | 53 ++++++++++-----------
lib/Kconfig.debug | 85 +++++++++++++++++-----------------
4 files changed, 74 insertions(+), 73 deletions(-)
diff -puN drivers/parport/Kconfig~kconfig-refactoring-for-better-menu-nesting drivers/parport/Kconfig
--- a/drivers/parport/Kconfig~kconfig-refactoring-for-better-menu-nesting
+++ a/drivers/parport/Kconfig
@@ -82,9 +82,6 @@ config PARPORT_PC_PCMCIA
Say Y here if you need PCMCIA support for your PC-style parallel
ports. If unsure, say N.
-config PARPORT_NOT_PC
- bool
-
config PARPORT_IP32
tristate "SGI IP32 builtin port (EXPERIMENTAL)"
depends on SGI_IP32 && PARPORT && EXPERIMENTAL
@@ -158,5 +155,8 @@ config PARPORT_1284
transfer modes. Also say Y if you want device ID information to
appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N.
+config PARPORT_NOT_PC
+ bool
+
endmenu
diff -puN drivers/pci/hotplug/Kconfig~kconfig-refactoring-for-better-menu-nesting drivers/pci/hotplug/Kconfig
--- a/drivers/pci/hotplug/Kconfig~kconfig-refactoring-for-better-menu-nesting
+++ a/drivers/pci/hotplug/Kconfig
@@ -76,7 +76,8 @@ config HOTPLUG_PCI_IBM
config HOTPLUG_PCI_ACPI
tristate "ACPI PCI Hotplug driver"
- depends on (!ACPI_DOCK && ACPI && HOTPLUG_PCI) || (ACPI_DOCK && HOTPLUG_PCI)
+ depends on HOTPLUG_PCI
+ depends on (!ACPI_DOCK && ACPI) || (ACPI_DOCK)
help
Say Y here if you have a system that supports PCI Hotplug using
ACPI.
diff -puN drivers/serial/Kconfig~kconfig-refactoring-for-better-menu-nesting drivers/serial/Kconfig
--- a/drivers/serial/Kconfig~kconfig-refactoring-for-better-menu-nesting
+++ a/drivers/serial/Kconfig
@@ -151,32 +151,6 @@ config SERIAL_8250_MANY_PORTS
say N here to save some memory. You can also say Y if you have an
"intelligent" multiport card such as Cyclades, Digiboards, etc.
-config SERIAL_8250_SHARE_IRQ
- bool "Support for sharing serial interrupts"
- depends on SERIAL_8250_EXTENDED
- help
- Some serial boards have hardware support which allows multiple dumb
- serial ports on the same board to share a single IRQ. To enable
- support for this in the serial driver, say Y here.
-
-config SERIAL_8250_DETECT_IRQ
- bool "Autodetect IRQ on standard ports (unsafe)"
- depends on SERIAL_8250_EXTENDED
- help
- Say Y here if you want the kernel to try to guess which IRQ
- to use for your serial port.
-
- This is considered unsafe; it is far better to configure the IRQ in
- a boot script using the setserial command.
-
- If unsure, say N.
-
-config SERIAL_8250_RSA
- bool "Support RSA serial ports"
- depends on SERIAL_8250_EXTENDED
- help
- ::: To be written :::
-
#
# Multi-port serial cards
#
@@ -199,7 +173,6 @@ config SERIAL_8250_ACCENT
To compile this driver as a module, choose M here: the module
will be called 8250_accent.
-
config SERIAL_8250_BOCA
tristate "Support Boca cards"
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
@@ -219,6 +192,32 @@ config SERIAL_8250_HUB6
To compile this driver as a module, choose M here: the module
will be called 8250_hub6.
+config SERIAL_8250_SHARE_IRQ
+ bool "Support for sharing serial interrupts"
+ depends on SERIAL_8250_EXTENDED
+ help
+ Some serial boards have hardware support which allows multiple dumb
+ serial ports on the same board to share a single IRQ. To enable
+ support for this in the serial driver, say Y here.
+
+config SERIAL_8250_DETECT_IRQ
+ bool "Autodetect IRQ on standard ports (unsafe)"
+ depends on SERIAL_8250_EXTENDED
+ help
+ Say Y here if you want the kernel to try to guess which IRQ
+ to use for your serial port.
+
+ This is considered unsafe; it is far better to configure the IRQ in
+ a boot script using the setserial command.
+
+ If unsure, say N.
+
+config SERIAL_8250_RSA
+ bool "Support RSA serial ports"
+ depends on SERIAL_8250_EXTENDED
+ help
+ ::: To be written :::
+
config SERIAL_8250_MCA
tristate "Support 8250-type ports on MCA buses"
depends on SERIAL_8250 != n && MCA
diff -puN lib/Kconfig.debug~kconfig-refactoring-for-better-menu-nesting lib/Kconfig.debug
--- a/lib/Kconfig.debug~kconfig-refactoring-for-better-menu-nesting
+++ a/lib/Kconfig.debug
@@ -46,6 +46,48 @@ config UNUSED_SYMBOLS
you really need it, and what the merge plan to the mainline kernel for
your module is.
+config DEBUG_FS
+ bool "Debug Filesystem"
+ depends on SYSFS
+ help
+ debugfs is a virtual file system that kernel developers use to put
+ debugging files into. Enable this option to be able to read and
+ write to these files.
+
+ If unsure, say N.
+
+config UNWIND_INFO
+ bool "Compile the kernel with frame unwind information"
+ depends on !IA64 && !PARISC
+ depends on !MODULES || !(MIPS || PPC || SUPERH || V850)
+ help
+ If you say Y here the resulting kernel image will be slightly larger
+ but not slower, and it will give very useful debugging information.
+ If you don't debug the kernel, you can say N, but we may not be able
+ to solve problems without frame unwind information or frame pointers.
+
+config STACK_UNWIND
+ bool "Stack unwind support"
+ depends on UNWIND_INFO
+ depends on X86
+ help
+ This enables more precise stack traces, omitting all unrelated
+ occurrences of pointers into kernel code from the dump.
+
+config HEADERS_CHECK
+ bool "Run 'make headers_check' when building vmlinux"
+ depends on !UML
+ help
+ This option will extract the user-visible kernel headers whenever
+ building the kernel, and will run basic sanity checks on them to
+ ensure that exported files do not attempt to include files which
+ were not exported, etc.
+
+ If you're making modifications to header files which are
+ relevant for userspace, say 'Y', and check the headers
+ exported to $(INSTALL_HDR_PATH) (usually 'usr/include' in
+ your build tree), to make sure they're suitable.
+
config DEBUG_KERNEL
bool "Kernel debugging"
help
@@ -301,16 +343,6 @@ config DEBUG_INFO
If unsure, say N.
-config DEBUG_FS
- bool "Debug Filesystem"
- depends on SYSFS
- help
- debugfs is a virtual file system that kernel developers use to put
- debugging files into. Enable this option to be able to read and
- write to these files.
-
- If unsure, say N.
-
config DEBUG_VM
bool "Debug VM"
depends on DEBUG_KERNEL
@@ -339,24 +371,6 @@ config FRAME_POINTER
some architectures or if you use external debuggers.
If you don't debug the kernel, you can say N.
-config UNWIND_INFO
- bool "Compile the kernel with frame unwind information"
- depends on !IA64 && !PARISC
- depends on !MODULES || !(MIPS || PPC || SUPERH || V850)
- help
- If you say Y here the resulting kernel image will be slightly larger
- but not slower, and it will give very useful debugging information.
- If you don't debug the kernel, you can say N, but we may not be able
- to solve problems without frame unwind information or frame pointers.
-
-config STACK_UNWIND
- bool "Stack unwind support"
- depends on UNWIND_INFO
- depends on X86
- help
- This enables more precise stack traces, omitting all unrelated
- occurrences of pointers into kernel code from the dump.
-
config FORCED_INLINING
bool "Force gcc to inline functions marked 'inline'"
depends on DEBUG_KERNEL
@@ -371,20 +385,6 @@ config FORCED_INLINING
become the default in the future, until then this option is there to
test gcc for this.
-config HEADERS_CHECK
- bool "Run 'make headers_check' when building vmlinux"
- depends on !UML
- help
- This option will extract the user-visible kernel headers whenever
- building the kernel, and will run basic sanity checks on them to
- ensure that exported files do not attempt to include files which
- were not exported, etc.
-
- If you're making modifications to header files which are
- relevant for userspace, say 'Y', and check the headers
- exported to $(INSTALL_HDR_PATH) (usually 'usr/include' in
- your build tree), to make sure they're suitable.
-
config RCU_TORTURE_TEST
tristate "torture tests for RCU"
depends on DEBUG_KERNEL
@@ -401,6 +401,7 @@ config RCU_TORTURE_TEST
config LKDTM
tristate "Linux Kernel Dump Test Tool Module"
+ depends on DEBUG_KERNEL
depends on KPROBES
default n
help
_
Patches currently in -mm which might be from dwm@xxxxxxxx are
kconfig-refactoring-for-better-menu-nesting.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
