The patch titled
Subject: swap: choose swap device according to numa node
has been removed from the -mm tree. Its filename was
swap-choose-swap-device-according-to-numa-node.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
From: Aaron Lu <aaron.lu@xxxxxxxxx>
Subject: swap: choose swap device according to numa node
If the system has more than one swap device and swap device has the node
information, we can make use of this information to decide which swap
device to use in get_swap_pages() to get better performance.
The current code uses a priority based list, swap_avail_list, to decide
which swap device to use and if multiple swap devices share the same
priority, they are used round robin. This patch changes the previous
single global swap_avail_list into a per-numa-node list, i.e. for each
numa node, it sees its own priority based list of available swap devices.
Swap device's priority can be promoted on its matching node's
swap_avail_list.
The current swap device's priority is set as: user can set a >=0 value, or
the system will pick one starting from -1 then downwards. The priority
value in the swap_avail_list is the negated value of the swap device's due
to plist being sorted from low to high. The new policy doesn't change the
semantics for priority >=0 cases, the previous starting from -1 then
downwards now becomes starting from -2 then downwards and -1 is reserved
as the promoted value.
Take 4-node EX machine as an example, suppose 4 swap devices are
available, each sit on a different node:
swapA on node 0
swapB on node 1
swapC on node 2
swapD on node 3
After they are all swapped on in the sequence of ABCD.
Current behaviour:
their priorities will be:
swapA: -1
swapB: -2
swapC: -3
swapD: -4
And their position in the global swap_avail_list will be:
swapA -> swapB -> swapC -> swapD
prio:1 prio:2 prio:3 prio:4
New behaviour:
their priorities will be(note that -1 is skipped):
swapA: -2
swapB: -3
swapC: -4
swapD: -5
And their positions in the 4 swap_avail_lists[nid] will be:
swap_avail_lists[0]: /* node 0's available swap device list */
swapA -> swapB -> swapC -> swapD
prio:1 prio:3 prio:4 prio:5
swap_avali_lists[1]: /* node 1's available swap device list */
swapB -> swapA -> swapC -> swapD
prio:1 prio:2 prio:4 prio:5
swap_avail_lists[2]: /* node 2's available swap device list */
swapC -> swapA -> swapB -> swapD
prio:1 prio:2 prio:3 prio:5
swap_avail_lists[3]: /* node 3's available swap device list */
swapD -> swapA -> swapB -> swapC
prio:1 prio:2 prio:3 prio:4
To see the effect of the patch, a test that starts N process, each mmap a
region of anonymous memory and then continually write to it at random
position to trigger both swap in and out is used.
On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are
used as swap devices with each attached to a different node, the result
is:
runtime=30m/processes=32/total test size=128G/each process mmap region=4G
kernel throughput
vanilla 13306
auto-binding 15169 +14%
runtime=30m/processes=64/total test size=128G/each process mmap region=2G
kernel throughput
vanilla 11885
auto-binding 14879 +25%
[aaron.lu@xxxxxxxxx: v2]
Link: http://lkml.kernel.org/r/20170814053130.GD2369@xxxxxxxxxxxxxxxxxxxx
Link: http://lkml.kernel.org/r/20170816024439.GA10925@xxxxxxxxxxxxxxxxxxxx
[akpm@xxxxxxxxxxxxxxxxxxxx: use kmalloc_array()]
Link: http://lkml.kernel.org/r/20170814053130.GD2369@xxxxxxxxxxxxxxxxxxxx
Link: http://lkml.kernel.org/r/20170816024439.GA10925@xxxxxxxxxxxxxxxxxxxx
Signed-off-by: Aaron Lu <aaron.lu@xxxxxxxxx>
Cc: "Chen, Tim C" <tim.c.chen@xxxxxxxxx>
Cc: Huang Ying <ying.huang@xxxxxxxxx>
Cc: Andi Kleen <andi@xxxxxxxxxxxxxx>
Cc: Michal Hocko <mhocko@xxxxxxxx>
Cc: Minchan Kim <minchan@xxxxxxxxxx>
Cc: Hugh Dickins <hughd@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
Documentation/vm/swap_numa.txt | 69 +++++++++++++++++
include/linux/swap.h | 2
mm/swapfile.c | 120 ++++++++++++++++++++++++-------
3 files changed, 164 insertions(+), 27 deletions(-)
diff -puN /dev/null Documentation/vm/swap_numa.txt
--- /dev/null
+++ a/Documentation/vm/swap_numa.txt
@@ -0,0 +1,69 @@
+Automatically bind swap device to numa node
+-------------------------------------------
+
+If the system has more than one swap device and swap device has the node
+information, we can make use of this information to decide which swap
+device to use in get_swap_pages() to get better performance.
+
+
+How to use this feature
+-----------------------
+
+Swap device has priority and that decides the order of it to be used. To make
+use of automatically binding, there is no need to manipulate priority settings
+for swap devices. e.g. on a 2 node machine, assume 2 swap devices swapA and
+swapB, with swapA attached to node 0 and swapB attached to node 1, are going
+to be swapped on. Simply swapping them on by doing:
+# swapon /dev/swapA
+# swapon /dev/swapB
+
+Then node 0 will use the two swap devices in the order of swapA then swapB and
+node 1 will use the two swap devices in the order of swapB then swapA. Note
+that the order of them being swapped on doesn't matter.
+
+A more complex example on a 4 node machine. Assume 6 swap devices are going to
+be swapped on: swapA and swapB are attached to node 0, swapC is attached to
+node 1, swapD and swapE are attached to node 2 and swapF is attached to node3.
+The way to swap them on is the same as above:
+# swapon /dev/swapA
+# swapon /dev/swapB
+# swapon /dev/swapC
+# swapon /dev/swapD
+# swapon /dev/swapE
+# swapon /dev/swapF
+
+Then node 0 will use them in the order of:
+swapA/swapB -> swapC -> swapD -> swapE -> swapF
+swapA and swapB will be used in a round robin mode before any other swap device.
+
+node 1 will use them in the order of:
+swapC -> swapA -> swapB -> swapD -> swapE -> swapF
+
+node 2 will use them in the order of:
+swapD/swapE -> swapA -> swapB -> swapC -> swapF
+Similaly, swapD and swapE will be used in a round robin mode before any
+other swap devices.
+
+node 3 will use them in the order of:
+swapF -> swapA -> swapB -> swapC -> swapD -> swapE
+
+
+Implementation details
+----------------------
+
+The current code uses a priority based list, swap_avail_list, to decide
+which swap device to use and if multiple swap devices share the same
+priority, they are used round robin. This change here replaces the single
+global swap_avail_list with a per-numa-node list, i.e. for each numa node,
+it sees its own priority based list of available swap devices. Swap
+device's priority can be promoted on its matching node's swap_avail_list.
+
+The current swap device's priority is set as: user can set a >=0 value,
+or the system will pick one starting from -1 then downwards. The priority
+value in the swap_avail_list is the negated value of the swap device's
+due to plist being sorted from low to high. The new policy doesn't change
+the semantics for priority >=0 cases, the previous starting from -1 then
+downwards now becomes starting from -2 then downwards and -1 is reserved
+as the promoted value. So if multiple swap devices are attached to the same
+node, they will all be promoted to priority -1 on that node's plist and will
+be used round robin before any other swap devices.
diff -puN include/linux/swap.h~swap-choose-swap-device-according-to-numa-node include/linux/swap.h
--- a/include/linux/swap.h~swap-choose-swap-device-according-to-numa-node
+++ a/include/linux/swap.h
@@ -212,7 +212,7 @@ struct swap_info_struct {
unsigned long flags; /* SWP_USED etc: see above */
signed short prio; /* swap priority of this type */
struct plist_node list; /* entry in swap_active_head */
- struct plist_node avail_list; /* entry in swap_avail_head */
+ struct plist_node avail_lists[MAX_NUMNODES];/* entry in swap_avail_heads */
signed char type; /* strange name for an index */
unsigned int max; /* extent of the swap_map */
unsigned char *swap_map; /* vmalloc'ed array of usage counts */
diff -puN mm/swapfile.c~swap-choose-swap-device-according-to-numa-node mm/swapfile.c
--- a/mm/swapfile.c~swap-choose-swap-device-according-to-numa-node
+++ a/mm/swapfile.c
@@ -60,7 +60,7 @@ atomic_long_t nr_swap_pages;
EXPORT_SYMBOL_GPL(nr_swap_pages);
/* protected with swap_lock. reading in vm_swap_full() doesn't need lock */
long total_swap_pages;
-static int least_priority;
+static int least_priority = -1;
static const char Bad_file[] = "Bad swap file entry ";
static const char Unused_file[] = "Unused swap file entry ";
@@ -85,7 +85,7 @@ PLIST_HEAD(swap_active_head);
* is held and the locking order requires swap_lock to be taken
* before any swap_info_struct->lock.
*/
-static PLIST_HEAD(swap_avail_head);
+struct plist_head *swap_avail_heads;
static DEFINE_SPINLOCK(swap_avail_lock);
struct swap_info_struct *swap_info[MAX_SWAPFILES];
@@ -592,6 +592,21 @@ new_cluster:
return found_free;
}
+static void __del_from_avail_list(struct swap_info_struct *p)
+{
+ int nid;
+
+ for_each_node(nid)
+ plist_del(&p->avail_lists[nid], &swap_avail_heads[nid]);
+}
+
+static void del_from_avail_list(struct swap_info_struct *p)
+{
+ spin_lock(&swap_avail_lock);
+ __del_from_avail_list(p);
+ spin_unlock(&swap_avail_lock);
+}
+
static void swap_range_alloc(struct swap_info_struct *si, unsigned long offset,
unsigned int nr_entries)
{
@@ -605,12 +620,22 @@ static void swap_range_alloc(struct swap
if (si->inuse_pages == si->pages) {
si->lowest_bit = si->max;
si->highest_bit = 0;
- spin_lock(&swap_avail_lock);
- plist_del(&si->avail_list, &swap_avail_head);
- spin_unlock(&swap_avail_lock);
+ del_from_avail_list(si);
}
}
+static void add_to_avail_list(struct swap_info_struct *p)
+{
+ int nid;
+
+ spin_lock(&swap_avail_lock);
+ for_each_node(nid) {
+ WARN_ON(!plist_node_empty(&p->avail_lists[nid]));
+ plist_add(&p->avail_lists[nid], &swap_avail_heads[nid]);
+ }
+ spin_unlock(&swap_avail_lock);
+}
+
static void swap_range_free(struct swap_info_struct *si, unsigned long offset,
unsigned int nr_entries)
{
@@ -623,13 +648,8 @@ static void swap_range_free(struct swap_
bool was_full = !si->highest_bit;
si->highest_bit = end;
- if (was_full && (si->flags & SWP_WRITEOK)) {
- spin_lock(&swap_avail_lock);
- WARN_ON(!plist_node_empty(&si->avail_list));
- if (plist_node_empty(&si->avail_list))
- plist_add(&si->avail_list, &swap_avail_head);
- spin_unlock(&swap_avail_lock);
- }
+ if (was_full && (si->flags & SWP_WRITEOK))
+ add_to_avail_list(si);
}
atomic_long_add(nr_entries, &nr_swap_pages);
si->inuse_pages -= nr_entries;
@@ -910,6 +930,7 @@ int get_swap_pages(int n_goal, bool clus
struct swap_info_struct *si, *next;
long avail_pgs;
int n_ret = 0;
+ int node;
/* Only single cluster request supported */
WARN_ON_ONCE(n_goal > 1 && cluster);
@@ -929,14 +950,15 @@ int get_swap_pages(int n_goal, bool clus
spin_lock(&swap_avail_lock);
start_over:
- plist_for_each_entry_safe(si, next, &swap_avail_head, avail_list) {
+ node = numa_node_id();
+ plist_for_each_entry_safe(si, next, &swap_avail_heads[node], avail_lists[node]) {
/* requeue si to after same-priority siblings */
- plist_requeue(&si->avail_list, &swap_avail_head);
+ plist_requeue(&si->avail_lists[node], &swap_avail_heads[node]);
spin_unlock(&swap_avail_lock);
spin_lock(&si->lock);
if (!si->highest_bit || !(si->flags & SWP_WRITEOK)) {
spin_lock(&swap_avail_lock);
- if (plist_node_empty(&si->avail_list)) {
+ if (plist_node_empty(&si->avail_lists[node])) {
spin_unlock(&si->lock);
goto nextsi;
}
@@ -946,7 +968,7 @@ start_over:
WARN(!(si->flags & SWP_WRITEOK),
"swap_info %d in list but !SWP_WRITEOK\n",
si->type);
- plist_del(&si->avail_list, &swap_avail_head);
+ __del_from_avail_list(si);
spin_unlock(&si->lock);
goto nextsi;
}
@@ -975,7 +997,7 @@ nextsi:
* swap_avail_head list then try it, otherwise start over
* if we have not gotten any slots.
*/
- if (plist_node_empty(&next->avail_list))
+ if (plist_node_empty(&next->avail_lists[node]))
goto start_over;
}
@@ -2410,10 +2432,24 @@ static int setup_swap_extents(struct swa
return generic_swapfile_activate(sis, swap_file, span);
}
+static int swap_node(struct swap_info_struct *p)
+{
+ struct block_device *bdev;
+
+ if (p->bdev)
+ bdev = p->bdev;
+ else
+ bdev = p->swap_file->f_inode->i_sb->s_bdev;
+
+ return bdev ? bdev->bd_disk->node_id : NUMA_NO_NODE;
+}
+
static void _enable_swap_info(struct swap_info_struct *p, int prio,
unsigned char *swap_map,
struct swap_cluster_info *cluster_info)
{
+ int i;
+
if (prio >= 0)
p->prio = prio;
else
@@ -2423,7 +2459,16 @@ static void _enable_swap_info(struct swa
* low-to-high, while swap ordering is high-to-low
*/
p->list.prio = -p->prio;
- p->avail_list.prio = -p->prio;
+ for_each_node(i) {
+ if (p->prio >= 0)
+ p->avail_lists[i].prio = -p->prio;
+ else {
+ if (swap_node(p) == i)
+ p->avail_lists[i].prio = 1;
+ else
+ p->avail_lists[i].prio = -p->prio;
+ }
+ }
p->swap_map = swap_map;
p->cluster_info = cluster_info;
p->flags |= SWP_WRITEOK;
@@ -2442,9 +2487,7 @@ static void _enable_swap_info(struct swa
* swap_info_struct.
*/
plist_add(&p->list, &swap_active_head);
- spin_lock(&swap_avail_lock);
- plist_add(&p->avail_list, &swap_avail_head);
- spin_unlock(&swap_avail_lock);
+ add_to_avail_list(p);
}
static void enable_swap_info(struct swap_info_struct *p, int prio,
@@ -2529,17 +2572,19 @@ SYSCALL_DEFINE1(swapoff, const char __us
spin_unlock(&swap_lock);
goto out_dput;
}
- spin_lock(&swap_avail_lock);
- plist_del(&p->avail_list, &swap_avail_head);
- spin_unlock(&swap_avail_lock);
+ del_from_avail_list(p);
spin_lock(&p->lock);
if (p->prio < 0) {
struct swap_info_struct *si = p;
+ int nid;
plist_for_each_entry_continue(si, &swap_active_head, list) {
si->prio++;
si->list.prio--;
- si->avail_list.prio--;
+ for_each_node(nid) {
+ if (si->avail_lists[nid].prio != 1)
+ si->avail_lists[nid].prio--;
+ }
}
least_priority++;
}
@@ -2783,6 +2828,7 @@ static struct swap_info_struct *alloc_sw
{
struct swap_info_struct *p;
unsigned int type;
+ int i;
p = kzalloc(sizeof(*p), GFP_KERNEL);
if (!p)
@@ -2818,7 +2864,8 @@ static struct swap_info_struct *alloc_sw
}
INIT_LIST_HEAD(&p->first_swap_extent.list);
plist_node_init(&p->list, 0);
- plist_node_init(&p->avail_list, 0);
+ for_each_node(i)
+ plist_node_init(&p->avail_lists[i], 0);
p->flags = SWP_USED;
spin_unlock(&swap_lock);
spin_lock_init(&p->lock);
@@ -3060,6 +3107,9 @@ SYSCALL_DEFINE2(swapon, const char __use
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
+ if (!swap_avail_heads)
+ return -ENOMEM;
+
p = alloc_swap_info();
if (IS_ERR(p))
return PTR_ERR(p);
@@ -3645,3 +3695,21 @@ static void free_swap_count_continuation
}
}
}
+
+static int __init swapfile_init(void)
+{
+ int nid;
+
+ swap_avail_heads = kmalloc_array(nr_node_ids, sizeof(struct plist_head),
+ GFP_KERNEL);
+ if (!swap_avail_heads) {
+ pr_emerg("Not enough memory for swap heads, swap is disabled\n");
+ return -ENOMEM;
+ }
+
+ for_each_node(nid)
+ plist_head_init(&swap_avail_heads[nid]);
+
+ return 0;
+}
+subsys_initcall(swapfile_init);
_
Patches currently in -mm which might be from aaron.lu@xxxxxxxxx are
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
