[merged] treewide-correct-diffrent-and-banlance-typos.patch removed from -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch titled
     Subject: treewide: spelling: correct diffrent[iate] and banlance typos
has been removed from the -mm tree.  Its filename was
     treewide-correct-diffrent-and-banlance-typos.patch

This patch was dropped because it was merged into mainline or a subsystem tree

------------------------------------------------------
From: Joe Perches <joe@xxxxxxxxxxx>
Subject: treewide: spelling: correct diffrent[iate] and banlance typos

Add these misspellings to scripts/spelling.txt too

Link: http://lkml.kernel.org/r/962aace119675e5fe87be2a88ddac1a5486f8e60.1490931810.git.joe@xxxxxxxxxxx
Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
Acked-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 drivers/media/dvb-frontends/drx39xyj/drx_dap_fasi.h |    2 +-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c      |    2 +-
 drivers/net/ethernet/qlogic/qed/qed_int.c           |    2 +-
 drivers/net/ethernet/qlogic/qed/qed_main.c          |    2 +-
 drivers/net/ethernet/qlogic/qed/qed_sriov.c         |    2 +-
 include/linux/mlx4/device.h                         |    2 +-
 scripts/spelling.txt                                |    3 +++
 7 files changed, 9 insertions(+), 6 deletions(-)

diff -puN drivers/media/dvb-frontends/drx39xyj/drx_dap_fasi.h~treewide-correct-diffrent-and-banlance-typos drivers/media/dvb-frontends/drx39xyj/drx_dap_fasi.h
--- a/drivers/media/dvb-frontends/drx39xyj/drx_dap_fasi.h~treewide-correct-diffrent-and-banlance-typos
+++ a/drivers/media/dvb-frontends/drx39xyj/drx_dap_fasi.h
@@ -70,7 +70,7 @@
 * (3) both long and short but short preferred and long only when necesarry
 *
 * These modes must be selected compile time via compile switches.
-* Compile switch settings for the diffrent modes:
+* Compile switch settings for the different modes:
 * (1) DRXDAPFASI_LONG_ADDR_ALLOWED=0, DRXDAPFASI_SHORT_ADDR_ALLOWED=1
 * (2) DRXDAPFASI_LONG_ADDR_ALLOWED=1, DRXDAPFASI_SHORT_ADDR_ALLOWED=0
 * (3) DRXDAPFASI_LONG_ADDR_ALLOWED=1, DRXDAPFASI_SHORT_ADDR_ALLOWED=1
diff -puN drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c~treewide-correct-diffrent-and-banlance-typos drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c~treewide-correct-diffrent-and-banlance-typos
+++ a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -1591,7 +1591,7 @@ static int __bnx2x_vlan_mac_execute_step
 	if (rc != 0) {
 		__bnx2x_vlan_mac_h_pend(bp, o, *ramrod_flags);
 
-		/* Calling function should not diffrentiate between this case
+		/* Calling function should not differentiate between this case
 		 * and the case in which there is already a pending ramrod
 		 */
 		rc = 1;
diff -puN drivers/net/ethernet/qlogic/qed/qed_int.c~treewide-correct-diffrent-and-banlance-typos drivers/net/ethernet/qlogic/qed/qed_int.c
--- a/drivers/net/ethernet/qlogic/qed/qed_int.c~treewide-correct-diffrent-and-banlance-typos
+++ a/drivers/net/ethernet/qlogic/qed/qed_int.c
@@ -3058,7 +3058,7 @@ int qed_int_igu_read_cam(struct qed_hwfn
 
 	/* There's a possibility the igu_sb_cnt_iov doesn't properly reflect
 	 * the number of VF SBs [especially for first VF on engine, as we can't
-	 * diffrentiate between empty entries and its entries].
+	 * differentiate between empty entries and its entries].
 	 * Since we don't really support more SBs than VFs today, prevent any
 	 * such configuration by sanitizing the number of SBs to equal the
 	 * number of VFs.
diff -puN drivers/net/ethernet/qlogic/qed/qed_main.c~treewide-correct-diffrent-and-banlance-typos drivers/net/ethernet/qlogic/qed/qed_main.c
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c~treewide-correct-diffrent-and-banlance-typos
+++ a/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -978,7 +978,7 @@ static int qed_slowpath_start(struct qed
 		if (rc)
 			goto err2;
 
-		/* First Dword used to diffrentiate between various sources */
+		/* First Dword used to differentiate between various sources */
 		data = cdev->firmware->data + sizeof(u32);
 
 		qed_dbg_pf_init(cdev);
diff -puN drivers/net/ethernet/qlogic/qed/qed_sriov.c~treewide-correct-diffrent-and-banlance-typos drivers/net/ethernet/qlogic/qed/qed_sriov.c
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c~treewide-correct-diffrent-and-banlance-typos
+++ a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
@@ -625,7 +625,7 @@ int qed_iov_hw_info(struct qed_hwfn *p_h
 	 *  - If !ARI, VFs would start on next device.
 	 *    so offset - (256 - pf_id) would provide the number.
 	 * Utilize the fact that (256 - pf_id) is achieved only by later
-	 * to diffrentiate between the two.
+	 * to differentiate between the two.
 	 */
 
 	if (p_hwfn->cdev->p_iov_info->offset < (256 - p_hwfn->abs_pf_id)) {
diff -puN include/linux/mlx4/device.h~treewide-correct-diffrent-and-banlance-typos include/linux/mlx4/device.h
--- a/include/linux/mlx4/device.h~treewide-correct-diffrent-and-banlance-typos
+++ a/include/linux/mlx4/device.h
@@ -108,7 +108,7 @@ enum {
 	MLX4_MFUNC_EQE_MASK     = (MLX4_MFUNC_MAX_EQES - 1)
 };
 
-/* Driver supports 3 diffrent device methods to manage traffic steering:
+/* Driver supports 3 different device methods to manage traffic steering:
  *	-device managed - High level API for ib and eth flow steering. FW is
  *			  managing flow steering tables.
  *	- B0 steering mode - Common low level API for ib and (if supported) eth.
diff -puN scripts/spelling.txt~treewide-correct-diffrent-and-banlance-typos scripts/spelling.txt
--- a/scripts/spelling.txt~treewide-correct-diffrent-and-banlance-typos
+++ a/scripts/spelling.txt
@@ -179,6 +179,7 @@ bakup||backup
 baloon||balloon
 baloons||balloons
 bandwith||bandwidth
+banlance||balance
 batery||battery
 beacuse||because
 becasue||because
@@ -375,6 +376,8 @@ dictionnary||dictionary
 didnt||didn't
 diferent||different
 differrence||difference
+diffrent||different
+diffrentiate||differentiate
 difinition||definition
 diplay||display
 direectly||directly
_

Patches currently in -mm which might be from joe@xxxxxxxxxxx are


--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux