[patch 029/102] mm, vmstat: print non-populated zones in zoneinfo

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: David Rientjes <rientjes@xxxxxxxxxx>
Subject: mm, vmstat: print non-populated zones in zoneinfo

Initscripts can use the information (protection levels) from
/proc/zoneinfo to configure vm.lowmem_reserve_ratio at boot.

vm.lowmem_reserve_ratio is an array of ratios for each configured zone on
the system.  If a zone is not populated on an arch, /proc/zoneinfo
suppresses its output.

This results in there not being a 1:1 mapping between the set of zones
emitted by /proc/zoneinfo and the zones configured by
vm.lowmem_reserve_ratio.

This patch shows statistics for non-populated zones in /proc/zoneinfo. 
The zones exist and hold a spot in the vm.lowmem_reserve_ratio array. 
Without this patch, it is not possible to determine which index in the
array controls which zone if one or more zones on the system are not
populated.

Remaining users of walk_zones_in_node() are unchanged.  Files such as
/proc/pagetypeinfo require certain zone data to be initialized properly
for display, which is not done for unpopulated zones.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1703031451310.98023@xxxxxxxxxxxxxxxxxxxxxxxxx
Signed-off-by: David Rientjes <rientjes@xxxxxxxxxx>
Reviewed-by: Anshuman Khandual <khandual@xxxxxxxxxxxxxxxxxx>
Cc: Vlastimil Babka <vbabka@xxxxxxx>
Cc: Mel Gorman <mgorman@xxxxxxxxxxxxxxxxxxx>
Cc: Johannes Weiner <hannes@xxxxxxxxxxx>
Cc: Michal Hocko <mhocko@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 mm/vmstat.c |   27 +++++++++++++++++----------
 1 file changed, 17 insertions(+), 10 deletions(-)

diff -puN mm/vmstat.c~mm-vmstat-print-non-populated-zones-in-zoneinfo mm/vmstat.c
--- a/mm/vmstat.c~mm-vmstat-print-non-populated-zones-in-zoneinfo
+++ a/mm/vmstat.c
@@ -1124,8 +1124,12 @@ static void frag_stop(struct seq_file *m
 {
 }
 
-/* Walk all the zones in a node and print using a callback */
+/*
+ * Walk zones in a node and print using a callback.
+ * If @assert_populated is true, only use callback for zones that are populated.
+ */
 static void walk_zones_in_node(struct seq_file *m, pg_data_t *pgdat,
+		bool assert_populated,
 		void (*print)(struct seq_file *m, pg_data_t *, struct zone *))
 {
 	struct zone *zone;
@@ -1133,7 +1137,7 @@ static void walk_zones_in_node(struct se
 	unsigned long flags;
 
 	for (zone = node_zones; zone - node_zones < MAX_NR_ZONES; ++zone) {
-		if (!populated_zone(zone))
+		if (assert_populated && !populated_zone(zone))
 			continue;
 
 		spin_lock_irqsave(&zone->lock, flags);
@@ -1161,7 +1165,7 @@ static void frag_show_print(struct seq_f
 static int frag_show(struct seq_file *m, void *arg)
 {
 	pg_data_t *pgdat = (pg_data_t *)arg;
-	walk_zones_in_node(m, pgdat, frag_show_print);
+	walk_zones_in_node(m, pgdat, true, frag_show_print);
 	return 0;
 }
 
@@ -1202,7 +1206,7 @@ static int pagetypeinfo_showfree(struct
 		seq_printf(m, "%6d ", order);
 	seq_putc(m, '\n');
 
-	walk_zones_in_node(m, pgdat, pagetypeinfo_showfree_print);
+	walk_zones_in_node(m, pgdat, true, pagetypeinfo_showfree_print);
 
 	return 0;
 }
@@ -1254,7 +1258,7 @@ static int pagetypeinfo_showblockcount(s
 	for (mtype = 0; mtype < MIGRATE_TYPES; mtype++)
 		seq_printf(m, "%12s ", migratetype_names[mtype]);
 	seq_putc(m, '\n');
-	walk_zones_in_node(m, pgdat, pagetypeinfo_showblockcount_print);
+	walk_zones_in_node(m, pgdat, true, pagetypeinfo_showblockcount_print);
 
 	return 0;
 }
@@ -1280,7 +1284,7 @@ static void pagetypeinfo_showmixedcount(
 		seq_printf(m, "%12s ", migratetype_names[mtype]);
 	seq_putc(m, '\n');
 
-	walk_zones_in_node(m, pgdat, pagetypeinfo_showmixedcount_print);
+	walk_zones_in_node(m, pgdat, true, pagetypeinfo_showmixedcount_print);
 #endif /* CONFIG_PAGE_OWNER */
 }
 
@@ -1430,12 +1434,15 @@ static void zoneinfo_show_print(struct s
 }
 
 /*
- * Output information about zones in @pgdat.
+ * Output information about zones in @pgdat.  All zones are printed regardless
+ * of whether they are populated or not: lowmem_reserve_ratio operates on the
+ * set of all zones and userspace would not be aware of such zones if they are
+ * suppressed here (zoneinfo displays the effect of lowmem_reserve_ratio).
  */
 static int zoneinfo_show(struct seq_file *m, void *arg)
 {
 	pg_data_t *pgdat = (pg_data_t *)arg;
-	walk_zones_in_node(m, pgdat, zoneinfo_show_print);
+	walk_zones_in_node(m, pgdat, false, zoneinfo_show_print);
 	return 0;
 }
 
@@ -1841,7 +1848,7 @@ static int unusable_show(struct seq_file
 	if (!node_state(pgdat->node_id, N_MEMORY))
 		return 0;
 
-	walk_zones_in_node(m, pgdat, unusable_show_print);
+	walk_zones_in_node(m, pgdat, true, unusable_show_print);
 
 	return 0;
 }
@@ -1893,7 +1900,7 @@ static int extfrag_show(struct seq_file
 {
 	pg_data_t *pgdat = (pg_data_t *)arg;
 
-	walk_zones_in_node(m, pgdat, extfrag_show_print);
+	walk_zones_in_node(m, pgdat, true, extfrag_show_print);
 
 	return 0;
 }
_
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux