The patch titled
Subject: scripts/spelling.txt: add "swith" pattern and fix typo instances
has been removed from the -mm tree. Its filename was
scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
Subject: scripts/spelling.txt: add "swith" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:
swith||switch
swithable||switchable
swithed||switched
swithing||switching
While we are here, fix the "update" to "updates" in the touched hunk
in drivers/net/wireless/marvell/mwifiex/wmm.c.
Link: http://lkml.kernel.org/r/1481573103-11329-2-git-send-email-yamada.masahiro@xxxxxxxxxxxxx
Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 2 +-
Documentation/devicetree/bindings/power/pd-samsung.txt | 2 +-
arch/arm/boot/compressed/head.S | 2 +-
arch/arm/mm/cache-v7.S | 2 +-
arch/arm/mm/cache-v7m.S | 2 +-
arch/sh/kernel/irq.c | 2 +-
arch/sparc/include/asm/switch_to_32.h | 2 +-
drivers/gpu/drm/amd/include/atombios.h | 2 +-
drivers/gpu/drm/radeon/atombios.h | 2 +-
drivers/isdn/mISDN/dsp_core.c | 2 +-
drivers/net/usb/kalmia.c | 2 +-
drivers/net/wireless/marvell/mwifiex/wmm.c | 4 ++--
net/mac80211/mesh.c | 2 +-
scripts/recordmcount.pl | 2 +-
scripts/spelling.txt | 4 ++++
sound/pci/ac97/ac97_patch.c | 2 +-
16 files changed, 20 insertions(+), 16 deletions(-)
diff -puN Documentation/devicetree/bindings/mfd/qcom-rpm.txt~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances Documentation/devicetree/bindings/mfd/qcom-rpm.txt
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances
+++ a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -234,7 +234,7 @@ see regulator.txt - with additional cust
- qcom,switch-mode-frequency:
Usage: required
Value type: <u32>
- Definition: Frequency (Hz) of the swith mode power supply;
+ Definition: Frequency (Hz) of the switch mode power supply;
must be one of:
19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
diff -puN Documentation/devicetree/bindings/power/pd-samsung.txt~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances Documentation/devicetree/bindings/power/pd-samsung.txt
--- a/Documentation/devicetree/bindings/power/pd-samsung.txt~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances
+++ a/Documentation/devicetree/bindings/power/pd-samsung.txt
@@ -23,7 +23,7 @@ Optional Properties:
- clock-names: The following clocks can be specified:
- oscclk: Oscillator clock.
- clkN: Input clocks to the devices in this power domain. These clocks
- will be reparented to oscclk before swithing power domain off.
+ will be reparented to oscclk before switching power domain off.
Their original parent will be brought back after turning on
the domain. Maximum of 4 clocks (N = 0 to 3) are supported.
- asbN: Clocks required by asynchronous bridges (ASB) present in
diff -puN arch/arm/boot/compressed/head.S~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances arch/arm/boot/compressed/head.S
--- a/arch/arm/boot/compressed/head.S~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances
+++ a/arch/arm/boot/compressed/head.S
@@ -1196,7 +1196,7 @@ skip:
bgt loop1
finished:
ldmfd sp!, {r0-r7, r9-r11}
- mov r10, #0 @ swith back to cache level 0
+ mov r10, #0 @ switch back to cache level 0
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
iflush:
mcr p15, 0, r10, c7, c10, 4 @ DSB
diff -puN arch/arm/mm/cache-v7.S~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances arch/arm/mm/cache-v7.S
--- a/arch/arm/mm/cache-v7.S~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances
+++ a/arch/arm/mm/cache-v7.S
@@ -164,7 +164,7 @@ skip:
cmp r3, r10
bgt flush_levels
finished:
- mov r10, #0 @ swith back to cache level 0
+ mov r10, #0 @ switch back to cache level 0
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
dsb st
isb
diff -puN arch/arm/mm/cache-v7m.S~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances arch/arm/mm/cache-v7m.S
--- a/arch/arm/mm/cache-v7m.S~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances
+++ a/arch/arm/mm/cache-v7m.S
@@ -217,7 +217,7 @@ skip:
cmp r3, r10
bgt flush_levels
finished:
- mov r10, #0 @ swith back to cache level 0
+ mov r10, #0 @ switch back to cache level 0
write_csselr r10, r3 @ select current cache level in cssr
dsb st
isb
diff -puN arch/sh/kernel/irq.c~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances arch/sh/kernel/irq.c
--- a/arch/sh/kernel/irq.c~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances
+++ a/arch/sh/kernel/irq.c
@@ -99,7 +99,7 @@ static inline void handle_one_irq(unsign
"mov %0, r4 \n"
"mov r15, r8 \n"
"jsr @%1 \n"
- /* swith to the irq stack */
+ /* switch to the irq stack */
" mov %2, r15 \n"
/* restore the stack (ring zero) */
"mov r8, r15 \n"
diff -puN arch/sparc/include/asm/switch_to_32.h~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances arch/sparc/include/asm/switch_to_32.h
--- a/arch/sparc/include/asm/switch_to_32.h~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances
+++ a/arch/sparc/include/asm/switch_to_32.h
@@ -9,7 +9,7 @@ extern struct thread_info *current_set[N
* Flush windows so that the VM switch which follows
* would not pull the stack from under us.
*
- * SWITCH_ENTER and SWITH_DO_LAZY_FPU do not work yet (e.g. SMP does not work)
+ * SWITCH_ENTER and SWITCH_DO_LAZY_FPU do not work yet (e.g. SMP does not work)
* XXX WTF is the above comment? Found in late teen 2.4.x.
*/
#ifdef CONFIG_SMP
diff -puN drivers/gpu/drm/amd/include/atombios.h~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances drivers/gpu/drm/amd/include/atombios.h
--- a/drivers/gpu/drm/amd/include/atombios.h~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances
+++ a/drivers/gpu/drm/amd/include/atombios.h
@@ -4361,7 +4361,7 @@ typedef struct _ATOM_GPIO_PIN_ASSIGNMENT
// GPIO use to control PCIE_VDDC in certain SLT board
#define PCIE_VDDC_CONTROL_GPIO_PINID 56
-//from SMU7.x, if ucGPIO_ID=PP_AC_DC_SWITCH_GPIO_PINID in GPIO_LUTTable, AC/DC swithing feature is enable
+//from SMU7.x, if ucGPIO_ID=PP_AC_DC_SWITCH_GPIO_PINID in GPIO_LUTTable, AC/DC switching feature is enable
#define PP_AC_DC_SWITCH_GPIO_PINID 60
//from SMU7.x, if ucGPIO_ID=VDDC_REGULATOR_VRHOT_GPIO_PINID in GPIO_LUTable, VRHot feature is enable
#define VDDC_VRHOT_GPIO_PINID 61
diff -puN drivers/gpu/drm/radeon/atombios.h~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances drivers/gpu/drm/radeon/atombios.h
--- a/drivers/gpu/drm/radeon/atombios.h~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances
+++ a/drivers/gpu/drm/radeon/atombios.h
@@ -3883,7 +3883,7 @@ typedef struct _ATOM_GPIO_PIN_ASSIGNMENT
}ATOM_GPIO_PIN_ASSIGNMENT;
//ucGPIO_ID pre-define id for multiple usage
-//from SMU7.x, if ucGPIO_ID=PP_AC_DC_SWITCH_GPIO_PINID in GPIO_LUTTable, AC/DC swithing feature is enable
+//from SMU7.x, if ucGPIO_ID=PP_AC_DC_SWITCH_GPIO_PINID in GPIO_LUTTable, AC/DC switching feature is enable
#define PP_AC_DC_SWITCH_GPIO_PINID 60
//from SMU7.x, if ucGPIO_ID=VDDC_REGULATOR_VRHOT_GPIO_PINID in GPIO_LUTable, VRHot feature is enable
#define VDDC_VRHOT_GPIO_PINID 61
diff -puN drivers/isdn/mISDN/dsp_core.c~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances drivers/isdn/mISDN/dsp_core.c
--- a/drivers/isdn/mISDN/dsp_core.c~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances
+++ a/drivers/isdn/mISDN/dsp_core.c
@@ -115,7 +115,7 @@
*
* The CMX has special functions for conferences with one, two and more
* members. It will allow different types of data flow. Receive and transmit
- * data to/form upper layer may be swithed on/off individually without losing
+ * data to/form upper layer may be switched on/off individually without losing
* features of CMX, Tones and DTMF.
*
* Echo Cancellation: Sometimes we like to cancel echo from the interface.
diff -puN drivers/net/usb/kalmia.c~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances drivers/net/usb/kalmia.c
--- a/drivers/net/usb/kalmia.c~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances
+++ a/drivers/net/usb/kalmia.c
@@ -343,7 +343,7 @@ static const struct driver_info kalmia_i
static const struct usb_device_id products[] = {
/* The unswitched USB ID, to get the module auto loaded: */
{ USB_DEVICE(0x04e8, 0x689a) },
- /* The stick swithed into modem (by e.g. usb_modeswitch): */
+ /* The stick switched into modem (by e.g. usb_modeswitch): */
{ USB_DEVICE(0x04e8, 0x6889),
.driver_info = (unsigned long) &kalmia_info, },
{ /* EMPTY == end of list */} };
diff -puN drivers/net/wireless/marvell/mwifiex/wmm.c~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances drivers/net/wireless/marvell/mwifiex/wmm.c
--- a/drivers/net/wireless/marvell/mwifiex/wmm.c~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances
+++ a/drivers/net/wireless/marvell/mwifiex/wmm.c
@@ -673,8 +673,8 @@ void mwifiex_update_ralist_tx_pause(stru
spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags);
}
-/* This function update non-tdls peer ralist tx_pause while
- * tdls channel swithing
+/* This function updates non-tdls peer ralist tx_pause while
+ * tdls channel switching
*/
void mwifiex_update_ralist_tx_pause_in_tdls_cs(struct mwifiex_private *priv,
u8 *mac, u8 tx_pause)
diff -puN net/mac80211/mesh.c~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances net/mac80211/mesh.c
--- a/net/mac80211/mesh.c~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances
+++ a/net/mac80211/mesh.c
@@ -681,7 +681,7 @@ ieee80211_mesh_build_beacon(struct ieee8
2 + /* NULL SSID */
/* Channel Switch Announcement */
2 + sizeof(struct ieee80211_channel_sw_ie) +
- /* Mesh Channel Swith Parameters */
+ /* Mesh Channel Switch Parameters */
2 + sizeof(struct ieee80211_mesh_chansw_params_ie) +
2 + 8 + /* supported rates */
2 + 3; /* DS params */
diff -puN scripts/recordmcount.pl~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances scripts/recordmcount.pl
--- a/scripts/recordmcount.pl~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances
+++ a/scripts/recordmcount.pl
@@ -318,7 +318,7 @@ if ($arch eq "x86_64") {
# instruction or the addiu one. herein, we record the address of the
# first one, and then we can replace this instruction by a branch
# instruction to jump over the profiling function to filter the
- # indicated functions, or swith back to the lui instruction to trace
+ # indicated functions, or switch back to the lui instruction to trace
# them, which means dynamic tracing.
#
# c: 3c030000 lui v1,0x0
diff -puN scripts/spelling.txt~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances scripts/spelling.txt
--- a/scripts/spelling.txt~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances
+++ a/scripts/spelling.txt
@@ -991,6 +991,10 @@ suspeneded||suspended
suspicously||suspiciously
swaping||swapping
switchs||switches
+swith||switch
+swithable||switchable
+swithed||switched
+swithing||switching
symetric||symmetric
synax||syntax
synchonized||synchronized
diff -puN sound/pci/ac97/ac97_patch.c~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances sound/pci/ac97/ac97_patch.c
--- a/sound/pci/ac97/ac97_patch.c~scripts-spellingtxt-add-swith-pattern-and-fix-typo-instances
+++ a/sound/pci/ac97/ac97_patch.c
@@ -3093,7 +3093,7 @@ static int patch_cm9739(struct snd_ac97
/* set-up multi channel */
/* bit 14: 0 = SPDIF, 1 = EAPD */
/* bit 13: enable internal vref output for mic */
- /* bit 12: disable center/lfe (swithable) */
+ /* bit 12: disable center/lfe (switchable) */
/* bit 10: disable surround/line (switchable) */
/* bit 9: mix 2 surround off */
/* bit 4: undocumented; 0 mutes the CM9739A, which defaults to 1 */
_
Patches currently in -mm which might be from yamada.masahiro@xxxxxxxxxxxxx are
scripts-spellingtxt-add-intialised-pattern-and-fix-typo-instances.patch
scripts-spellingtxt-add-disbled-pattern-and-fix-typo-instances.patch
scripts-spellingtxt-add-overide-pattern-and-fix-typo-instances.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
