[patch 1/8] zswap: disable changing params if init fails

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Dan Streetman <ddstreet@xxxxxxxx>
Subject: zswap: disable changing params if init fails

Add zswap_init_failed bool that prevents changing any of the module
params, if init_zswap() fails, and set zswap_enabled to false.  Change
'enabled' param to a callback, and check zswap_init_failed before allowing
any change to 'enabled', 'zpool', or 'compressor' params.

Any driver that is built-in to the kernel will not be unloaded if its init
function returns error, and its module params remain accessible for users
to change via sysfs.  Since zswap uses param callbacks, which assume that
zswap has been initialized, changing the zswap params after a failed
initialization will result in WARNING due to the param callbacks expecting
a pool to already exist.  This prevents that by immediately exiting any of
the param callbacks if initialization failed.

This was reported here:
https://marc.info/?l=linux-mm&m=147004228125528&w=4

And fixes this WARNING:
[  429.723476] WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503
__zswap_pool_current+0x56/0x60

The warning is just noise, and not serious.  However, when init fails,
zswap frees all its percpu dstmem pages and its kmem cache.  The kmem
cache might be serious, if kmem_cache_alloc(NULL, gfp) has problems;
but the percpu dstmem pages are definitely a problem, as they're used
as temporary buffer for compressed pages before copying into place in
the zpool.

If the user does get zswap enabled after an init failure, then zswap
will likely Oops on the first page it tries to compress (or worse,
start corrupting memory).

Fixes: 90b0fc26d5db ("zswap: change zpool/compressor at runtime")
Link: http://lkml.kernel.org/r/20170124200259.16191-2-ddstreet@xxxxxxxx
Signed-off-by: Dan Streetman <dan.streetman@xxxxxxxxxxxxx>
Reported-by: Marcin Miroslaw <marcin@xxxxxxxx>
Cc: Seth Jennings <sjenning@xxxxxxxxxx>
Cc: Michal Hocko <mhocko@xxxxxxxxxx>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@xxxxxxxxx>
Cc: Minchan Kim <minchan@xxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 mm/zswap.c |   30 +++++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

diff -puN mm/zswap.c~zswap-disable-changing-params-if-init-fails mm/zswap.c
--- a/mm/zswap.c~zswap-disable-changing-params-if-init-fails
+++ a/mm/zswap.c
@@ -78,7 +78,13 @@ static u64 zswap_duplicate_entry;
 
 /* Enable/disable zswap (disabled by default) */
 static bool zswap_enabled;
-module_param_named(enabled, zswap_enabled, bool, 0644);
+static int zswap_enabled_param_set(const char *,
+				   const struct kernel_param *);
+static struct kernel_param_ops zswap_enabled_param_ops = {
+	.set =		zswap_enabled_param_set,
+	.get =		param_get_bool,
+};
+module_param_cb(enabled, &zswap_enabled_param_ops, &zswap_enabled, 0644);
 
 /* Crypto compressor to use */
 #define ZSWAP_COMPRESSOR_DEFAULT "lzo"
@@ -176,6 +182,9 @@ static atomic_t zswap_pools_count = ATOM
 /* used by param callback function */
 static bool zswap_init_started;
 
+/* fatal error during init */
+static bool zswap_init_failed;
+
 /*********************************
 * helpers and fwd declarations
 **********************************/
@@ -624,6 +633,11 @@ static int __zswap_param_set(const char
 	char *s = strstrip((char *)val);
 	int ret;
 
+	if (zswap_init_failed) {
+		pr_err("can't set param, initialization failed\n");
+		return -ENODEV;
+	}
+
 	/* no change required */
 	if (!strcmp(s, *(char **)kp->arg))
 		return 0;
@@ -703,6 +717,17 @@ static int zswap_zpool_param_set(const c
 	return __zswap_param_set(val, kp, NULL, zswap_compressor);
 }
 
+static int zswap_enabled_param_set(const char *val,
+				   const struct kernel_param *kp)
+{
+	if (zswap_init_failed) {
+		pr_err("can't enable, initialization failed\n");
+		return -ENODEV;
+	}
+
+	return param_set_bool(val, kp);
+}
+
 /*********************************
 * writeback code
 **********************************/
@@ -1201,6 +1226,9 @@ hp_fail:
 dstmem_fail:
 	zswap_entry_cache_destroy();
 cache_fail:
+	/* if built-in, we aren't unloaded on failure; don't allow use */
+	zswap_init_failed = true;
+	zswap_enabled = false;
 	return -ENOMEM;
 }
 /* must be late so crypto has time to come up */
_
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux