The patch titled
revert gregkh-pci-altix-add-initial-acpi-io-support
has been removed from the -mm tree. Its filename is
revert-gregkh-pci-altix-add-initial-acpi-io-support.patch
This patch was dropped because other patches broke it
------------------------------------------------------
Subject: revert gregkh-pci-altix-add-initial-acpi-io-support
From: Andrew Morton <akpm@xxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
arch/ia64/pci/pci.c | 4
arch/ia64/sn/kernel/Makefile | 5
arch/ia64/sn/kernel/io_acpi_init.c | 198 ------
arch/ia64/sn/kernel/io_common.c | 612 ---------------------
arch/ia64/sn/kernel/io_init.c | 626 ++++++++++++++++++----
arch/ia64/sn/kernel/iomv.c | 11
arch/ia64/sn/kernel/setup.c | 18
arch/ia64/sn/kernel/tiocx.c | 2
arch/ia64/sn/pci/pcibr/pcibr_provider.c | 17
arch/ia64/sn/pci/tioce_provider.c | 18
include/asm-ia64/io.h | 2
include/asm-ia64/machvec.h | 12
include/asm-ia64/machvec_sn2.h | 2
include/asm-ia64/sn/acpi.h | 16
include/asm-ia64/sn/pcidev.h | 22
include/asm-ia64/sn/sn_feature_sets.h | 6
include/asm-ia64/sn/sn_sal.h | 1
include/linux/pci.h | 1
18 files changed, 582 insertions(+), 991 deletions(-)
diff -puN arch/ia64/pci/pci.c~revert-gregkh-pci-altix-add-initial-acpi-io-support arch/ia64/pci/pci.c
--- a/arch/ia64/pci/pci.c~revert-gregkh-pci-altix-add-initial-acpi-io-support
+++ a/arch/ia64/pci/pci.c
@@ -469,11 +469,10 @@ pcibios_fixup_resources(struct pci_dev *
}
}
-void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
+static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
{
pcibios_fixup_resources(dev, 0, PCI_BRIDGE_RESOURCES);
}
-EXPORT_SYMBOL_GPL(pcibios_fixup_device_resources);
static void __devinit pcibios_fixup_bridge_resources(struct pci_dev *dev)
{
@@ -494,7 +493,6 @@ pcibios_fixup_bus (struct pci_bus *b)
}
list_for_each_entry(dev, &b->devices, bus_list)
pcibios_fixup_device_resources(dev);
- platform_pci_fixup_bus(b);
return;
}
diff -puN arch/ia64/sn/kernel/Makefile~revert-gregkh-pci-altix-add-initial-acpi-io-support arch/ia64/sn/kernel/Makefile
--- a/arch/ia64/sn/kernel/Makefile~revert-gregkh-pci-altix-add-initial-acpi-io-support
+++ a/arch/ia64/sn/kernel/Makefile
@@ -4,14 +4,13 @@
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
-# Copyright (C) 1999,2001-2006 Silicon Graphics, Inc. All Rights Reserved.
+# Copyright (C) 1999,2001-2005 Silicon Graphics, Inc. All Rights Reserved.
#
CPPFLAGS += -I$(srctree)/arch/ia64/sn/include
obj-y += setup.o bte.o bte_error.o irq.o mca.o idle.o \
- huberror.o io_acpi_init.o io_common.o \
- io_init.o iomv.o klconflib.o pio_phys.o \
+ huberror.o io_init.o iomv.o klconflib.o pio_phys.o \
sn2/
obj-$(CONFIG_IA64_GENERIC) += machvec.o
obj-$(CONFIG_SGI_TIOCX) += tiocx.o
diff -puN arch/ia64/sn/kernel/io_acpi_init.c~revert-gregkh-pci-altix-add-initial-acpi-io-support /dev/null
--- a/arch/ia64/sn/kernel/io_acpi_init.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006 Silicon Graphics, Inc. All rights reserved.
- */
-
-#include <asm/sn/types.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/pcidev.h>
-#include <asm/sn/pcibus_provider_defs.h>
-#include <asm/sn/sn_sal.h>
-#include "xtalk/hubdev.h"
-#include <linux/acpi.h>
-
-
-/*
- * The code in this file will only be executed when running with
- * a PROM that has ACPI IO support. (i.e., SN_ACPI_BASE_SUPPORT() == 1)
- */
-
-
-/*
- * This value must match the UUID the PROM uses
- * (io/acpi/defblk.c) when building a vendor descriptor.
- */
-struct acpi_vendor_uuid sn_uuid = {
- .subtype = 0,
- .data = { 0x2c, 0xc6, 0xa6, 0xfe, 0x9c, 0x44, 0xda, 0x11,
- 0xa2, 0x7c, 0x08, 0x00, 0x69, 0x13, 0xea, 0x51 },
-};
-
-/*
- * Perform the early IO init in PROM.
- */
-static s64
-sal_ioif_init(u64 *result)
-{
- struct ia64_sal_retval isrv = {0,0,0,0};
-
- SAL_CALL_NOLOCK(isrv,
- SN_SAL_IOIF_INIT, 0, 0, 0, 0, 0, 0, 0);
- *result = isrv.v0;
- return isrv.status;
-}
-
-/*
- * sn_hubdev_add - The 'add' function of the acpi_sn_hubdev_driver.
- * Called for every "SGIHUB" or "SGITIO" device defined
- * in the ACPI namespace.
- */
-static int __init
-sn_hubdev_add(struct acpi_device *device)
-{
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- u64 addr;
- struct hubdev_info *hubdev;
- struct hubdev_info *hubdev_ptr;
- int i;
- u64 nasid;
- struct acpi_resource *resource;
- int ret = 0;
- acpi_status status;
- struct acpi_resource_vendor_typed *vendor;
- extern void sn_common_hubdev_init(struct hubdev_info *);
-
- status = acpi_get_vendor_resource(device->handle, METHOD_NAME__CRS,
- &sn_uuid, &buffer);
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR
- "sn_hubdev_add: acpi_get_vendor_resource() failed: %d\n",
- status);
- return 1;
- }
-
- resource = buffer.pointer;
- vendor = &resource->data.vendor_typed;
- if ((vendor->byte_length - sizeof(struct acpi_vendor_uuid)) !=
- sizeof(struct hubdev_info *)) {
- printk(KERN_ERR
- "sn_hubdev_add: Invalid vendor data length: %d\n",
- vendor->byte_length);
- ret = 1;
- goto exit;
- }
-
- memcpy(&addr, vendor->byte_data, sizeof(struct hubdev_info *));
- hubdev_ptr = __va((struct hubdev_info *) addr);
-
- nasid = hubdev_ptr->hdi_nasid;
- i = nasid_to_cnodeid(nasid);
- hubdev = (struct hubdev_info *)(NODEPDA(i)->pdinfo);
- *hubdev = *hubdev_ptr;
- sn_common_hubdev_init(hubdev);
-
-exit:
- kfree(buffer.pointer);
- return ret;
-}
-
-/*
- * sn_get_bussoft_ptr() - The pcibus_bussoft pointer is found in
- * the ACPI Vendor resource for this bus.
- */
-static struct pcibus_bussoft *
-sn_get_bussoft_ptr(struct pci_bus *bus)
-{
- u64 addr;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- acpi_handle handle;
- struct pcibus_bussoft *prom_bussoft_ptr;
- struct acpi_resource *resource;
- acpi_status status;
- struct acpi_resource_vendor_typed *vendor;
-
-
- handle = PCI_CONTROLLER(bus)->acpi_handle;
- status = acpi_get_vendor_resource(handle, METHOD_NAME__CRS,
- &sn_uuid, &buffer);
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR "get_acpi_pcibus_ptr: "
- "get_acpi_bussoft_info() failed: %d\n",
- status);
- return NULL;
- }
- resource = buffer.pointer;
- vendor = &resource->data.vendor_typed;
-
- if ((vendor->byte_length - sizeof(struct acpi_vendor_uuid)) !=
- sizeof(struct pcibus_bussoft *)) {
- printk(KERN_ERR
- "get_acpi_bussoft_ptr: Invalid vendor data "
- "length %d\n", vendor->byte_length);
- kfree(buffer.pointer);
- return NULL;
- }
- memcpy(&addr, vendor->byte_data, sizeof(struct pcibus_bussoft *));
- prom_bussoft_ptr = __va((struct pcibus_bussoft *) addr);
- kfree(buffer.pointer);
-
- return prom_bussoft_ptr;
-}
-
-/*
- * sn_acpi_bus_fixup
- */
-void
-sn_acpi_bus_fixup(struct pci_bus *bus)
-{
- struct pci_dev *pci_dev = NULL;
- struct pcibus_bussoft *prom_bussoft_ptr;
- extern void sn_common_bus_fixup(struct pci_bus *,
- struct pcibus_bussoft *);
-
- if (!bus->parent) { /* If root bus */
- prom_bussoft_ptr = sn_get_bussoft_ptr(bus);
- if (prom_bussoft_ptr == NULL) {
- printk(KERN_ERR
- "sn_pci_fixup_bus: 0x%04x:0x%02x Unable to "
- "obtain prom_bussoft_ptr\n",
- pci_domain_nr(bus), bus->number);
- return;
- }
- sn_common_bus_fixup(bus, prom_bussoft_ptr);
- }
- list_for_each_entry(pci_dev, &bus->devices, bus_list) {
- sn_pci_fixup_slot(pci_dev);
- }
-}
-
-static struct acpi_driver acpi_sn_hubdev_driver = {
- .name = "SGI HUBDEV Driver",
- .ids = "SGIHUB,SGITIO",
- .ops = {
- .add = sn_hubdev_add,
- },
-};
-
-
-/*
- * sn_io_acpi_init - PROM has ACPI support for IO, defining at a minimum the
- * nodes and root buses in the DSDT. As a result, bus scanning
- * will be initiated by the Linux ACPI code.
- */
-
-void __init
-sn_io_acpi_init(void)
-{
- u64 result;
- s64 status;
-
- acpi_bus_register_driver(&acpi_sn_hubdev_driver);
- status = sal_ioif_init(&result);
- if (status || result)
- panic("sal_ioif_init failed: [%lx] %s\n",
- status, ia64_sal_strerror(status));
-}
diff -puN arch/ia64/sn/kernel/io_common.c~revert-gregkh-pci-altix-add-initial-acpi-io-support /dev/null
--- a/arch/ia64/sn/kernel/io_common.c
+++ /dev/null
@@ -1,612 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006 Silicon Graphics, Inc. All rights reserved.
- */
-
-#include <linux/bootmem.h>
-#include <asm/sn/types.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/sn_feature_sets.h>
-#include <asm/sn/geo.h>
-#include <asm/sn/io.h>
-#include <asm/sn/l1.h>
-#include <asm/sn/module.h>
-#include <asm/sn/pcibr_provider.h>
-#include <asm/sn/pcibus_provider_defs.h>
-#include <asm/sn/pcidev.h>
-#include <asm/sn/simulator.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/sn/tioca_provider.h>
-#include <asm/sn/tioce_provider.h>
-#include "xtalk/hubdev.h"
-#include "xtalk/xwidgetdev.h"
-#include <linux/acpi.h>
-#include <asm/sn/sn2/sn_hwperf.h>
-#include <asm/sn/acpi.h>
-
-extern void sn_init_cpei_timer(void);
-extern void register_sn_procfs(void);
-extern void sn_acpi_bus_fixup(struct pci_bus *);
-extern void sn_bus_fixup(struct pci_bus *);
-extern void sn_acpi_slot_fixup(struct pci_dev *, struct pcidev_info *);
-extern void sn_more_slot_fixup(struct pci_dev *, struct pcidev_info *);
-extern void sn_legacy_pci_window_fixup(struct pci_controller *, u64, u64);
-extern void sn_io_acpi_init(void);
-extern void sn_io_init(void);
-
-
-static struct list_head sn_sysdata_list;
-
-/* sysdata list struct */
-struct sysdata_el {
- struct list_head entry;
- void *sysdata;
-};
-
-int sn_ioif_inited; /* SN I/O infrastructure initialized? */
-
-struct sn_pcibus_provider *sn_pci_provider[PCIIO_ASIC_MAX_TYPES]; /* indexed by asic type */
-
-/*
- * Hooks and struct for unsupported pci providers
- */
-
-static dma_addr_t
-sn_default_pci_map(struct pci_dev *pdev, unsigned long paddr, size_t size, int type)
-{
- return 0;
-}
-
-static void
-sn_default_pci_unmap(struct pci_dev *pdev, dma_addr_t addr, int direction)
-{
- return;
-}
-
-static void *
-sn_default_pci_bus_fixup(struct pcibus_bussoft *soft, struct pci_controller *controller)
-{
- return NULL;
-}
-
-static struct sn_pcibus_provider sn_pci_default_provider = {
- .dma_map = sn_default_pci_map,
- .dma_map_consistent = sn_default_pci_map,
- .dma_unmap = sn_default_pci_unmap,
- .bus_fixup = sn_default_pci_bus_fixup,
-};
-
-/*
- * Retrieve the DMA Flush List given nasid, widget, and device.
- * This list is needed to implement the WAR - Flush DMA data on PIO Reads.
- */
-static inline u64
-sal_get_device_dmaflush_list(u64 nasid, u64 widget_num, u64 device_num,
- u64 address)
-{
- struct ia64_sal_retval ret_stuff;
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
-
- SAL_CALL_NOLOCK(ret_stuff,
- (u64) SN_SAL_IOIF_GET_DEVICE_DMAFLUSH_LIST,
- (u64) nasid, (u64) widget_num,
- (u64) device_num, (u64) address, 0, 0, 0);
- return ret_stuff.status;
-}
-
-/*
- * Retrieve the pci device information given the bus and device|function number.
- */
-static inline u64
-sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev,
- u64 sn_irq_info)
-{
- struct ia64_sal_retval ret_stuff;
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
-
- SAL_CALL_NOLOCK(ret_stuff,
- (u64) SN_SAL_IOIF_GET_PCIDEV_INFO,
- (u64) segment, (u64) bus_number, (u64) devfn,
- (u64) pci_dev,
- sn_irq_info, 0, 0);
- return ret_stuff.v0;
-}
-
-/*
- * sn_pcidev_info_get() - Retrieve the pcidev_info struct for the specified
- * device.
- */
-inline struct pcidev_info *
-sn_pcidev_info_get(struct pci_dev *dev)
-{
- struct pcidev_info *pcidev;
-
- list_for_each_entry(pcidev,
- &(SN_PLATFORM_DATA(dev)->pcidev_info), pdi_list) {
- if (pcidev->pdi_linux_pcidev == dev)
- return pcidev;
- }
- return NULL;
-}
-
-/* Older PROM flush WAR
- *
- * 01/16/06 -- This war will be in place until a new official PROM is released.
- * Additionally note that the struct sn_flush_device_war also has to be
- * removed from arch/ia64/sn/include/xtalk/hubdev.h
- */
-static u8 war_implemented = 0;
-
-static s64 sn_device_fixup_war(u64 nasid, u64 widget, int device,
- struct sn_flush_device_common *common)
-{
- struct sn_flush_device_war *war_list;
- struct sn_flush_device_war *dev_entry;
- struct ia64_sal_retval isrv = {0,0,0,0};
-
- if (!war_implemented) {
- printk(KERN_WARNING "PROM version < 4.50 -- implementing old "
- "PROM flush WAR\n");
- war_implemented = 1;
- }
-
- war_list = kzalloc(DEV_PER_WIDGET * sizeof(*war_list), GFP_KERNEL);
- if (!war_list)
- BUG();
-
- SAL_CALL_NOLOCK(isrv, SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST,
- nasid, widget, __pa(war_list), 0, 0, 0 ,0);
- if (isrv.status)
- panic("sn_device_fixup_war failed: %s\n",
- ia64_sal_strerror(isrv.status));
-
- dev_entry = war_list + device;
- memcpy(common,dev_entry, sizeof(*common));
- kfree(war_list);
-
- return isrv.status;
-}
-
-/*
- * sn_common_hubdev_init() - This routine is called to initialize the HUB data
- * structure for each node in the system.
- */
-void __init
-sn_common_hubdev_init(struct hubdev_info *hubdev)
-{
-
- struct sn_flush_device_kernel *sn_flush_device_kernel;
- struct sn_flush_device_kernel *dev_entry;
- s64 status;
- int widget, device, size;
-
- /* Attach the error interrupt handlers */
- if (hubdev->hdi_nasid & 1) /* If TIO */
- ice_error_init(hubdev);
- else
- hub_error_init(hubdev);
-
- for (widget = 0; widget <= HUB_WIDGET_ID_MAX; widget++)
- hubdev->hdi_xwidget_info[widget].xwi_hubinfo = hubdev;
-
- if (!hubdev->hdi_flush_nasid_list.widget_p)
- return;
-
- size = (HUB_WIDGET_ID_MAX + 1) *
- sizeof(struct sn_flush_device_kernel *);
- hubdev->hdi_flush_nasid_list.widget_p =
- kzalloc(size, GFP_KERNEL);
- if (!hubdev->hdi_flush_nasid_list.widget_p)
- BUG();
-
- for (widget = 0; widget <= HUB_WIDGET_ID_MAX; widget++) {
- size = DEV_PER_WIDGET *
- sizeof(struct sn_flush_device_kernel);
- sn_flush_device_kernel = kzalloc(size, GFP_KERNEL);
- if (!sn_flush_device_kernel)
- BUG();
-
- dev_entry = sn_flush_device_kernel;
- for (device = 0; device < DEV_PER_WIDGET;
- device++, dev_entry++) {
- size = sizeof(struct sn_flush_device_common);
- dev_entry->common = kzalloc(size, GFP_KERNEL);
- if (!dev_entry->common)
- BUG();
- if (sn_prom_feature_available(PRF_DEVICE_FLUSH_LIST))
- status = sal_get_device_dmaflush_list(
- hubdev->hdi_nasid, widget, device,
- (u64)(dev_entry->common));
- else
- status = sn_device_fixup_war(hubdev->hdi_nasid,
- widget, device,
- dev_entry->common);
- if (status != SALRET_OK)
- panic("SAL call failed: %s\n",
- ia64_sal_strerror(status));
-
- spin_lock_init(&dev_entry->sfdl_flush_lock);
- }
-
- if (sn_flush_device_kernel)
- hubdev->hdi_flush_nasid_list.widget_p[widget] =
- sn_flush_device_kernel;
- }
-}
-
-void sn_pci_unfixup_slot(struct pci_dev *dev)
-{
- struct pci_dev *host_pci_dev = SN_PCIDEV_INFO(dev)->host_pci_dev;
-
- sn_irq_unfixup(dev);
- pci_dev_put(host_pci_dev);
- pci_dev_put(dev);
-}
-
-/*
- * sn_pci_fixup_slot() - This routine sets up a slot's resources consistent
- * with the Linux PCI abstraction layer. Resources
- * acquired from our PCI provider include PIO maps
- * to BAR space and interrupt objects.
- */
-void sn_pci_fixup_slot(struct pci_dev *dev)
-{
- int segment = pci_domain_nr(dev->bus);
- int status = 0;
- struct pcibus_bussoft *bs;
- struct pci_bus *host_pci_bus;
- struct pci_dev *host_pci_dev;
- struct pcidev_info *pcidev_info;
- struct sn_irq_info *sn_irq_info;
- unsigned int bus_no, devfn;
-
- pci_dev_get(dev); /* for the sysdata pointer */
- pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL);
- if (!pcidev_info)
- BUG(); /* Cannot afford to run out of memory */
-
- sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
- if (!sn_irq_info)
- BUG(); /* Cannot afford to run out of memory */
-
- /* Call to retrieve pci device information needed by kernel. */
- status = sal_get_pcidev_info((u64) segment, (u64) dev->bus->number,
- dev->devfn,
- (u64) __pa(pcidev_info),
- (u64) __pa(sn_irq_info));
- if (status)
- BUG(); /* Cannot get platform pci device information */
-
- /* Add pcidev_info to list in pci_controller.platform_data */
- list_add_tail(&pcidev_info->pdi_list,
- &(SN_PLATFORM_DATA(dev->bus)->pcidev_info));
-
- if (!SN_ACPI_BASE_SUPPORT())
- sn_more_slot_fixup(dev, pcidev_info);
-
- /*
- * Using the PROMs values for the PCI host bus, get the Linux
- * PCI host_pci_dev struct and set up host bus linkages
- */
-
- bus_no = (pcidev_info->pdi_slot_host_handle >> 32) & 0xff;
- devfn = pcidev_info->pdi_slot_host_handle & 0xffffffff;
- host_pci_bus = pci_find_bus(segment, bus_no);
- host_pci_dev = pci_get_slot(host_pci_bus, devfn);
-
- pcidev_info->host_pci_dev = host_pci_dev;
- pcidev_info->pdi_linux_pcidev = dev;
- pcidev_info->pdi_host_pcidev_info = SN_PCIDEV_INFO(host_pci_dev);
- bs = SN_PCIBUS_BUSSOFT(dev->bus);
- pcidev_info->pdi_pcibus_info = bs;
-
- if (bs && bs->bs_asic_type < PCIIO_ASIC_MAX_TYPES) {
- SN_PCIDEV_BUSPROVIDER(dev) = sn_pci_provider[bs->bs_asic_type];
- } else {
- SN_PCIDEV_BUSPROVIDER(dev) = &sn_pci_default_provider;
- }
-
- /* Only set up IRQ stuff if this device has a host bus context */
- if (bs && sn_irq_info->irq_irq) {
- pcidev_info->pdi_sn_irq_info = sn_irq_info;
- dev->irq = pcidev_info->pdi_sn_irq_info->irq_irq;
- sn_irq_fixup(dev, sn_irq_info);
- } else {
- pcidev_info->pdi_sn_irq_info = NULL;
- kfree(sn_irq_info);
- }
-}
-
-/*
- * sn_common_bus_fixup - Perform platform specific bus fixup.
- * Execute the ASIC specific fixup routine
- * for this bus.
- */
-void
-sn_common_bus_fixup(struct pci_bus *bus,
- struct pcibus_bussoft *prom_bussoft_ptr)
-{
- int cnode;
- struct pci_controller *controller;
- struct hubdev_info *hubdev_info;
- int nasid;
- void *provider_soft;
- struct sn_pcibus_provider *provider;
- struct sn_platform_data *sn_platform_data;
-
- controller = PCI_CONTROLLER(bus);
- /*
- * Per-provider fixup. Copies the bus soft structure from prom
- * to local area and links SN_PCIBUS_BUSSOFT().
- */
-
- if (prom_bussoft_ptr->bs_asic_type >= PCIIO_ASIC_MAX_TYPES) {
- printk(KERN_WARNING "sn_common_bus_fixup: Unsupported asic type, %d",
- prom_bussoft_ptr->bs_asic_type);
- return;
- }
-
- if (prom_bussoft_ptr->bs_asic_type == PCIIO_ASIC_TYPE_PPB)
- return; /* no further fixup necessary */
-
- provider = sn_pci_provider[prom_bussoft_ptr->bs_asic_type];
- if (provider == NULL)
- panic("sn_common_bus_fixup: No provider registered for this asic type, %d",
- prom_bussoft_ptr->bs_asic_type);
-
- if (provider->bus_fixup)
- provider_soft = (*provider->bus_fixup) (prom_bussoft_ptr,
- controller);
- else
- provider_soft = NULL;
-
- /*
- * Generic bus fixup goes here. Don't reference prom_bussoft_ptr
- * after this point.
- */
- controller->platform_data = kzalloc(sizeof(struct sn_platform_data),
- GFP_KERNEL);
- if (controller->platform_data == NULL)
- BUG();
- sn_platform_data =
- (struct sn_platform_data *) controller->platform_data;
- sn_platform_data->provider_soft = provider_soft;
- INIT_LIST_HEAD(&((struct sn_platform_data *)
- controller->platform_data)->pcidev_info);
- nasid = NASID_GET(SN_PCIBUS_BUSSOFT(bus)->bs_base);
- cnode = nasid_to_cnodeid(nasid);
- hubdev_info = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo);
- SN_PCIBUS_BUSSOFT(bus)->bs_xwidget_info =
- &(hubdev_info->hdi_xwidget_info[SN_PCIBUS_BUSSOFT(bus)->bs_xid]);
-
- /*
- * If the node information we obtained during the fixup phase is
- * invalid then set controller->node to -1 (undetermined)
- */
- if (controller->node >= num_online_nodes()) {
- struct pcibus_bussoft *b = SN_PCIBUS_BUSSOFT(bus);
-
- printk(KERN_WARNING "Device ASIC=%u XID=%u PBUSNUM=%u"
- "L_IO=%lx L_MEM=%lx BASE=%lx\n",
- b->bs_asic_type, b->bs_xid, b->bs_persist_busnum,
- b->bs_legacy_io, b->bs_legacy_mem, b->bs_base);
- printk(KERN_WARNING "on node %d but only %d nodes online."
- "Association set to undetermined.\n",
- controller->node, num_online_nodes());
- controller->node = -1;
- }
-}
-
-void sn_bus_store_sysdata(struct pci_dev *dev)
-{
- struct sysdata_el *element;
-
- element = kzalloc(sizeof(struct sysdata_el), GFP_KERNEL);
- if (!element) {
- dev_dbg(dev, "%s: out of memory!\n", __FUNCTION__);
- return;
- }
- element->sysdata = SN_PCIDEV_INFO(dev);
- list_add(&element->entry, &sn_sysdata_list);
-}
-
-void sn_bus_free_sysdata(void)
-{
- struct sysdata_el *element;
- struct list_head *list, *safe;
-
- list_for_each_safe(list, safe, &sn_sysdata_list) {
- element = list_entry(list, struct sysdata_el, entry);
- list_del(&element->entry);
- list_del(&(((struct pcidev_info *)
- (element->sysdata))->pdi_list));
- kfree(element->sysdata);
- kfree(element);
- }
- return;
-}
-
-/*
- * hubdev_init_node() - Creates the HUB data structure and link them to it's
- * own NODE specific data area.
- */
-void hubdev_init_node(nodepda_t * npda, cnodeid_t node)
-{
- struct hubdev_info *hubdev_info;
- int size;
- pg_data_t *pg;
-
- size = sizeof(struct hubdev_info);
-
- if (node >= num_online_nodes()) /* Headless/memless IO nodes */
- pg = NODE_DATA(0);
- else
- pg = NODE_DATA(node);
-
- hubdev_info = (struct hubdev_info *)alloc_bootmem_node(pg, size);
-
- npda->pdinfo = (void *)hubdev_info;
-}
-
-geoid_t
-cnodeid_get_geoid(cnodeid_t cnode)
-{
- struct hubdev_info *hubdev;
-
- hubdev = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo);
- return hubdev->hdi_geoid;
-}
-
-void sn_generate_path(struct pci_bus *pci_bus, char *address)
-{
- nasid_t nasid;
- cnodeid_t cnode;
- geoid_t geoid;
- moduleid_t moduleid;
- u16 bricktype;
-
- nasid = NASID_GET(SN_PCIBUS_BUSSOFT(pci_bus)->bs_base);
- cnode = nasid_to_cnodeid(nasid);
- geoid = cnodeid_get_geoid(cnode);
- moduleid = geo_module(geoid);
-
- sprintf(address, "module_%c%c%c%c%.2d",
- '0'+RACK_GET_CLASS(MODULE_GET_RACK(moduleid)),
- '0'+RACK_GET_GROUP(MODULE_GET_RACK(moduleid)),
- '0'+RACK_GET_NUM(MODULE_GET_RACK(moduleid)),
- MODULE_GET_BTCHAR(moduleid), MODULE_GET_BPOS(moduleid));
-
- /* Tollhouse requires slot id to be displayed */
- bricktype = MODULE_GET_BTYPE(moduleid);
- if ((bricktype == L1_BRICKTYPE_191010) ||
- (bricktype == L1_BRICKTYPE_1932))
- sprintf(address, "%s^%d", address, geo_slot(geoid));
-}
-
-/*
- * sn_pci_fixup_bus() - Perform SN specific setup of software structs
- * (pcibus_bussoft, pcidev_info) and hardware
- * registers, for the specified bus and devices under it.
- */
-void __devinit
-sn_pci_fixup_bus(struct pci_bus *bus)
-{
-
- if (SN_ACPI_BASE_SUPPORT())
- sn_acpi_bus_fixup(bus);
- else
- sn_bus_fixup(bus);
-}
-
-/*
- * sn_io_early_init - Perform early IO (and some non-IO) initialization.
- * In particular, setup the sn_pci_provider[] array.
- * This needs to be done prior to any bus scanning
- * (acpi_scan_init()) in the ACPI case, as the SN
- * bus fixup code will reference the array.
- */
-static int __init
-sn_io_early_init(void)
-{
- int i;
-
- if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM())
- return 0;
-
- /*
- * prime sn_pci_provider[]. Individial provider init routines will
- * override their respective default entries.
- */
-
- for (i = 0; i < PCIIO_ASIC_MAX_TYPES; i++)
- sn_pci_provider[i] = &sn_pci_default_provider;
-
- pcibr_init_provider();
- tioca_init_provider();
- tioce_init_provider();
-
- /*
- * This is needed to avoid bounce limit checks in the blk layer
- */
- ia64_max_iommu_merge_mask = ~PAGE_MASK;
-
- sn_irq_lh_init();
- INIT_LIST_HEAD(&sn_sysdata_list);
- sn_init_cpei_timer();
-
-#ifdef CONFIG_PROC_FS
- register_sn_procfs();
-#endif
-
- printk(KERN_INFO "ACPI DSDT OEM Rev 0x%x\n",
- acpi_gbl_DSDT->oem_revision);
- if (SN_ACPI_BASE_SUPPORT())
- sn_io_acpi_init();
- else
- sn_io_init();
- return 0;
-}
-
-arch_initcall(sn_io_early_init);
-
-/*
- * sn_io_late_init() - Perform any final platform specific IO initialization.
- */
-
-int __init
-sn_io_late_init(void)
-{
- struct pci_bus *bus;
- struct pcibus_bussoft *bussoft;
- cnodeid_t cnode;
- nasid_t nasid;
- cnodeid_t near_cnode;
-
- if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM())
- return 0;
-
- /*
- * Setup closest node in pci_controller->node for
- * PIC, TIOCP, TIOCE (TIOCA does it during bus fixup using
- * info from the PROM).
- */
- bus = NULL;
- while ((bus = pci_find_next_bus(bus)) != NULL) {
- bussoft = SN_PCIBUS_BUSSOFT(bus);
- nasid = NASID_GET(bussoft->bs_base);
- cnode = nasid_to_cnodeid(nasid);
- if ((bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCP) ||
- (bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCE)) {
- /* TIO PCI Bridge: find nearest node with CPUs */
- int e = sn_hwperf_get_nearest_node(cnode, NULL,
- &near_cnode);
- if (e < 0) {
- near_cnode = (cnodeid_t)-1; /* use any node */
- printk(KERN_WARNING "pcibr_bus_fixup: failed "
- "to find near node with CPUs to TIO "
- "node %d, err=%d\n", cnode, e);
- }
- PCI_CONTROLLER(bus)->node = near_cnode;
- } else if (bussoft->bs_asic_type == PCIIO_ASIC_TYPE_PIC) {
- PCI_CONTROLLER(bus)->node = cnode;
- }
- }
-
- sn_ioif_inited = 1; /* SN I/O infrastructure now initialized */
-
- return 0;
-}
-
-fs_initcall(sn_io_late_init);
-
-EXPORT_SYMBOL(sn_pci_fixup_slot);
-EXPORT_SYMBOL(sn_pci_unfixup_slot);
-EXPORT_SYMBOL(sn_bus_store_sysdata);
-EXPORT_SYMBOL(sn_bus_free_sysdata);
-EXPORT_SYMBOL(sn_generate_path);
-
diff -puN arch/ia64/sn/kernel/io_init.c~revert-gregkh-pci-altix-add-initial-acpi-io-support arch/ia64/sn/kernel/io_init.c
--- a/arch/ia64/sn/kernel/io_init.c~revert-gregkh-pci-altix-add-initial-acpi-io-support
+++ a/arch/ia64/sn/kernel/io_init.c
@@ -3,28 +3,103 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
*/
+#include <linux/bootmem.h>
+#include <linux/nodemask.h>
#include <asm/sn/types.h>
#include <asm/sn/addrs.h>
+#include <asm/sn/sn_feature_sets.h>
+#include <asm/sn/geo.h>
#include <asm/sn/io.h>
+#include <asm/sn/l1.h>
#include <asm/sn/module.h>
-#include <asm/sn/intr.h>
+#include <asm/sn/pcibr_provider.h>
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/pcidev.h>
+#include <asm/sn/simulator.h>
#include <asm/sn/sn_sal.h>
+#include <asm/sn/tioca_provider.h>
+#include <asm/sn/tioce_provider.h>
#include "xtalk/hubdev.h"
+#include "xtalk/xwidgetdev.h"
-/*
- * The code in this file will only be executed when running with
- * a PROM that does _not_ have base ACPI IO support.
- * (i.e., SN_ACPI_BASE_SUPPORT() == 0)
- */
+
+extern void sn_init_cpei_timer(void);
+extern void register_sn_procfs(void);
+
+static struct list_head sn_sysdata_list;
+
+/* sysdata list struct */
+struct sysdata_el {
+ struct list_head entry;
+ void *sysdata;
+};
+
+struct slab_info {
+ struct hubdev_info hubdev;
+};
+
+struct brick {
+ moduleid_t id; /* Module ID of this module */
+ struct slab_info slab_info[MAX_SLABS + 1];
+};
+
+int sn_ioif_inited; /* SN I/O infrastructure initialized? */
+
+struct sn_pcibus_provider *sn_pci_provider[PCIIO_ASIC_MAX_TYPES]; /* indexed by asic type */
static int max_segment_number; /* Default highest segment number */
static int max_pcibus_number = 255; /* Default highest pci bus number */
+/*
+ * Hooks and struct for unsupported pci providers
+ */
+
+static dma_addr_t
+sn_default_pci_map(struct pci_dev *pdev, unsigned long paddr, size_t size, int type)
+{
+ return 0;
+}
+
+static void
+sn_default_pci_unmap(struct pci_dev *pdev, dma_addr_t addr, int direction)
+{
+ return;
+}
+
+static void *
+sn_default_pci_bus_fixup(struct pcibus_bussoft *soft, struct pci_controller *controller)
+{
+ return NULL;
+}
+
+static struct sn_pcibus_provider sn_pci_default_provider = {
+ .dma_map = sn_default_pci_map,
+ .dma_map_consistent = sn_default_pci_map,
+ .dma_unmap = sn_default_pci_unmap,
+ .bus_fixup = sn_default_pci_bus_fixup,
+};
+
+/*
+ * Retrieve the DMA Flush List given nasid, widget, and device.
+ * This list is needed to implement the WAR - Flush DMA data on PIO Reads.
+ */
+static inline u64
+sal_get_device_dmaflush_list(u64 nasid, u64 widget_num, u64 device_num,
+ u64 address)
+{
+ struct ia64_sal_retval ret_stuff;
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+
+ SAL_CALL_NOLOCK(ret_stuff,
+ (u64) SN_SAL_IOIF_GET_DEVICE_DMAFLUSH_LIST,
+ (u64) nasid, (u64) widget_num,
+ (u64) device_num, (u64) address, 0, 0, 0);
+ return ret_stuff.status;
+}
/*
* Retrieve the hub device info structure for the given nasid.
@@ -56,20 +131,93 @@ static inline u64 sal_get_pcibus_info(u6
return ret_stuff.v0;
}
+/*
+ * Retrieve the pci device information given the bus and device|function number.
+ */
+static inline u64
+sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev,
+ u64 sn_irq_info)
+{
+ struct ia64_sal_retval ret_stuff;
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+
+ SAL_CALL_NOLOCK(ret_stuff,
+ (u64) SN_SAL_IOIF_GET_PCIDEV_INFO,
+ (u64) segment, (u64) bus_number, (u64) devfn,
+ (u64) pci_dev,
+ sn_irq_info, 0, 0);
+ return ret_stuff.v0;
+}
+
+/*
+ * sn_pcidev_info_get() - Retrieve the pcidev_info struct for the specified
+ * device.
+ */
+inline struct pcidev_info *
+sn_pcidev_info_get(struct pci_dev *dev)
+{
+ struct pcidev_info *pcidev;
+
+ list_for_each_entry(pcidev,
+ &(SN_PCI_CONTROLLER(dev)->pcidev_info), pdi_list) {
+ if (pcidev->pdi_linux_pcidev == dev) {
+ return pcidev;
+ }
+ }
+ return NULL;
+}
+
+/* Older PROM flush WAR
+ *
+ * 01/16/06 -- This war will be in place until a new official PROM is released.
+ * Additionally note that the struct sn_flush_device_war also has to be
+ * removed from arch/ia64/sn/include/xtalk/hubdev.h
+ */
+static u8 war_implemented = 0;
+
+static s64 sn_device_fixup_war(u64 nasid, u64 widget, int device,
+ struct sn_flush_device_common *common)
+{
+ struct sn_flush_device_war *war_list;
+ struct sn_flush_device_war *dev_entry;
+ struct ia64_sal_retval isrv = {0,0,0,0};
+
+ if (!war_implemented) {
+ printk(KERN_WARNING "PROM version < 4.50 -- implementing old "
+ "PROM flush WAR\n");
+ war_implemented = 1;
+ }
+
+ war_list = kzalloc(DEV_PER_WIDGET * sizeof(*war_list), GFP_KERNEL);
+ if (!war_list)
+ BUG();
+
+ SAL_CALL_NOLOCK(isrv, SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST,
+ nasid, widget, __pa(war_list), 0, 0, 0 ,0);
+ if (isrv.status)
+ panic("sn_device_fixup_war failed: %s\n",
+ ia64_sal_strerror(isrv.status));
+
+ dev_entry = war_list + device;
+ memcpy(common,dev_entry, sizeof(*common));
+ kfree(war_list);
+
+ return isrv.status;
+}
/*
- * sn_fixup_ionodes() - This routine initializes the HUB data structure for
- * each node in the system. This function is only
- * executed when running with a non-ACPI capable PROM.
+ * sn_fixup_ionodes() - This routine initializes the HUB data strcuture for
+ * each node in the system.
*/
static void __init sn_fixup_ionodes(void)
{
-
+ struct sn_flush_device_kernel *sn_flush_device_kernel;
+ struct sn_flush_device_kernel *dev_entry;
struct hubdev_info *hubdev;
u64 status;
u64 nasid;
- int i;
- extern void sn_common_hubdev_init(struct hubdev_info *);
+ int i, widget, device, size;
/*
* Get SGI Specific HUB chipset information.
@@ -92,47 +240,70 @@ static void __init sn_fixup_ionodes(void
max_segment_number = hubdev->max_segment_number;
max_pcibus_number = hubdev->max_pcibus_number;
}
- sn_common_hubdev_init(hubdev);
- }
-}
-/*
- * sn_pci_legacy_window_fixup - Create PCI controller windows for
- * legacy IO and MEM space. This needs to
- * be done here, as the PROM does not have
- * ACPI support defining the root buses
- * and their resources (_CRS),
- */
-static void
-sn_legacy_pci_window_fixup(struct pci_controller *controller,
- u64 legacy_io, u64 legacy_mem)
-{
- controller->window = kcalloc(2, sizeof(struct pci_window),
- GFP_KERNEL);
- if (controller->window == NULL)
+ /* Attach the error interrupt handlers */
+ if (nasid & 1)
+ ice_error_init(hubdev);
+ else
+ hub_error_init(hubdev);
+
+ for (widget = 0; widget <= HUB_WIDGET_ID_MAX; widget++)
+ hubdev->hdi_xwidget_info[widget].xwi_hubinfo = hubdev;
+
+ if (!hubdev->hdi_flush_nasid_list.widget_p)
+ continue;
+
+ size = (HUB_WIDGET_ID_MAX + 1) *
+ sizeof(struct sn_flush_device_kernel *);
+ hubdev->hdi_flush_nasid_list.widget_p =
+ kzalloc(size, GFP_KERNEL);
+ if (!hubdev->hdi_flush_nasid_list.widget_p)
BUG();
- controller->window[0].offset = legacy_io;
- controller->window[0].resource.name = "legacy_io";
- controller->window[0].resource.flags = IORESOURCE_IO;
- controller->window[0].resource.start = legacy_io;
- controller->window[0].resource.end =
- controller->window[0].resource.start + 0xffff;
- controller->window[0].resource.parent = &ioport_resource;
- controller->window[1].offset = legacy_mem;
- controller->window[1].resource.name = "legacy_mem";
- controller->window[1].resource.flags = IORESOURCE_MEM;
- controller->window[1].resource.start = legacy_mem;
- controller->window[1].resource.end =
- controller->window[1].resource.start + (1024 * 1024) - 1;
- controller->window[1].resource.parent = &iomem_resource;
- controller->windows = 2;
+
+ for (widget = 0; widget <= HUB_WIDGET_ID_MAX; widget++) {
+ size = DEV_PER_WIDGET *
+ sizeof(struct sn_flush_device_kernel);
+ sn_flush_device_kernel = kzalloc(size, GFP_KERNEL);
+ if (!sn_flush_device_kernel)
+ BUG();
+
+ dev_entry = sn_flush_device_kernel;
+ for (device = 0; device < DEV_PER_WIDGET;
+ device++,dev_entry++) {
+ size = sizeof(struct sn_flush_device_common);
+ dev_entry->common = kzalloc(size, GFP_KERNEL);
+ if (!dev_entry->common)
+ BUG();
+
+ if (sn_prom_feature_available(
+ PRF_DEVICE_FLUSH_LIST))
+ status = sal_get_device_dmaflush_list(
+ nasid, widget, device,
+ (u64)(dev_entry->common));
+ else
+ status = sn_device_fixup_war(nasid,
+ widget, device,
+ dev_entry->common);
+ if (status != SALRET_OK)
+ panic("SAL call failed: %s\n",
+ ia64_sal_strerror(status));
+
+ spin_lock_init(&dev_entry->sfdl_flush_lock);
+ }
+
+ if (sn_flush_device_kernel)
+ hubdev->hdi_flush_nasid_list.widget_p[widget] =
+ sn_flush_device_kernel;
+ }
+ }
}
/*
* sn_pci_window_fixup() - Create a pci_window for each device resource.
- * It will setup pci_windows for use by
- * pcibios_bus_to_resource(), pcibios_resource_to_bus(),
- * etc.
+ * Until ACPI support is added, we need this code
+ * to setup pci_windows for use by
+ * pcibios_bus_to_resource(),
+ * pcibios_resource_to_bus(), etc.
*/
static void
sn_pci_window_fixup(struct pci_dev *dev, unsigned int count,
@@ -171,22 +342,60 @@ sn_pci_window_fixup(struct pci_dev *dev,
controller->window = new_window;
}
+void sn_pci_unfixup_slot(struct pci_dev *dev)
+{
+ struct pci_dev *host_pci_dev = SN_PCIDEV_INFO(dev)->host_pci_dev;
+
+ sn_irq_unfixup(dev);
+ pci_dev_put(host_pci_dev);
+ pci_dev_put(dev);
+}
+
/*
- * sn_more_slot_fixup() - We are not running with an ACPI capable PROM,
- * and need to convert the pci_dev->resource
- * 'start' and 'end' addresses to mapped addresses,
- * and setup the pci_controller->window array entries.
+ * sn_pci_fixup_slot() - This routine sets up a slot's resources
+ * consistent with the Linux PCI abstraction layer. Resources acquired
+ * from our PCI provider include PIO maps to BAR space and interrupt
+ * objects.
*/
-void
-sn_more_slot_fixup(struct pci_dev *dev, struct pcidev_info *pcidev_info)
+void sn_pci_fixup_slot(struct pci_dev *dev)
{
unsigned int count = 0;
int idx;
+ int segment = pci_domain_nr(dev->bus);
+ int status = 0;
+ struct pcibus_bussoft *bs;
+ struct pci_bus *host_pci_bus;
+ struct pci_dev *host_pci_dev;
+ struct pcidev_info *pcidev_info;
s64 pci_addrs[PCI_ROM_RESOURCE + 1];
- unsigned long addr, end, size, start;
+ struct sn_irq_info *sn_irq_info;
+ unsigned long size;
+ unsigned int bus_no, devfn;
+
+ pci_dev_get(dev); /* for the sysdata pointer */
+ pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL);
+ if (!pcidev_info)
+ BUG(); /* Cannot afford to run out of memory */
+
+ sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
+ if (!sn_irq_info)
+ BUG(); /* Cannot afford to run out of memory */
+
+ /* Call to retrieve pci device information needed by kernel. */
+ status = sal_get_pcidev_info((u64) segment, (u64) dev->bus->number,
+ dev->devfn,
+ (u64) __pa(pcidev_info),
+ (u64) __pa(sn_irq_info));
+ if (status)
+ BUG(); /* Cannot get platform pci device information */
+
+ /* Add pcidev_info to list in sn_pci_controller struct */
+ list_add_tail(&pcidev_info->pdi_list,
+ &(SN_PCI_CONTROLLER(dev->bus)->pcidev_info));
/* Copy over PIO Mapped Addresses */
for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
+ unsigned long start, end, addr;
if (!pcidev_info->pdi_pio_mapped_addr[idx]) {
pci_addrs[idx] = -1;
@@ -216,19 +425,54 @@ sn_more_slot_fixup(struct pci_dev *dev,
*/
if (count > 0)
sn_pci_window_fixup(dev, count, pci_addrs);
+
+ /*
+ * Using the PROMs values for the PCI host bus, get the Linux
+ * PCI host_pci_dev struct and set up host bus linkages
+ */
+
+ bus_no = (pcidev_info->pdi_slot_host_handle >> 32) & 0xff;
+ devfn = pcidev_info->pdi_slot_host_handle & 0xffffffff;
+ host_pci_bus = pci_find_bus(segment, bus_no);
+ host_pci_dev = pci_get_slot(host_pci_bus, devfn);
+
+ pcidev_info->host_pci_dev = host_pci_dev;
+ pcidev_info->pdi_linux_pcidev = dev;
+ pcidev_info->pdi_host_pcidev_info = SN_PCIDEV_INFO(host_pci_dev);
+ bs = SN_PCIBUS_BUSSOFT(dev->bus);
+ pcidev_info->pdi_pcibus_info = bs;
+
+ if (bs && bs->bs_asic_type < PCIIO_ASIC_MAX_TYPES) {
+ SN_PCIDEV_BUSPROVIDER(dev) = sn_pci_provider[bs->bs_asic_type];
+ } else {
+ SN_PCIDEV_BUSPROVIDER(dev) = &sn_pci_default_provider;
+ }
+
+ /* Only set up IRQ stuff if this device has a host bus context */
+ if (bs && sn_irq_info->irq_irq) {
+ pcidev_info->pdi_sn_irq_info = sn_irq_info;
+ dev->irq = pcidev_info->pdi_sn_irq_info->irq_irq;
+ sn_irq_fixup(dev, sn_irq_info);
+ } else {
+ pcidev_info->pdi_sn_irq_info = NULL;
+ kfree(sn_irq_info);
+ }
}
/*
* sn_pci_controller_fixup() - This routine sets up a bus's resources
- * consistent with the Linux PCI abstraction layer.
+ * consistent with the Linux PCI abstraction layer.
*/
-static void
-sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
+void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
{
- s64 status = 0;
+ int status;
+ int nasid, cnode;
struct pci_controller *controller;
+ struct sn_pci_controller *sn_controller;
struct pcibus_bussoft *prom_bussoft_ptr;
-
+ struct hubdev_info *hubdev_info;
+ void *provider_soft;
+ struct sn_pcibus_provider *provider;
status = sal_get_pcibus_info((u64) segment, (u64) busnum,
(u64) ia64_tpa(&prom_bussoft_ptr));
@@ -236,77 +480,261 @@ sn_pci_controller_fixup(int segment, int
return; /*bus # does not exist */
prom_bussoft_ptr = __va(prom_bussoft_ptr);
- controller = kzalloc(sizeof(*controller), GFP_KERNEL);
- if (!controller)
+ /* Allocate a sn_pci_controller, which has a pci_controller struct
+ * as the first member.
+ */
+ sn_controller = kzalloc(sizeof(struct sn_pci_controller), GFP_KERNEL);
+ if (!sn_controller)
BUG();
+ INIT_LIST_HEAD(&sn_controller->pcidev_info);
+ controller = &sn_controller->pci_controller;
controller->segment = segment;
+ if (bus == NULL) {
+ bus = pci_scan_bus(busnum, &pci_root_ops, controller);
+ if (bus == NULL)
+ goto error_return; /* error, or bus already scanned */
+ bus->sysdata = NULL;
+ }
+
+ if (bus->sysdata)
+ goto error_return; /* sysdata already alloc'd */
+
/*
- * Temporarily save the prom_bussoft_ptr for use by sn_bus_fixup().
- * (platform_data will be overwritten later in sn_common_bus_fixup())
+ * Per-provider fixup. Copies the contents from prom to local
+ * area and links SN_PCIBUS_BUSSOFT().
*/
- controller->platform_data = prom_bussoft_ptr;
- bus = pci_scan_bus(busnum, &pci_root_ops, controller);
- if (bus == NULL)
- goto error_return; /* error, or bus already scanned */
+ if (prom_bussoft_ptr->bs_asic_type >= PCIIO_ASIC_MAX_TYPES)
+ goto error_return; /* unsupported asic type */
+
+ if (prom_bussoft_ptr->bs_asic_type == PCIIO_ASIC_TYPE_PPB)
+ goto error_return; /* no further fixup necessary */
+
+ provider = sn_pci_provider[prom_bussoft_ptr->bs_asic_type];
+ if (provider == NULL)
+ goto error_return; /* no provider registerd for this asic */
bus->sysdata = controller;
+ if (provider->bus_fixup)
+ provider_soft = (*provider->bus_fixup) (prom_bussoft_ptr, controller);
+ else
+ provider_soft = NULL;
+
+ if (provider_soft == NULL) {
+ /* fixup failed or not applicable */
+ bus->sysdata = NULL;
+ goto error_return;
+ }
+
+ /*
+ * Setup pci_windows for legacy IO and MEM space.
+ * (Temporary until ACPI support is in place.)
+ */
+ controller->window = kcalloc(2, sizeof(struct pci_window), GFP_KERNEL);
+ if (controller->window == NULL)
+ BUG();
+ controller->window[0].offset = prom_bussoft_ptr->bs_legacy_io;
+ controller->window[0].resource.name = "legacy_io";
+ controller->window[0].resource.flags = IORESOURCE_IO;
+ controller->window[0].resource.start = prom_bussoft_ptr->bs_legacy_io;
+ controller->window[0].resource.end =
+ controller->window[0].resource.start + 0xffff;
+ controller->window[0].resource.parent = &ioport_resource;
+ controller->window[1].offset = prom_bussoft_ptr->bs_legacy_mem;
+ controller->window[1].resource.name = "legacy_mem";
+ controller->window[1].resource.flags = IORESOURCE_MEM;
+ controller->window[1].resource.start = prom_bussoft_ptr->bs_legacy_mem;
+ controller->window[1].resource.end =
+ controller->window[1].resource.start + (1024 * 1024) - 1;
+ controller->window[1].resource.parent = &iomem_resource;
+ controller->windows = 2;
+
+ /*
+ * Generic bus fixup goes here. Don't reference prom_bussoft_ptr
+ * after this point.
+ */
+
+ PCI_CONTROLLER(bus)->platform_data = provider_soft;
+ nasid = NASID_GET(SN_PCIBUS_BUSSOFT(bus)->bs_base);
+ cnode = nasid_to_cnodeid(nasid);
+ hubdev_info = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo);
+ SN_PCIBUS_BUSSOFT(bus)->bs_xwidget_info =
+ &(hubdev_info->hdi_xwidget_info[SN_PCIBUS_BUSSOFT(bus)->bs_xid]);
+
+ /*
+ * If the node information we obtained during the fixup phase is invalid
+ * then set controller->node to -1 (undetermined)
+ */
+ if (controller->node >= num_online_nodes()) {
+ struct pcibus_bussoft *b = SN_PCIBUS_BUSSOFT(bus);
+ printk(KERN_WARNING "Device ASIC=%u XID=%u PBUSNUM=%u"
+ "L_IO=%lx L_MEM=%lx BASE=%lx\n",
+ b->bs_asic_type, b->bs_xid, b->bs_persist_busnum,
+ b->bs_legacy_io, b->bs_legacy_mem, b->bs_base);
+ printk(KERN_WARNING "on node %d but only %d nodes online."
+ "Association set to undetermined.\n",
+ controller->node, num_online_nodes());
+ controller->node = -1;
+ }
return;
error_return:
- kfree(controller);
+ kfree(sn_controller);
return;
}
-/*
- * sn_bus_fixup
- */
-void
-sn_bus_fixup(struct pci_bus *bus)
+void sn_bus_store_sysdata(struct pci_dev *dev)
{
- struct pci_dev *pci_dev = NULL;
- struct pcibus_bussoft *prom_bussoft_ptr;
- extern void sn_common_bus_fixup(struct pci_bus *,
- struct pcibus_bussoft *);
+ struct sysdata_el *element;
+ element = kzalloc(sizeof(struct sysdata_el), GFP_KERNEL);
+ if (!element) {
+ dev_dbg(dev, "%s: out of memory!\n", __FUNCTION__);
+ return;
+ }
+ element->sysdata = SN_PCIDEV_INFO(dev);
+ list_add(&element->entry, &sn_sysdata_list);
+}
- if (!bus->parent) { /* If root bus */
- prom_bussoft_ptr = PCI_CONTROLLER(bus)->platform_data;
- if (prom_bussoft_ptr == NULL) {
- printk(KERN_ERR
- "sn_bus_fixup: 0x%04x:0x%02x Unable to "
- "obtain prom_bussoft_ptr\n",
- pci_domain_nr(bus), bus->number);
- return;
- }
- sn_common_bus_fixup(bus, prom_bussoft_ptr);
- sn_legacy_pci_window_fixup(PCI_CONTROLLER(bus),
- prom_bussoft_ptr->bs_legacy_io,
- prom_bussoft_ptr->bs_legacy_mem);
- }
- list_for_each_entry(pci_dev, &bus->devices, bus_list) {
- sn_pci_fixup_slot(pci_dev);
- }
+void sn_bus_free_sysdata(void)
+{
+ struct sysdata_el *element;
+ struct list_head *list, *safe;
+ list_for_each_safe(list, safe, &sn_sysdata_list) {
+ element = list_entry(list, struct sysdata_el, entry);
+ list_del(&element->entry);
+ list_del(&(((struct pcidev_info *)
+ (element->sysdata))->pdi_list));
+ kfree(element->sysdata);
+ kfree(element);
+ }
+ return;
}
/*
- * sn_io_init - PROM does not have ACPI support to define nodes or root buses,
- * so we need to do things the hard way, including initiating the
- * bus scanning ourselves.
+ * Ugly hack to get PCI setup until we have a proper ACPI namespace.
*/
-void __init sn_io_init(void)
+#define PCI_BUSES_TO_SCAN 256
+
+static int __init sn_pci_init(void)
{
int i, j;
+ struct pci_dev *pci_dev = NULL;
+
+ if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM())
+ return 0;
+
+ /*
+ * prime sn_pci_provider[]. Individial provider init routines will
+ * override their respective default entries.
+ */
+
+ for (i = 0; i < PCIIO_ASIC_MAX_TYPES; i++)
+ sn_pci_provider[i] = &sn_pci_default_provider;
+ pcibr_init_provider();
+ tioca_init_provider();
+ tioce_init_provider();
+
+ /*
+ * This is needed to avoid bounce limit checks in the blk layer
+ */
+ ia64_max_iommu_merge_mask = ~PAGE_MASK;
sn_fixup_ionodes();
+ sn_irq_lh_init();
+ INIT_LIST_HEAD(&sn_sysdata_list);
+ sn_init_cpei_timer();
+
+#ifdef CONFIG_PROC_FS
+ register_sn_procfs();
+#endif
/* busses are not known yet ... */
for (i = 0; i <= max_segment_number; i++)
for (j = 0; j <= max_pcibus_number; j++)
sn_pci_controller_fixup(i, j, NULL);
+
+ /*
+ * Generic Linux PCI Layer has created the pci_bus and pci_dev
+ * structures - time for us to add our SN PLatform specific
+ * information.
+ */
+
+ while ((pci_dev =
+ pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pci_dev)) != NULL)
+ sn_pci_fixup_slot(pci_dev);
+
+ sn_ioif_inited = 1; /* sn I/O infrastructure now initialized */
+
+ return 0;
}
+
+/*
+ * hubdev_init_node() - Creates the HUB data structure and link them to it's
+ * own NODE specific data area.
+ */
+void hubdev_init_node(nodepda_t * npda, cnodeid_t node)
+{
+ struct hubdev_info *hubdev_info;
+ int size;
+ pg_data_t *pg;
+
+ size = sizeof(struct hubdev_info);
+
+ if (node >= num_online_nodes()) /* Headless/memless IO nodes */
+ pg = NODE_DATA(0);
+ else
+ pg = NODE_DATA(node);
+
+ hubdev_info = (struct hubdev_info *)alloc_bootmem_node(pg, size);
+
+ npda->pdinfo = (void *)hubdev_info;
+}
+
+geoid_t
+cnodeid_get_geoid(cnodeid_t cnode)
+{
+ struct hubdev_info *hubdev;
+
+ hubdev = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo);
+ return hubdev->hdi_geoid;
+}
+
+void sn_generate_path(struct pci_bus *pci_bus, char *address)
+{
+ nasid_t nasid;
+ cnodeid_t cnode;
+ geoid_t geoid;
+ moduleid_t moduleid;
+ u16 bricktype;
+
+ nasid = NASID_GET(SN_PCIBUS_BUSSOFT(pci_bus)->bs_base);
+ cnode = nasid_to_cnodeid(nasid);
+ geoid = cnodeid_get_geoid(cnode);
+ moduleid = geo_module(geoid);
+
+ sprintf(address, "module_%c%c%c%c%.2d",
+ '0'+RACK_GET_CLASS(MODULE_GET_RACK(moduleid)),
+ '0'+RACK_GET_GROUP(MODULE_GET_RACK(moduleid)),
+ '0'+RACK_GET_NUM(MODULE_GET_RACK(moduleid)),
+ MODULE_GET_BTCHAR(moduleid), MODULE_GET_BPOS(moduleid));
+
+ /* Tollhouse requires slot id to be displayed */
+ bricktype = MODULE_GET_BTYPE(moduleid);
+ if ((bricktype == L1_BRICKTYPE_191010) ||
+ (bricktype == L1_BRICKTYPE_1932))
+ sprintf(address, "%s^%d", address, geo_slot(geoid));
+}
+
+subsys_initcall(sn_pci_init);
+EXPORT_SYMBOL(sn_pci_fixup_slot);
+EXPORT_SYMBOL(sn_pci_unfixup_slot);
+EXPORT_SYMBOL(sn_pci_controller_fixup);
+EXPORT_SYMBOL(sn_bus_store_sysdata);
+EXPORT_SYMBOL(sn_bus_free_sysdata);
+EXPORT_SYMBOL(sn_generate_path);
diff -puN arch/ia64/sn/kernel/iomv.c~revert-gregkh-pci-altix-add-initial-acpi-io-support arch/ia64/sn/kernel/iomv.c
--- a/arch/ia64/sn/kernel/iomv.c~revert-gregkh-pci-altix-add-initial-acpi-io-support
+++ a/arch/ia64/sn/kernel/iomv.c
@@ -3,11 +3,10 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2000-2003, 2006 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2000-2003 Silicon Graphics, Inc. All rights reserved.
*/
#include <linux/module.h>
-#include <linux/acpi.h>
#include <asm/io.h>
#include <asm/delay.h>
#include <asm/vga.h>
@@ -16,7 +15,6 @@
#include <asm/sn/pda.h>
#include <asm/sn/sn_cpuid.h>
#include <asm/sn/shub_mmr.h>
-#include <asm/sn/acpi.h>
#define IS_LEGACY_VGA_IOPORT(p) \
(((p) >= 0x3b0 && (p) <= 0x3bb) || ((p) >= 0x3c0 && (p) <= 0x3df))
@@ -33,14 +31,11 @@ void *sn_io_addr(unsigned long port)
{
if (!IS_RUNNING_ON_SIMULATOR()) {
if (IS_LEGACY_VGA_IOPORT(port))
- return (__ia64_mk_io_addr(port));
+ port += vga_console_iobase;
/* On sn2, legacy I/O ports don't point at anything */
if (port < (64 * 1024))
return NULL;
- if (SN_ACPI_BASE_SUPPORT())
- return (__ia64_mk_io_addr(port));
- else
- return ((void *)(port | __IA64_UNCACHED_OFFSET));
+ return ((void *)(port | __IA64_UNCACHED_OFFSET));
} else {
/* but the simulator uses them... */
unsigned long addr;
diff -puN arch/ia64/sn/kernel/setup.c~revert-gregkh-pci-altix-add-initial-acpi-io-support arch/ia64/sn/kernel/setup.c
--- a/arch/ia64/sn/kernel/setup.c~revert-gregkh-pci-altix-add-initial-acpi-io-support
+++ a/arch/ia64/sn/kernel/setup.c
@@ -389,14 +389,6 @@ void __init sn_setup(char **cmdline_p)
ia64_sn_plat_set_error_handling_features(); // obsolete
ia64_sn_set_os_feature(OSF_MCA_SLV_TO_OS_INIT_SLV);
ia64_sn_set_os_feature(OSF_FEAT_LOG_SBES);
- /*
- * Note: The calls to notify the PROM of ACPI and PCI Segment
- * support must be done prior to acpi_load_tables(), as
- * an ACPI capable PROM will rebuild the DSDT as result
- * of the call.
- */
- ia64_sn_set_os_feature(OSF_PCISEGMENT_ENABLE);
- ia64_sn_set_os_feature(OSF_ACPI_ENABLE);
#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
@@ -422,16 +414,6 @@ void __init sn_setup(char **cmdline_p)
if (! vga_console_membase)
sn_scan_pcdp();
- /*
- * Setup legacy IO space.
- * vga_console_iobase maps to PCI IO Space address 0 on the
- * bus containing the VGA console.
- */
- if (vga_console_iobase) {
- io_space[0].mmio_base = vga_console_iobase;
- io_space[0].sparse = 0;
- }
-
if (vga_console_membase) {
/* usable vga ... make tty0 the preferred default console */
if (!strstr(*cmdline_p, "console="))
diff -puN arch/ia64/sn/kernel/tiocx.c~revert-gregkh-pci-altix-add-initial-acpi-io-support arch/ia64/sn/kernel/tiocx.c
--- a/arch/ia64/sn/kernel/tiocx.c~revert-gregkh-pci-altix-add-initial-acpi-io-support
+++ a/arch/ia64/sn/kernel/tiocx.c
@@ -552,7 +552,7 @@ static void __exit tiocx_exit(void)
bus_unregister(&tiocx_bus_type);
}
-fs_initcall(tiocx_init);
+subsys_initcall(tiocx_init);
module_exit(tiocx_exit);
/************************************************************************
diff -puN arch/ia64/sn/pci/pcibr/pcibr_provider.c~revert-gregkh-pci-altix-add-initial-acpi-io-support arch/ia64/sn/pci/pcibr/pcibr_provider.c
--- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c~revert-gregkh-pci-altix-add-initial-acpi-io-support
+++ a/arch/ia64/sn/pci/pcibr/pcibr_provider.c
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2001-2004, 2006 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2001-2004 Silicon Graphics, Inc. All rights reserved.
*/
#include <linux/interrupt.h>
@@ -109,6 +109,7 @@ void *
pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller)
{
int nasid, cnode, j;
+ cnodeid_t near_cnode;
struct hubdev_info *hubdev_info;
struct pcibus_info *soft;
struct sn_flush_device_kernel *sn_flush_device_kernel;
@@ -185,6 +186,20 @@ pcibr_bus_fixup(struct pcibus_bussoft *p
return NULL;
}
+ if (prom_bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCP) {
+ /* TIO PCI Bridge: find nearest node with CPUs */
+ int e = sn_hwperf_get_nearest_node(cnode, NULL, &near_cnode);
+
+ if (e < 0) {
+ near_cnode = (cnodeid_t)-1; /* use any node */
+ printk(KERN_WARNING "pcibr_bus_fixup: failed to find "
+ "near node with CPUs to TIO node %d, err=%d\n",
+ cnode, e);
+ }
+ controller->node = near_cnode;
+ }
+ else
+ controller->node = cnode;
return soft;
}
diff -puN arch/ia64/sn/pci/tioce_provider.c~revert-gregkh-pci-altix-add-initial-acpi-io-support arch/ia64/sn/pci/tioce_provider.c
--- a/arch/ia64/sn/pci/tioce_provider.c~revert-gregkh-pci-altix-add-initial-acpi-io-support
+++ a/arch/ia64/sn/pci/tioce_provider.c
@@ -15,6 +15,7 @@
#include <asm/sn/pcidev.h>
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/tioce_provider.h>
+#include <asm/sn/sn2/sn_hwperf.h>
/*
* 1/26/2006
@@ -990,6 +991,8 @@ tioce_target_interrupt(struct sn_irq_inf
static void *
tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller)
{
+ int my_nasid;
+ cnodeid_t my_cnode, mem_cnode;
struct tioce_common *tioce_common;
struct tioce_kernel *tioce_kern;
struct tioce *tioce_mmr;
@@ -1033,6 +1036,21 @@ tioce_bus_fixup(struct pcibus_bussoft *p
tioce_common->ce_pcibus.bs_persist_segment,
tioce_common->ce_pcibus.bs_persist_busnum);
+ /*
+ * identify closest nasid for memory allocations
+ */
+
+ my_nasid = NASID_GET(tioce_common->ce_pcibus.bs_base);
+ my_cnode = nasid_to_cnodeid(my_nasid);
+
+ if (sn_hwperf_get_nearest_node(my_cnode, &mem_cnode, NULL) < 0) {
+ printk(KERN_WARNING "tioce_bus_fixup: failed to find "
+ "closest node with MEM to TIO node %d\n", my_cnode);
+ mem_cnode = (cnodeid_t)-1; /* use any node */
+ }
+
+ controller->node = mem_cnode;
+
return tioce_common;
}
diff -puN include/asm-ia64/io.h~revert-gregkh-pci-altix-add-initial-acpi-io-support include/asm-ia64/io.h
--- a/include/asm-ia64/io.h~revert-gregkh-pci-altix-add-initial-acpi-io-support
+++ a/include/asm-ia64/io.h
@@ -32,7 +32,7 @@
*/
#define IO_SPACE_LIMIT 0xffffffffffffffffUL
-#define MAX_IO_SPACES_BITS 8
+#define MAX_IO_SPACES_BITS 4
#define MAX_IO_SPACES (1UL << MAX_IO_SPACES_BITS)
#define IO_SPACE_BITS 24
#define IO_SPACE_SIZE (1UL << IO_SPACE_BITS)
diff -puN include/asm-ia64/machvec.h~revert-gregkh-pci-altix-add-initial-acpi-io-support include/asm-ia64/machvec.h
--- a/include/asm-ia64/machvec.h~revert-gregkh-pci-altix-add-initial-acpi-io-support
+++ a/include/asm-ia64/machvec.h
@@ -35,7 +35,6 @@ typedef int ia64_mv_pci_legacy_read_t (s
typedef int ia64_mv_pci_legacy_write_t (struct pci_bus *, u16 port, u32 val,
u8 size);
typedef void ia64_mv_migrate_t(struct task_struct * task);
-typedef void ia64_mv_pci_fixup_bus_t (struct pci_bus *);
/* DMA-mapping interface: */
typedef void ia64_mv_dma_init (void);
@@ -93,11 +92,6 @@ machvec_noop_task (struct task_struct *t
{
}
-static inline void
-machvec_noop_bus (struct pci_bus *bus)
-{
-}
-
extern void machvec_setup (char **);
extern void machvec_timer_interrupt (int, void *, struct pt_regs *);
extern void machvec_dma_sync_single (struct device *, dma_addr_t, size_t, int);
@@ -161,7 +155,6 @@ extern void machvec_tlb_migrate_finish (
# define platform_readq_relaxed ia64_mv.readq_relaxed
# define platform_migrate ia64_mv.migrate
# define platform_msi_init ia64_mv.msi_init
-# define platform_pci_fixup_bus ia64_mv.pci_fixup_bus
# endif
/* __attribute__((__aligned__(16))) is required to make size of the
@@ -212,7 +205,6 @@ struct ia64_machine_vector {
ia64_mv_readq_relaxed_t *readq_relaxed;
ia64_mv_migrate_t *migrate;
ia64_mv_msi_init_t *msi_init;
- ia64_mv_pci_fixup_bus_t *pci_fixup_bus;
} __attribute__((__aligned__(16))); /* align attrib? see above comment */
#define MACHVEC_INIT(name) \
@@ -259,7 +251,6 @@ struct ia64_machine_vector {
platform_readq_relaxed, \
platform_migrate, \
platform_msi_init, \
- platform_pci_fixup_bus, \
}
extern struct ia64_machine_vector ia64_mv;
@@ -416,8 +407,5 @@ extern int ia64_pci_legacy_write(struct
#ifndef platform_msi_init
# define platform_msi_init ((ia64_mv_msi_init_t*)NULL)
#endif
-#ifndef platform_pci_fixup_bus
-# define platform_pci_fixup_bus machvec_noop_bus
-#endif
#endif /* _ASM_IA64_MACHVEC_H */
diff -puN include/asm-ia64/machvec_sn2.h~revert-gregkh-pci-altix-add-initial-acpi-io-support include/asm-ia64/machvec_sn2.h
--- a/include/asm-ia64/machvec_sn2.h~revert-gregkh-pci-altix-add-initial-acpi-io-support
+++ a/include/asm-ia64/machvec_sn2.h
@@ -68,7 +68,6 @@ extern ia64_mv_dma_mapping_error sn_dma_
extern ia64_mv_dma_supported sn_dma_supported;
extern ia64_mv_migrate_t sn_migrate;
extern ia64_mv_msi_init_t sn_msi_init;
-extern ia64_mv_pci_fixup_bus_t sn_pci_fixup_bus;
/*
@@ -125,7 +124,6 @@ extern ia64_mv_pci_fixup_bus_t sn_pci_f
#else
#define platform_msi_init ((ia64_mv_msi_init_t*)NULL)
#endif
-#define platform_pci_fixup_bus sn_pci_fixup_bus
#include <asm/sn/io.h>
diff -puN include/asm-ia64/sn/acpi.h~revert-gregkh-pci-altix-add-initial-acpi-io-support /dev/null
--- a/include/asm-ia64/sn/acpi.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_ACPI_H
-#define _ASM_IA64_SN_ACPI_H
-
-#include "acpi/acglobal.h"
-
-#define SN_ACPI_BASE_SUPPORT() (acpi_gbl_DSDT->oem_revision >= 0x20101)
-
-#endif /* _ASM_IA64_SN_ACPI_H */
diff -puN include/asm-ia64/sn/pcidev.h~revert-gregkh-pci-altix-add-initial-acpi-io-support include/asm-ia64/sn/pcidev.h
--- a/include/asm-ia64/sn/pcidev.h~revert-gregkh-pci-altix-add-initial-acpi-io-support
+++ a/include/asm-ia64/sn/pcidev.h
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_IA64_SN_PCI_PCIDEV_H
#define _ASM_IA64_SN_PCI_PCIDEV_H
@@ -12,29 +12,31 @@
/*
* In ia64, pci_dev->sysdata must be a *pci_controller. To provide access to
- * the pcidev_info structs for all devices under a controller, we keep a
- * list of pcidev_info under pci_controller->platform_data.
+ * the pcidev_info structs for all devices under a controller, we extend the
+ * definition of pci_controller, via sn_pci_controller, to include a list
+ * of pcidev_info.
*/
-struct sn_platform_data {
- void *provider_soft;
+struct sn_pci_controller {
+ struct pci_controller pci_controller;
struct list_head pcidev_info;
};
-#define SN_PLATFORM_DATA(busdev) \
- ((struct sn_platform_data *)(PCI_CONTROLLER(busdev)->platform_data))
+#define SN_PCI_CONTROLLER(dev) ((struct sn_pci_controller *) dev->sysdata)
#define SN_PCIDEV_INFO(dev) sn_pcidev_info_get(dev)
+#define SN_PCIBUS_BUSSOFT_INFO(pci_bus) \
+ (struct pcibus_info *)((struct pcibus_bussoft *)(PCI_CONTROLLER((pci_bus))->platform_data))
/*
* Given a pci_bus, return the sn pcibus_bussoft struct. Note that
* this only works for root busses, not for busses represented by PPB's.
*/
#define SN_PCIBUS_BUSSOFT(pci_bus) \
- ((struct pcibus_bussoft *)(SN_PLATFORM_DATA(pci_bus)->provider_soft))
+ ((struct pcibus_bussoft *)(PCI_CONTROLLER((pci_bus))->platform_data))
#define SN_PCIBUS_BUSSOFT_INFO(pci_bus) \
- ((struct pcibus_info *)(SN_PLATFORM_DATA(pci_bus)->provider_soft))
+ (struct pcibus_info *)((struct pcibus_bussoft *)(PCI_CONTROLLER((pci_bus))->platform_data))
/*
* Given a struct pci_dev, return the sn pcibus_bussoft struct. Note
* that this is not equivalent to SN_PCIBUS_BUSSOFT(pci_dev->bus) due
@@ -70,6 +72,8 @@ extern void sn_irq_fixup(struct pci_dev
struct sn_irq_info *sn_irq_info);
extern void sn_irq_unfixup(struct pci_dev *pci_dev);
extern struct pcidev_info * sn_pcidev_info_get(struct pci_dev *);
+extern void sn_pci_controller_fixup(int segment, int busnum,
+ struct pci_bus *bus);
extern void sn_bus_store_sysdata(struct pci_dev *dev);
extern void sn_bus_free_sysdata(void);
extern void sn_generate_path(struct pci_bus *pci_bus, char *address);
diff -puN include/asm-ia64/sn/sn_feature_sets.h~revert-gregkh-pci-altix-add-initial-acpi-io-support include/asm-ia64/sn/sn_feature_sets.h
--- a/include/asm-ia64/sn/sn_feature_sets.h~revert-gregkh-pci-altix-add-initial-acpi-io-support
+++ a/include/asm-ia64/sn/sn_feature_sets.h
@@ -44,14 +44,8 @@ extern int sn_prom_feature_available(int
* Once enabled, a feature cannot be disabled.
*
* By default, features are disabled unless explicitly enabled.
- *
- * These defines must be kept in sync with the corresponding
- * PROM definitions in feature_sets.h.
*/
#define OSF_MCA_SLV_TO_OS_INIT_SLV 0
#define OSF_FEAT_LOG_SBES 1
-#define OSF_ACPI_ENABLE 2
-#define OSF_PCISEGMENT_ENABLE 3
-
#endif /* _ASM_IA64_SN_FEATURE_SETS_H */
diff -puN include/asm-ia64/sn/sn_sal.h~revert-gregkh-pci-altix-add-initial-acpi-io-support include/asm-ia64/sn/sn_sal.h
--- a/include/asm-ia64/sn/sn_sal.h~revert-gregkh-pci-altix-add-initial-acpi-io-support
+++ a/include/asm-ia64/sn/sn_sal.h
@@ -77,7 +77,6 @@
#define SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST 0x02000058 // deprecated
#define SN_SAL_IOIF_GET_DEVICE_DMAFLUSH_LIST 0x0200005a
-#define SN_SAL_IOIF_INIT 0x0200005f
#define SN_SAL_HUB_ERROR_INTERRUPT 0x02000060
#define SN_SAL_BTE_RECOVER 0x02000061
#define SN_SAL_RESERVED_DO_NOT_USE 0x02000062
diff -puN include/linux/pci.h~revert-gregkh-pci-altix-add-initial-acpi-io-support include/linux/pci.h
--- a/include/linux/pci.h~revert-gregkh-pci-altix-add-initial-acpi-io-support
+++ a/include/linux/pci.h
@@ -405,7 +405,6 @@ extern struct bus_type pci_bus_type;
extern struct list_head pci_root_buses; /* list of all known PCI buses */
extern struct list_head pci_devices; /* list of all devices */
-void pcibios_fixup_device_resources(struct pci_dev *);
void pcibios_fixup_bus(struct pci_bus *);
int __must_check pcibios_enable_device(struct pci_dev *, int mask);
char *pcibios_setup (char *str);
_
Patches currently in -mm which might be from akpm@xxxxxxxx are
origin.patch
hdrcheck-permission-fix.patch
mmc-driver-for-ti-flashmedia-card-reader-source.patch
ecryptfs.patch
fbdev-riva-warning-fix.patch
genirq-convert-the-i386-architecture-to-irq-chips.patch
genirq-x86_64-irq-reenable-migrating-irqs-to-other-cpus.patch
genirq-ia64-irq-dynamic-irq-support.patch
genirq-msi-only-build-msi-apicc-on-ia64.patch
genirq-i386-irq-remove-the-msi-assumption-that-irq-==-vector.patch
genirq-x86_64-irq-make-vector_irq-per-cpu.patch
add-hypertransport-capability-defines.patch
initial-generic-hypertransport-interrupt-support.patch
srcu-report-out-of-memory-errors.patch
git-powerpc-wrapper-dont-require-execute-permissions.patch
git-acpi.patch
acpi-preserve-correct-battery-state-through-suspend-resume-cycles-tidy.patch
acpi-asus-s3-resume-fix.patch
sony_apci-resume.patch
kauditd_thread-warning-fix.patch
git-cifs-fixup.patch
git-geode-fixup.patch
git-gfs2.patch
revert-input-make-input_openclose_device-more-robust.patch
git-libata-all.patch
libata-return-sense-data-in-hdio_drive_cmd-ioctl-tidy.patch
forcedeth-power-management-support-tidy.patch
drivers-net-ns83820c-add-paramter-to-disable-auto.patch
git-parisc.patch
git-parisc-powerpc-fix.patch
git-pcmcia-fixup.patch
git-serial-fixup.patch
serial-fix-uart_bug_txen-test.patch
pci-optionally-sort-device-lists-breadth-first-tweaks.patch
pci-optionally-sort-device-lists-breadth-first-force-on.patch
git-scsi-misc.patch
git-scsi-target-fixup.patch
git-scsi-target-vs-git-block.patch
xpad-dance-pad-support-tidy.patch
fix-x86_64-mm-kernel-stack-termination.patch
x86_64-dump_trace-atomicity-fix.patch
spinlock-debug-all-cpu-backtrace.patch
spinlock-debug-all-cpu-backtrace-fix.patch
spinlock-debug-all-cpu-backtrace-fix-2.patch
spinlock-debug-all-cpu-backtrace-fix-3.patch
xfs-rename-uio_read.patch
get-rid-of-zone_table.patch
slab-reduce-numa-text-size-tidy.patch
swap-token-new-scheme-to-preempt-token-tidy.patch
radix-tree-rcu-lockless-readside.patch
acx1xx-wireless-driver.patch
tiacx-pci-build-fix.patch
tiacx-ia64-fix.patch
tiacx-build-fix.patch
swsusp-add-resume_offset-command-line-parameter-rev-2-fix.patch
deprecate-smbfs-in-favour-of-cifs.patch
edac-new-opteron-athlon64-memory-controller-driver.patch
edac-new-opteron-athlon64-memory-controller-driver-tidy.patch
add-address_space_operationsbatch_write-fix.patch
add-config_headers_check-option-to-automatically-run-make-headers_check-nobble.patch
generic-implementatation-of-bug.patch
generic-implementatation-of-bug-fix.patch
generic-bug-for-i386.patch
generic-bug-for-x86-64.patch
fs-cache-make-kafs-use-fs-cache-fix.patch
fs-cache-make-kafs-use-fs-cache-vs-streamline-generic_file_-interfaces-and-filemap.patch
nfs-use-local-caching-12-fix.patch
swap_prefetch-vs-zoned-counters.patch
readahead-sysctl-parameters-fix.patch
make-copy_from_user_inatomic-not-zero-the-tail-on-i386-vs-reiser4.patch
make-kmem_cache_destroy-return-void-reiser4.patch
reiser4-hardirq-include-fix.patch
reiser4-run-truncate_inode_pages-in-reiser4_delete_inode.patch
reiser4-get_sb_dev-fix.patch
reiser4-vs-zoned-allocator.patch
reiser4-rename-generic_sounding_globalspatch-fix.patch
hpt3xx-rework-rate-filtering-tidy.patch
gtod-persistent-clock-support-i386-update-fix.patch
hrtimers-state-tracking-fix.patch
clockevents-drivers-for-i386-fix.patch
debugging-feature-timer-stats-fix.patch
kevent-core-files-fix.patch
kevent-core-files-s390-hack.patch
kevent-socket-notifications-fix-2.patch
kevent-socket-notifications-fix-4.patch
nr_blockdev_pages-in_interrupt-warning.patch
device-suspend-debug.patch
slab-leaks3-default-y.patch
x86-kmap_atomic-debugging.patch
restore-rogue-readahead-printk.patch
put_bh-debug.patch
acpi_format_exception-debug.patch
jmicron-warning-fix.patch
squash-ipc-warnings.patch
squash-transmeta-warnings.patch
squash-tcp-warnings.patch
squash-udf-warnings.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
