The patch titled
Subject: powerpc/fsl_rio: apply changes for RIO spec rev 3
has been added to the -mm tree. Its filename is
powerpc-fsl_rio-apply-changes-for-rio-spec-rev-3.patch
This patch should soon appear at
http://ozlabs.org/~akpm/mmots/broken-out/powerpc-fsl_rio-apply-changes-for-rio-spec-rev-3.patch
and later at
http://ozlabs.org/~akpm/mmotm/broken-out/powerpc-fsl_rio-apply-changes-for-rio-spec-rev-3.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
The -mm tree is included into linux-next and is updated
there every 3-4 working days
------------------------------------------------------
From: Alexandre Bounine <alexandre.bounine@xxxxxxx>
Subject: powerpc/fsl_rio: apply changes for RIO spec rev 3
- Remove check for parallel PHY
- Set LP-Serial Register Map type
Link: http://lkml.kernel.org/r/1469125134-16523-13-git-send-email-alexandre.bounine@xxxxxxx
Signed-off-by: Alexandre Bounine <alexandre.bounine@xxxxxxx>
Cc: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>
Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
Cc: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
Cc: Andre van Herk <andre.van.herk@xxxxxxxxxxxxxxxxxxxxxxxxx>
Cc: Barry Wood <barry.wood@xxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
arch/powerpc/sysdev/fsl_rio.c | 12 ++----------
1 file changed, 2 insertions(+), 10 deletions(-)
diff -puN arch/powerpc/sysdev/fsl_rio.c~powerpc-fsl_rio-apply-changes-for-rio-spec-rev-3 arch/powerpc/sysdev/fsl_rio.c
--- a/arch/powerpc/sysdev/fsl_rio.c~powerpc-fsl_rio-apply-changes-for-rio-spec-rev-3
+++ a/arch/powerpc/sysdev/fsl_rio.c
@@ -643,19 +643,11 @@ int fsl_rio_setup(struct platform_device
port->ops = ops;
port->priv = priv;
port->phys_efptr = 0x100;
+ port->phys_rmap = 1;
priv->regs_win = rio_regs_win;
- /* Probe the master port phy type */
ccsr = in_be32(priv->regs_win + RIO_CCSR + i*0x20);
- port->phy_type = (ccsr & 1) ? RIO_PHY_SERIAL : RIO_PHY_PARALLEL;
- if (port->phy_type == RIO_PHY_PARALLEL) {
- dev_err(&dev->dev, "RIO: Parallel PHY type, unsupported port type!\n");
- release_resource(&port->iores);
- kfree(priv);
- kfree(port);
- continue;
- }
- dev_info(&dev->dev, "RapidIO PHY type: Serial\n");
+
/* Checking the port training status */
if (in_be32((priv->regs_win + RIO_ESCSR + i*0x20)) & 1) {
dev_err(&dev->dev, "Port %d is not ready. "
_
Patches currently in -mm which might be from alexandre.bounine@xxxxxxx are
rapidio-add-rapidio-channelized-messaging-driver.patch
rapidio-documentation-fix-mangled-paragraph-in-mport_cdev.patch
rapidio-fix-return-value-description-for-dma_prep-functions.patch
rapidio-tsi721_dma-add-channel-mask-and-queue-size-parameters.patch
rapidio-tsi721-add-pcie-mrrs-override-parameter.patch
rapidio-tsi721-add-messaging-mbox-selector-parameter.patch
rapidio-tsi721_dma-advance-queue-processing-from-transfer-submit-call.patch
rapidio-fix-error-handling-in-mbox-request-release-functions.patch
rapidio-idt_gen2-fix-locking-warning.patch
rapidio-change-inbound-window-size-type-to-u64.patch
rapidio-modify-for-rev3-specification-changes.patch
powerpc-fsl_rio-apply-changes-for-rio-spec-rev-3.patch
rapidio-switches-add-driver-for-idt-gen3-switches.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
