The patch titled
Subject: zram: cosmetic: cleanup documentation
has been added to the -mm tree. Its filename is
zram-cosmetic-cleanup-documentation.patch
This patch should soon appear at
http://ozlabs.org/~akpm/mmots/broken-out/zram-cosmetic-cleanup-documentation.patch
and later at
http://ozlabs.org/~akpm/mmotm/broken-out/zram-cosmetic-cleanup-documentation.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
The -mm tree is included into linux-next and is updated
there every 3-4 working days
------------------------------------------------------
From: Sergey Senozhatsky <sergey.senozhatsky@xxxxxxxxx>
Subject: zram: cosmetic: cleanup documentation
zram documentation is a mix of different styles: spaces, tabs, tabs +
spaces, etc. Clean it up.
Link: http://lkml.kernel.org/r/20160531122017.2878-6-sergey.senozhatsky@xxxxxxxxx
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@xxxxxxxxx>
Cc: Minchan Kim <minchan@xxxxxxxxxx>
Cc: Joonsoo Kim <iamjoonsoo.kim@xxxxxxx>
Cc: Jonathan Corbet <corbet@xxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
Documentation/blockdev/zram.txt | 89 ++++++++++++++----------------
1 file changed, 44 insertions(+), 45 deletions(-)
diff -puN Documentation/blockdev/zram.txt~zram-cosmetic-cleanup-documentation Documentation/blockdev/zram.txt
--- a/Documentation/blockdev/zram.txt~zram-cosmetic-cleanup-documentation
+++ a/Documentation/blockdev/zram.txt
@@ -59,23 +59,23 @@ num_devices parameter is optional and te
pre-created. Default: 1.
2) Set max number of compression streams
- Regardless the value passed to this attribute, ZRAM will always
- allocate multiple compression streams - one per online CPUs - thus
- allowing several concurrent compression operations. The number of
- allocated compression streams goes down when some of the CPUs
- become offline. There is no single-compression-stream mode anymore,
- unless you are running a UP system or has only 1 CPU online.
+Regardless the value passed to this attribute, ZRAM will always
+allocate multiple compression streams - one per online CPUs - thus
+allowing several concurrent compression operations. The number of
+allocated compression streams goes down when some of the CPUs
+become offline. There is no single-compression-stream mode anymore,
+unless you are running a UP system or has only 1 CPU online.
- To find out how many streams are currently available:
+To find out how many streams are currently available:
cat /sys/block/zram0/max_comp_streams
3) Select compression algorithm
- Using comp_algorithm device attribute one can see available and
- currently selected (shown in square brackets) compression algorithms,
- change selected compression algorithm (once the device is initialised
- there is no way to change compression algorithm).
+Using comp_algorithm device attribute one can see available and
+currently selected (shown in square brackets) compression algorithms,
+change selected compression algorithm (once the device is initialised
+there is no way to change compression algorithm).
- Examples:
+Examples:
#show supported compression algorithms
cat /sys/block/zram0/comp_algorithm
lzo [lz4]
@@ -83,28 +83,27 @@ pre-created. Default: 1.
#select lzo compression algorithm
echo lzo > /sys/block/zram0/comp_algorithm
- For the time being, the `comp_algorithm' content does not necessarily
- show every compression algorithm supported by the kernel. We keep this
- list primarily to simplify device configuration and one can configure
- a new device with a compression algorithm that is not listed in
- `comp_algorithm'. The thing is that, internally, ZRAM uses Crypto API
- and, if some of the algorithms were built as modules, it's impossible
- to list all of them using, for instance, /proc/crypto or any other
- method. This, however, has an advantage of permitting the usage of
- custom crypto compression modules (implementing S/W or H/W
- compression).
+For the time being, the `comp_algorithm' content does not necessarily
+show every compression algorithm supported by the kernel. We keep this
+list primarily to simplify device configuration and one can configure
+a new device with a compression algorithm that is not listed in
+`comp_algorithm'. The thing is that, internally, ZRAM uses Crypto API
+and, if some of the algorithms were built as modules, it's impossible
+to list all of them using, for instance, /proc/crypto or any other
+method. This, however, has an advantage of permitting the usage of
+custom crypto compression modules (implementing S/W or H/W compression).
4) Set Disksize
- Set disk size by writing the value to sysfs node 'disksize'.
- The value can be either in bytes or you can use mem suffixes.
- Examples:
- # Initialize /dev/zram0 with 50MB disksize
- echo $((50*1024*1024)) > /sys/block/zram0/disksize
-
- # Using mem suffixes
- echo 256K > /sys/block/zram0/disksize
- echo 512M > /sys/block/zram0/disksize
- echo 1G > /sys/block/zram0/disksize
+Set disk size by writing the value to sysfs node 'disksize'.
+The value can be either in bytes or you can use mem suffixes.
+Examples:
+ # Initialize /dev/zram0 with 50MB disksize
+ echo $((50*1024*1024)) > /sys/block/zram0/disksize
+
+ # Using mem suffixes
+ echo 256K > /sys/block/zram0/disksize
+ echo 512M > /sys/block/zram0/disksize
+ echo 1G > /sys/block/zram0/disksize
Note:
There is little point creating a zram of greater than twice the size of memory
@@ -112,20 +111,20 @@ since we expect a 2:1 compression ratio.
size of the disk when not in use so a huge zram is wasteful.
5) Set memory limit: Optional
- Set memory limit by writing the value to sysfs node 'mem_limit'.
- The value can be either in bytes or you can use mem suffixes.
- In addition, you could change the value in runtime.
- Examples:
- # limit /dev/zram0 with 50MB memory
- echo $((50*1024*1024)) > /sys/block/zram0/mem_limit
-
- # Using mem suffixes
- echo 256K > /sys/block/zram0/mem_limit
- echo 512M > /sys/block/zram0/mem_limit
- echo 1G > /sys/block/zram0/mem_limit
+Set memory limit by writing the value to sysfs node 'mem_limit'.
+The value can be either in bytes or you can use mem suffixes.
+In addition, you could change the value in runtime.
+Examples:
+ # limit /dev/zram0 with 50MB memory
+ echo $((50*1024*1024)) > /sys/block/zram0/mem_limit
+
+ # Using mem suffixes
+ echo 256K > /sys/block/zram0/mem_limit
+ echo 512M > /sys/block/zram0/mem_limit
+ echo 1G > /sys/block/zram0/mem_limit
- # To disable memory limit
- echo 0 > /sys/block/zram0/mem_limit
+ # To disable memory limit
+ echo 0 > /sys/block/zram0/mem_limit
6) Activate:
mkswap /dev/zram0
_
Patches currently in -mm which might be from sergey.senozhatsky@xxxxxxxxx are
zram-rename-zstrm-find-release-functions.patch
zram-switch-to-crypto-compress-api.patch
zram-align-zcomp-interface-to-crypto-comp-api.patch
zram-use-crypto-api-to-check-alg-availability.patch
zram-cosmetic-cleanup-documentation.patch
zram-delete-custom-lzo-lz4.patch
zram-add-more-compression-algorithms.patch
zram-drop-gfp_t-from-zcomp_strm_alloc.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
