+ lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean.patch added to -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch titled
     Subject: lib/GCD.c: use binary GCD algorithm instead of Euclidean
has been added to the -mm tree.  Its filename is
     lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean.patch

This patch should soon appear at
    http://ozlabs.org/~akpm/mmots/broken-out/lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean.patch
and later at
    http://ozlabs.org/~akpm/mmotm/broken-out/lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean.patch

Before you just go and hit "reply", please:
   a) Consider who else should be cc'ed
   b) Prefer to cc a suitable mailing list as well
   c) Ideally: find the original patch on the mailing list and do a
      reply-to-all to that, adding suitable additional cc's

*** Remember to use Documentation/SubmitChecklist when testing your code ***

The -mm tree is included into linux-next and is updated
there every 3-4 working days

------------------------------------------------------
From: Zhaoxiu Zeng <zhaoxiu.zeng@xxxxxxxxx>
Subject: lib/GCD.c: use binary GCD algorithm instead of Euclidean

The binary GCD algorithm is based on the following facts:
	1. If a and b are all evens, then gcd(a,b) = 2 * gcd(a/2, b/2)
	2. If a is even and b is odd, then gcd(a,b) = gcd(a/2, b)
	3. If a and b are all odds, then gcd(a,b) = gcd((a-b)/2, b) = gcd((a+b)/2, b)

Even on x86 machines with reasonable division hardware, the binary
algorithm runs about 25% faster (80% the execution time) than the
division-based Euclidian algorithm.

On platforms like Alpha and ARMv6 where division is a function call to
emulation code, it's even more significant.

There are two variants of the code here, depending on whether a fast __ffs
(find least significant set bit) instruction is available.  This allows
the unpredictable branches in the bit-at-a-time shifting loop to be
eliminated.

If fast __ffs is not available, the "even/odd" GCD variant is used.

I use the following code to benchmark:

	#include <stdio.h>
	#include <stdlib.h>
	#include <stdint.h>
	#include <string.h>
	#include <time.h>
	#include <unistd.h>

	#define swap(a, b) \
		do { \
			a ^= b; \
			b ^= a; \
			a ^= b; \
		} while (0)

	unsigned long gcd0(unsigned long a, unsigned long b)
	{
		unsigned long r;

		if (a < b) {
			swap(a, b);
		}

		if (b == 0)
			return a;

		while ((r = a % b) != 0) {
			a = b;
			b = r;
		}

		return b;
	}

	unsigned long gcd1(unsigned long a, unsigned long b)
	{
		unsigned long r = a | b;

		if (!a || !b)
			return r;

		b >>= __builtin_ctzl(b);

		for (;;) {
			a >>= __builtin_ctzl(a);
			if (a == b)
				return a << __builtin_ctzl(r);

			if (a < b)
				swap(a, b);
			a -= b;
		}
	}

	unsigned long gcd2(unsigned long a, unsigned long b)
	{
		unsigned long r = a | b;

		if (!a || !b)
			return r;

		r &= -r;

		while (!(b & r))
			b >>= 1;

		for (;;) {
			while (!(a & r))
				a >>= 1;
			if (a == b)
				return a;

			if (a < b)
				swap(a, b);
			a -= b;
			a >>= 1;
			if (a & r)
				a += b;
			a >>= 1;
		}
	}

	unsigned long gcd3(unsigned long a, unsigned long b)
	{
		unsigned long r = a | b;

		if (!a || !b)
			return r;

		b >>= __builtin_ctzl(b);
		if (b == 1)
			return r & -r;

		for (;;) {
			a >>= __builtin_ctzl(a);
			if (a == 1)
				return r & -r;
			if (a == b)
				return a << __builtin_ctzl(r);

			if (a < b)
				swap(a, b);
			a -= b;
		}
	}

	unsigned long gcd4(unsigned long a, unsigned long b)
	{
		unsigned long r = a | b;

		if (!a || !b)
			return r;

		r &= -r;

		while (!(b & r))
			b >>= 1;
		if (b == r)
			return r;

		for (;;) {
			while (!(a & r))
				a >>= 1;
			if (a == r)
				return r;
			if (a == b)
				return a;

			if (a < b)
				swap(a, b);
			a -= b;
			a >>= 1;
			if (a & r)
				a += b;
			a >>= 1;
		}
	}

	static unsigned long (*gcd_func[])(unsigned long a, unsigned long b) = {
		gcd0, gcd1, gcd2, gcd3, gcd4,
	};

	#define TEST_ENTRIES (sizeof(gcd_func) / sizeof(gcd_func[0]))

	#if defined(__x86_64__)

	#define rdtscll(val) do { \
		unsigned long __a,__d; \
		__asm__ __volatile__("rdtsc" : "=a" (__a), "=d" (__d)); \
		(val) = ((unsigned long long)__a) | (((unsigned long long)__d)<<32); \
	} while(0)

	static unsigned long long benchmark_gcd_func(unsigned long (*gcd)(unsigned long, unsigned long),
								unsigned long a, unsigned long b, unsigned long *res)
	{
		unsigned long long start, end;
		unsigned long long ret;
		unsigned long gcd_res;

		rdtscll(start);
		gcd_res = gcd(a, b);
		rdtscll(end);

		if (end >= start)
			ret = end - start;
		else
			ret = ~0ULL - start + 1 + end;

		*res = gcd_res;
		return ret;
	}

	#else

	static inline struct timespec read_time(void)
	{
		struct timespec time;
		clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &time);
		return time;
	}

	static inline unsigned long long diff_time(struct timespec start, struct timespec end)
	{
		struct timespec temp;

		if ((end.tv_nsec - start.tv_nsec) < 0) {
			temp.tv_sec = end.tv_sec - start.tv_sec - 1;
			temp.tv_nsec = 1000000000ULL + end.tv_nsec - start.tv_nsec;
		} else {
			temp.tv_sec = end.tv_sec - start.tv_sec;
			temp.tv_nsec = end.tv_nsec - start.tv_nsec;
		}

		return temp.tv_sec * 1000000000ULL + temp.tv_nsec;
	}

	static unsigned long long benchmark_gcd_func(unsigned long (*gcd)(unsigned long, unsigned long),
								unsigned long a, unsigned long b, unsigned long *res)
	{
		struct timespec start, end;
		unsigned long gcd_res;

		start = read_time();
		gcd_res = gcd(a, b);
		end = read_time();

		*res = gcd_res;
		return diff_time(start, end);
	}

	#endif

	static inline unsigned long get_rand()
	{
		if (sizeof(long) == 8)
			return (unsigned long)rand() << 32 | rand();
		else
			return rand();
	}

	int main(int argc, char **argv)
	{
		unsigned int seed = time(0);
		int loops = 100;
		int repeats = 1000;
		unsigned long (*res)[TEST_ENTRIES];
		unsigned long long elapsed[TEST_ENTRIES];
		int i, j, k;

		for (;;) {
			int opt = getopt(argc, argv, "n:r:s:");
			/* End condition always first */
			if (opt == -1)
				break;

			switch (opt) {
			case 'n':
				loops = atoi(optarg);
				break;
			case 'r':
				repeats = atoi(optarg);
				break;
			case 's':
				seed = strtoul(optarg, NULL, 10);
				break;
			default:
				/* You won't actually get here. */
				break;
			}
		}

		res = malloc(sizeof(unsigned long) * TEST_ENTRIES * loops);
		memset(elapsed, 0, sizeof(elapsed));

		srand(seed);
		for (j = 0; j < loops; j++) {
			unsigned long a = get_rand();
			/* Do we have args? */
			unsigned long b = argc > optind ? strtoul(argv[optind], NULL, 10) : get_rand();
			unsigned long long min_elapsed[TEST_ENTRIES];
			for (k = 0; k < repeats; k++) {
				for (i = 0; i < TEST_ENTRIES; i++) {
					unsigned long long tmp = benchmark_gcd_func(gcd_func[i], a, b, &res[j][i]);
					if (k == 0 || min_elapsed[i] > tmp)
						min_elapsed[i] = tmp;
				}
			}
			for (i = 0; i < TEST_ENTRIES; i++)
				elapsed[i] += min_elapsed[i];
		}

		for (i = 0; i < TEST_ENTRIES; i++)
			printf("gcd%d: elapsed %llu\n", i, elapsed[i]);

		k = 0;
		srand(seed);
		for (j = 0; j < loops; j++) {
			unsigned long a = get_rand();
			unsigned long b = argc > optind ? strtoul(argv[optind], NULL, 10) : get_rand();
			for (i = 1; i < TEST_ENTRIES; i++) {
				if (res[j][i] != res[j][0])
					break;
			}
			if (i < TEST_ENTRIES) {
				if (k == 0) {
					k = 1;
					fprintf(stderr, "Error:\n");
				}
				fprintf(stderr, "gcd(%lu, %lu): ", a, b);
				for (i = 0; i < TEST_ENTRIES; i++)
					fprintf(stderr, "%ld%s", res[j][i], i < TEST_ENTRIES - 1 ? ", " : "\n");
			}
		}

		if (k == 0)
			fprintf(stderr, "PASS\n");

		free(res);

		return 0;
	}

Compiled with "-O2", on "VirtualBox 4.4.0-22-generic #38-Ubuntu x86_64" got:

zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10
gcd0: elapsed 10174
gcd1: elapsed 2120
gcd2: elapsed 2902
gcd3: elapsed 2039
gcd4: elapsed 2812
PASS
zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10
gcd0: elapsed 9309
gcd1: elapsed 2280
gcd2: elapsed 2822
gcd3: elapsed 2217
gcd4: elapsed 2710
PASS
zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10
gcd0: elapsed 9589
gcd1: elapsed 2098
gcd2: elapsed 2815
gcd3: elapsed 2030
gcd4: elapsed 2718
PASS
zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10
gcd0: elapsed 9914
gcd1: elapsed 2309
gcd2: elapsed 2779
gcd3: elapsed 2228
gcd4: elapsed 2709
PASS

Signed-off-by: Zhaoxiu Zeng <zhaoxiu.zeng@xxxxxxxxx>
Signed-off-by: George Spelvin <linux@xxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 arch/Kconfig                         |    3 
 arch/alpha/Kconfig                   |    1 
 arch/arc/Kconfig                     |    1 
 arch/arm/mm/Kconfig                  |    3 
 arch/h8300/Kconfig                   |    1 
 arch/m32r/Kconfig                    |    1 
 arch/m68k/Kconfig.cpu                |   11 +++
 arch/metag/Kconfig                   |    1 
 arch/microblaze/Kconfig              |    1 
 arch/mips/include/asm/cpu-features.h |   10 +++
 arch/nios2/Kconfig                   |    1 
 arch/openrisc/Kconfig                |    1 
 arch/parisc/Kconfig                  |    1 
 arch/s390/Kconfig                    |    1 
 arch/score/Kconfig                   |    1 
 arch/sh/Kconfig                      |    1 
 arch/sparc/Kconfig                   |    1 
 lib/gcd.c                            |   77 +++++++++++++++++++++----
 18 files changed, 107 insertions(+), 10 deletions(-)

diff -puN arch/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean arch/Kconfig
--- a/arch/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean
+++ a/arch/Kconfig
@@ -647,4 +647,7 @@ config COMPAT_OLD_SIGACTION
 config ARCH_NO_COHERENT_DMA_MMAP
 	bool
 
+config CPU_NO_EFFICIENT_FFS
+	def_bool n
+
 source "kernel/gcov/Kconfig"
diff -puN arch/alpha/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean arch/alpha/Kconfig
--- a/arch/alpha/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean
+++ a/arch/alpha/Kconfig
@@ -27,6 +27,7 @@ config ALPHA
 	select MODULES_USE_ELF_RELA
 	select ODD_RT_SIGACTION
 	select OLD_SIGSUSPEND
+	select CPU_NO_EFFICIENT_FFS if !ALPHA_EV67
 	help
 	  The Alpha is a 64-bit general-purpose processor designed and
 	  marketed by the Digital Equipment Corporation of blessed memory,
diff -puN arch/arc/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean arch/arc/Kconfig
--- a/arch/arc/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean
+++ a/arch/arc/Kconfig
@@ -101,6 +101,7 @@ choice
 
 config ISA_ARCOMPACT
 	bool "ARCompact ISA"
+	select CPU_NO_EFFICIENT_FFS
 	help
 	  The original ARC ISA of ARC600/700 cores
 
diff -puN arch/arm/mm/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean arch/arm/mm/Kconfig
--- a/arch/arm/mm/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean
+++ a/arch/arm/mm/Kconfig
@@ -421,18 +421,21 @@ config CPU_32v3
 	select CPU_USE_DOMAINS if MMU
 	select NEED_KUSER_HELPERS
 	select TLS_REG_EMUL if SMP || !MMU
+	select CPU_NO_EFFICIENT_FFS
 
 config CPU_32v4
 	bool
 	select CPU_USE_DOMAINS if MMU
 	select NEED_KUSER_HELPERS
 	select TLS_REG_EMUL if SMP || !MMU
+	select CPU_NO_EFFICIENT_FFS
 
 config CPU_32v4T
 	bool
 	select CPU_USE_DOMAINS if MMU
 	select NEED_KUSER_HELPERS
 	select TLS_REG_EMUL if SMP || !MMU
+	select CPU_NO_EFFICIENT_FFS
 
 config CPU_32v5
 	bool
diff -puN arch/h8300/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean arch/h8300/Kconfig
--- a/arch/h8300/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean
+++ a/arch/h8300/Kconfig
@@ -20,6 +20,7 @@ config H8300
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZO
 	select HAVE_ARCH_KGDB
+	select CPU_NO_EFFICIENT_FFS
 
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y
diff -puN arch/m32r/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean arch/m32r/Kconfig
--- a/arch/m32r/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean
+++ a/arch/m32r/Kconfig
@@ -17,6 +17,7 @@ config M32R
 	select ARCH_USES_GETTIMEOFFSET
 	select MODULES_USE_ELF_RELA
 	select HAVE_DEBUG_STACKOVERFLOW
+	select CPU_NO_EFFICIENT_FFS
 
 config SBUS
 	bool
diff -puN arch/m68k/Kconfig.cpu~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean arch/m68k/Kconfig.cpu
--- a/arch/m68k/Kconfig.cpu~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean
+++ a/arch/m68k/Kconfig.cpu
@@ -40,6 +40,7 @@ config M68000
 	select CPU_HAS_NO_MULDIV64
 	select CPU_HAS_NO_UNALIGNED
 	select GENERIC_CSUM
+	select CPU_NO_EFFICIENT_FFS
 	help
 	  The Freescale (was Motorola) 68000 CPU is the first generation of
 	  the well known M68K family of processors. The CPU core as well as
@@ -51,6 +52,7 @@ config MCPU32
 	bool
 	select CPU_HAS_NO_BITFIELDS
 	select CPU_HAS_NO_UNALIGNED
+	select CPU_NO_EFFICIENT_FFS
 	help
 	  The Freescale (was then Motorola) CPU32 is a CPU core that is
 	  based on the 68020 processor. For the most part it is used in
@@ -130,6 +132,7 @@ config M5206
 	depends on !MMU
 	select COLDFIRE_SW_A7
 	select HAVE_MBAR
+	select CPU_NO_EFFICIENT_FFS
 	help
 	  Motorola ColdFire 5206 processor support.
 
@@ -138,6 +141,7 @@ config M5206e
 	depends on !MMU
 	select COLDFIRE_SW_A7
 	select HAVE_MBAR
+	select CPU_NO_EFFICIENT_FFS
 	help
 	  Motorola ColdFire 5206e processor support.
 
@@ -163,6 +167,7 @@ config M5249
 	depends on !MMU
 	select COLDFIRE_SW_A7
 	select HAVE_MBAR
+	select CPU_NO_EFFICIENT_FFS
 	help
 	  Motorola ColdFire 5249 processor support.
 
@@ -171,6 +176,7 @@ config M525x
 	depends on !MMU
 	select COLDFIRE_SW_A7
 	select HAVE_MBAR
+	select CPU_NO_EFFICIENT_FFS
 	help
 	  Freescale (Motorola) Coldfire 5251/5253 processor support.
 
@@ -189,6 +195,7 @@ config M5272
 	depends on !MMU
 	select COLDFIRE_SW_A7
 	select HAVE_MBAR
+	select CPU_NO_EFFICIENT_FFS
 	help
 	  Motorola ColdFire 5272 processor support.
 
@@ -217,6 +224,7 @@ config M5307
 	select COLDFIRE_SW_A7
 	select HAVE_CACHE_CB
 	select HAVE_MBAR
+	select CPU_NO_EFFICIENT_FFS
 	help
 	  Motorola ColdFire 5307 processor support.
 
@@ -242,6 +250,7 @@ config M5407
 	select COLDFIRE_SW_A7
 	select HAVE_CACHE_CB
 	select HAVE_MBAR
+	select CPU_NO_EFFICIENT_FFS
 	help
 	  Motorola ColdFire 5407 processor support.
 
@@ -251,6 +260,7 @@ config M547x
 	select MMU_COLDFIRE if MMU
 	select HAVE_CACHE_CB
 	select HAVE_MBAR
+	select CPU_NO_EFFICIENT_FFS
 	help
 	  Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support.
 
@@ -260,6 +270,7 @@ config M548x
 	select M54xx
 	select HAVE_CACHE_CB
 	select HAVE_MBAR
+	select CPU_NO_EFFICIENT_FFS
 	help
 	  Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support.
 
diff -puN arch/metag/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean arch/metag/Kconfig
--- a/arch/metag/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean
+++ a/arch/metag/Kconfig
@@ -30,6 +30,7 @@ config METAG
 	select OF
 	select OF_EARLY_FLATTREE
 	select SPARSE_IRQ
+	select CPU_NO_EFFICIENT_FFS
 
 config STACKTRACE_SUPPORT
 	def_bool y
diff -puN arch/microblaze/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean arch/microblaze/Kconfig
--- a/arch/microblaze/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean
+++ a/arch/microblaze/Kconfig
@@ -32,6 +32,7 @@ config MICROBLAZE
 	select OF_EARLY_FLATTREE
 	select TRACING_SUPPORT
 	select VIRT_TO_BUS
+	select CPU_NO_EFFICIENT_FFS
 
 config SWAP
 	def_bool n
diff -puN arch/mips/include/asm/cpu-features.h~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean arch/mips/include/asm/cpu-features.h
--- a/arch/mips/include/asm/cpu-features.h~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean
+++ a/arch/mips/include/asm/cpu-features.h
@@ -180,6 +180,16 @@
 #endif
 #endif
 
+/* __builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r */
+#if !((defined(cpu_has_mips32r1) && cpu_has_mips32r1) || \
+	  (defined(cpu_has_mips32r2) && cpu_has_mips32r2) || \
+	  (defined(cpu_has_mips32r6) && cpu_has_mips32r6) || \
+	  (defined(cpu_has_mips64r1) && cpu_has_mips64r1) || \
+	  (defined(cpu_has_mips64r2) && cpu_has_mips64r2) || \
+	  (defined(cpu_has_mips64r6) && cpu_has_mips64r6))
+#define CONFIG_CPU_NO_EFFICIENT_FFS 1
+#endif
+
 #ifndef cpu_has_mips_1
 # define cpu_has_mips_1		(!cpu_has_mips_r6)
 #endif
diff -puN arch/nios2/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean arch/nios2/Kconfig
--- a/arch/nios2/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean
+++ a/arch/nios2/Kconfig
@@ -16,6 +16,7 @@ config NIOS2
 	select SOC_BUS
 	select SPARSE_IRQ
 	select USB_ARCH_HAS_HCD if USB_SUPPORT
+	select CPU_NO_EFFICIENT_FFS
 
 config GENERIC_CSUM
 	def_bool y
diff -puN arch/openrisc/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean arch/openrisc/Kconfig
--- a/arch/openrisc/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean
+++ a/arch/openrisc/Kconfig
@@ -25,6 +25,7 @@ config OPENRISC
 	select MODULES_USE_ELF_RELA
 	select HAVE_DEBUG_STACKOVERFLOW
 	select OR1K_PIC
+	select CPU_NO_EFFICIENT_FFS if !OPENRISC_HAVE_INST_FF1
 
 config MMU
 	def_bool y
diff -puN arch/parisc/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean arch/parisc/Kconfig
--- a/arch/parisc/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean
+++ a/arch/parisc/Kconfig
@@ -32,6 +32,7 @@ config PARISC
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_SECCOMP_FILTER
 	select ARCH_NO_COHERENT_DMA_MMAP
+	select CPU_NO_EFFICIENT_FFS
 
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
diff -puN arch/s390/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean arch/s390/Kconfig
--- a/arch/s390/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean
+++ a/arch/s390/Kconfig
@@ -122,6 +122,7 @@ config S390
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_EARLY_PFN_TO_NID
 	select HAVE_ARCH_JUMP_LABEL
+	select CPU_NO_EFFICIENT_FFS if !HAVE_MARCH_Z9_109_FEATURES
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_SOFT_DIRTY
 	select HAVE_ARCH_TRACEHOOK
diff -puN arch/score/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean arch/score/Kconfig
--- a/arch/score/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean
+++ a/arch/score/Kconfig
@@ -14,6 +14,7 @@ config SCORE
 	select VIRT_TO_BUS
 	select MODULES_USE_ELF_REL
 	select CLONE_BACKWARDS
+	select CPU_NO_EFFICIENT_FFS
 
 choice
 	prompt "System type"
diff -puN arch/sh/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean arch/sh/Kconfig
--- a/arch/sh/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean
+++ a/arch/sh/Kconfig
@@ -20,6 +20,7 @@ config SUPERH
 	select PERF_USE_VMALLOC
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_KERNEL_GZIP
+	select CPU_NO_EFFICIENT_FFS
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
 	select HAVE_KERNEL_XZ
diff -puN arch/sparc/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean arch/sparc/Kconfig
--- a/arch/sparc/Kconfig~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean
+++ a/arch/sparc/Kconfig
@@ -43,6 +43,7 @@ config SPARC
 	select ODD_RT_SIGACTION
 	select OLD_SIGSUSPEND
 	select ARCH_HAS_SG_CHAIN
+	select CPU_NO_EFFICIENT_FFS
 
 config SPARC32
 	def_bool !64BIT
diff -puN lib/gcd.c~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean lib/gcd.c
--- a/lib/gcd.c~lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean
+++ a/lib/gcd.c
@@ -2,20 +2,77 @@
 #include <linux/gcd.h>
 #include <linux/export.h>
 
-/* Greatest common divisor */
+/*
+ * This implements the binary GCD algorithm. (Often attributed to Stein,
+ * but as Knuth has noted, appears in a first-century Chinese math text.)
+ *
+ * This is faster than the division-based algorithm even on x86, which
+ * has decent hardware division.
+ */
+
+#if !defined(CONFIG_CPU_NO_EFFICIENT_FFS)
+
+/* If __ffs is available, the even/odd algorithm benchmarks slower. */
 unsigned long gcd(unsigned long a, unsigned long b)
 {
-	unsigned long r;
+	unsigned long r = a | b;
+
+	if (!a || !b)
+		return r;
 
-	if (a < b)
-		swap(a, b);
+	b >>= __ffs(b);
+	if (b == 1)
+		return r & -r;
 
-	if (!b)
-		return a;
-	while ((r = a % b) != 0) {
-		a = b;
-		b = r;
+	for (;;) {
+		a >>= __ffs(a);
+		if (a == 1)
+			return r & -r;
+		if (a == b)
+			return a << __ffs(r);
+
+		if (a < b)
+			swap(a, b);
+		a -= b;
 	}
-	return b;
 }
+
+#else
+
+/* If normalization is done by loops, the even/odd algorithm is a win. */
+unsigned long gcd(unsigned long a, unsigned long b)
+{
+	unsigned long r = a | b;
+
+	if (!a || !b)
+		return r;
+
+	/* Isolate lsbit of r */
+	r &= -r;
+
+	while (!(b & r))
+		b >>= 1;
+	if (b == r)
+		return r;
+
+	for (;;) {
+		while (!(a & r))
+			a >>= 1;
+		if (a == r)
+			return r;
+		if (a == b)
+			return a;
+
+		if (a < b)
+			swap(a, b);
+		a -= b;
+		a >>= 1;
+		if (a & r)
+			a += b;
+		a >>= 1;
+	}
+}
+
+#endif
+
 EXPORT_SYMBOL_GPL(gcd);
_

Patches currently in -mm which might be from zhaoxiu.zeng@xxxxxxxxx are

lib-gcd-use-binary-gcd-algorithm-instead-of-euclidean.patch

--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies FAQ]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux