The patch titled
Subject: zram: try vmalloc() after kmalloc()
has been removed from the -mm tree. Its filename was
zram-try-vmalloc-after-kmalloc.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
From: Kyeongdon Kim <kyeongdon.kim@xxxxxxx>
Subject: zram: try vmalloc() after kmalloc()
When we're using LZ4 multi compression streams for zram swap, we found out
page allocation failure message in system running test. That was not only
once, but a few(2 - 5 times per test). Also, some failure cases were
continually occurring to try allocation order 3.
In order to make parallel compression private data, we should call
kzalloc() with order 2/3 in runtime(lzo/lz4). But if there is no order
2/3 size memory to allocate in that time, page allocation fails. This
patch makes to use vmalloc() as fallback of kmalloc(), this prevents page
alloc failure warning.
After using this, we never found warning message in running test, also It
could reduce process startup latency about 60-120ms in each case.
For reference a call trace :
Binder_1: page allocation failure: order:3, mode:0x10c0d0
CPU: 0 PID: 424 Comm: Binder_1 Tainted: GW 3.10.49-perf-g991d02b-dirty #20
Call trace:
[<ffffffc0002069c8>] dump_backtrace+0x0/0x270
[<ffffffc000206c48>] show_stack+0x10/0x1c
[<ffffffc000cb51c8>] dump_stack+0x1c/0x28
[<ffffffc0002bbfc8>] warn_alloc_failed+0xfc/0x11c
[<ffffffc0002bf518>] __alloc_pages_nodemask+0x724/0x7f0
[<ffffffc0002bf5f8>] __get_free_pages+0x14/0x5c
[<ffffffc0002ed6a4>] kmalloc_order_trace+0x38/0xd8
[<ffffffc0005d9738>] zcomp_lz4_create+0x2c/0x38
[<ffffffc0005d78f0>] zcomp_strm_alloc+0x34/0x78
[<ffffffc0005d7a58>] zcomp_strm_multi_find+0x124/0x1ec
[<ffffffc0005d7c14>] zcomp_strm_find+0xc/0x18
[<ffffffc0005d8fa0>] zram_bvec_rw+0x2fc/0x780
[<ffffffc0005d9680>] zram_make_request+0x25c/0x2d4
[<ffffffc00040f8ac>] generic_make_request+0x80/0xbc
[<ffffffc00040f98c>] submit_bio+0xa4/0x15c
[<ffffffc0002e8bb0>] __swap_writepage+0x218/0x230
[<ffffffc0002e8c04>] swap_writepage+0x3c/0x4c
[<ffffffc0002c7384>] shrink_page_list+0x51c/0x8d0
[<ffffffc0002c7e88>] shrink_inactive_list+0x3f8/0x60c
[<ffffffc0002c86c8>] shrink_lruvec+0x33c/0x4cc
[<ffffffc0002c8894>] shrink_zone+0x3c/0x100
[<ffffffc0002c8c10>] try_to_free_pages+0x2b8/0x54c
[<ffffffc0002bf308>] __alloc_pages_nodemask+0x514/0x7f0
[<ffffffc0002bf5f8>] __get_free_pages+0x14/0x5c
[<ffffffc0003446cc>] proc_info_read+0x50/0xe4
[<ffffffc0002f5204>] vfs_read+0xa0/0x12c
[<ffffffc0002f59c8>] SyS_read+0x44/0x74
DMA: 3397*4kB (MC) 26*8kB (RC) 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB
0*512kB 0*1024kB 0*2048kB 0*4096kB = 13796kB
[minchan@xxxxxxxxxx: change vmalloc gfp and adding comment about gfp]
[sergey.senozhatsky@xxxxxxxxx: tweak comments and styles]
Signed-off-by: Kyeongdon Kim <kyeongdon.kim@xxxxxxx>
Signed-off-by: Minchan Kim <minchan@xxxxxxxxxx>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@xxxxxxxxx>
Sergey Senozhatsky <sergey.senozhatsky.work@xxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/block/zram/zcomp_lz4.c | 23 +++++++++++++++++++++--
drivers/block/zram/zcomp_lzo.c | 23 +++++++++++++++++++++--
2 files changed, 42 insertions(+), 4 deletions(-)
diff -puN drivers/block/zram/zcomp_lz4.c~zram-try-vmalloc-after-kmalloc drivers/block/zram/zcomp_lz4.c
--- a/drivers/block/zram/zcomp_lz4.c~zram-try-vmalloc-after-kmalloc
+++ a/drivers/block/zram/zcomp_lz4.c
@@ -10,17 +10,36 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/lz4.h>
+#include <linux/vmalloc.h>
+#include <linux/mm.h>
#include "zcomp_lz4.h"
static void *zcomp_lz4_create(void)
{
- return kzalloc(LZ4_MEM_COMPRESS, GFP_NOIO);
+ void *ret;
+
+ /*
+ * This function can be called in swapout/fs write path
+ * so we can't use GFP_FS|IO. And it assumes we already
+ * have at least one stream in zram initialization so we
+ * don't do best effort to allocate more stream in here.
+ * A default stream will work well without further multiple
+ * streams. That's why we use NORETRY | NOWARN.
+ */
+ ret = kzalloc(LZ4_MEM_COMPRESS, GFP_NOIO | __GFP_NORETRY |
+ __GFP_NOWARN);
+ if (!ret)
+ ret = __vmalloc(LZ4_MEM_COMPRESS,
+ GFP_NOIO | __GFP_NORETRY | __GFP_NOWARN |
+ __GFP_ZERO | __GFP_HIGHMEM,
+ PAGE_KERNEL);
+ return ret;
}
static void zcomp_lz4_destroy(void *private)
{
- kfree(private);
+ kvfree(private);
}
static int zcomp_lz4_compress(const unsigned char *src, unsigned char *dst,
diff -puN drivers/block/zram/zcomp_lzo.c~zram-try-vmalloc-after-kmalloc drivers/block/zram/zcomp_lzo.c
--- a/drivers/block/zram/zcomp_lzo.c~zram-try-vmalloc-after-kmalloc
+++ a/drivers/block/zram/zcomp_lzo.c
@@ -10,17 +10,36 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/lzo.h>
+#include <linux/vmalloc.h>
+#include <linux/mm.h>
#include "zcomp_lzo.h"
static void *lzo_create(void)
{
- return kzalloc(LZO1X_MEM_COMPRESS, GFP_NOIO);
+ void *ret;
+
+ /*
+ * This function can be called in swapout/fs write path
+ * so we can't use GFP_FS|IO. And it assumes we already
+ * have at least one stream in zram initialization so we
+ * don't do best effort to allocate more stream in here.
+ * A default stream will work well without further multiple
+ * streams. That's why we use NORETRY | NOWARN.
+ */
+ ret = kzalloc(LZO1X_MEM_COMPRESS, GFP_NOIO | __GFP_NORETRY |
+ __GFP_NOWARN);
+ if (!ret)
+ ret = __vmalloc(LZO1X_MEM_COMPRESS,
+ GFP_NOIO | __GFP_NORETRY | __GFP_NOWARN |
+ __GFP_ZERO | __GFP_HIGHMEM,
+ PAGE_KERNEL);
+ return ret;
}
static void lzo_destroy(void *private)
{
- kfree(private);
+ kvfree(private);
}
static int lzo_compress(const unsigned char *src, unsigned char *dst,
_
Patches currently in -mm which might be from kyeongdon.kim@xxxxxxx are
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
