The patch titled
Subject: memblock: introduce a for_each_reserved_mem_region iterator
has been removed from the -mm tree. Its filename was
memblock-introduce-a-for_each_reserved_mem_region-iterator.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
From: Robin Holt <holt@xxxxxxx>
Subject: memblock: introduce a for_each_reserved_mem_region iterator
Struct page initialisation had been identified as one of the reasons why
large machines take a long time to boot. Patches were posted a long time ago
to defer initialisation until they were first used. This was rejected on
the grounds it should not be necessary to hurt the fast paths. This series
reuses much of the work from that time but defers the initialisation of
memory to kswapd so that one thread per node initialises memory local to
that node.
After applying the series and setting the appropriate Kconfig variable I
see this in the boot log on a 64G machine
[ 7.383764] kswapd 0 initialised deferred memory in 188ms
[ 7.404253] kswapd 1 initialised deferred memory in 208ms
[ 7.411044] kswapd 3 initialised deferred memory in 216ms
[ 7.411551] kswapd 2 initialised deferred memory in 216ms
On a 1TB machine, I see
[ 8.406511] kswapd 3 initialised deferred memory in 1116ms
[ 8.428518] kswapd 1 initialised deferred memory in 1140ms
[ 8.435977] kswapd 0 initialised deferred memory in 1148ms
[ 8.437416] kswapd 2 initialised deferred memory in 1148ms
Once booted the machine appears to work as normal. Boot times were measured
from the time shutdown was called until ssh was available again. In the
64G case, the boot time savings are negligible. On the 1TB machine, the
savings were 16 seconds.
Nate Zimmer said:
: On an older 8 TB box with lots and lots of cpus the boot time, as
: measure from grub to login prompt, the boot time improved from 1484
: seconds to exactly 1000 seconds.
Waiman Long said:
: I ran a bootup timing test on a 12-TB 16-socket IvyBridge-EX system. From
: grub menu to ssh login, the bootup time was 453s before the patch and 265s
: after the patch - a saving of 188s (42%).
Daniel Blueman said:
: On a 7TB, 1728-core NumaConnect system with 108 NUMA nodes, we're seeing
: stock 4.0 boot in 7136s. This drops to 2159s, or a 70% reduction with
: this patchset. Non-temporal PMD init (https://lkml.org/lkml/2015/4/23/350)
: drops this to 1045s.
This patch (of 13):
As part of initializing struct page's in 2MiB chunks, we noticed that at
the end of free_all_bootmem(), there was nothing which had forced the
reserved/allocated 4KiB pages to be initialized.
This helper function will be used for that expansion.
Signed-off-by: Robin Holt <holt@xxxxxxx>
Signed-off-by: Nate Zimmer <nzimmer@xxxxxxx>
Signed-off-by: Mel Gorman <mgorman@xxxxxxx>
Tested-by: Nate Zimmer <nzimmer@xxxxxxx>
Tested-by: Waiman Long <waiman.long@xxxxxx>
Tested-by: Daniel J Blueman <daniel@xxxxxxxxxxxxx>
Acked-by: Pekka Enberg <penberg@xxxxxxxxxx>
Cc: Robin Holt <robinmholt@xxxxxxxxx>
Cc: Dave Hansen <dave.hansen@xxxxxxxxx>
Cc: Waiman Long <waiman.long@xxxxxx>
Cc: Scott Norton <scott.norton@xxxxxx>
Cc: "Luck, Tony" <tony.luck@xxxxxxxxx>
Cc: Ingo Molnar <mingo@xxxxxxx>
Cc: "H. Peter Anvin" <hpa@xxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
include/linux/memblock.h | 18 ++++++++++++++++++
mm/memblock.c | 32 ++++++++++++++++++++++++++++++++
2 files changed, 50 insertions(+)
diff -puN include/linux/memblock.h~memblock-introduce-a-for_each_reserved_mem_region-iterator include/linux/memblock.h
--- a/include/linux/memblock.h~memblock-introduce-a-for_each_reserved_mem_region-iterator
+++ a/include/linux/memblock.h
@@ -101,6 +101,9 @@ void __next_mem_range_rev(u64 *idx, int
struct memblock_type *type_b, phys_addr_t *out_start,
phys_addr_t *out_end, int *out_nid);
+void __next_reserved_mem_region(u64 *idx, phys_addr_t *out_start,
+ phys_addr_t *out_end);
+
/**
* for_each_mem_range - iterate through memblock areas from type_a and not
* included in type_b. Or just type_a if type_b is NULL.
@@ -142,6 +145,21 @@ void __next_mem_range_rev(u64 *idx, int
__next_mem_range_rev(&i, nid, flags, type_a, type_b, \
p_start, p_end, p_nid))
+/**
+ * for_each_reserved_mem_region - iterate over all reserved memblock areas
+ * @i: u64 used as loop variable
+ * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
+ * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
+ *
+ * Walks over reserved areas of memblock. Available as soon as memblock
+ * is initialized.
+ */
+#define for_each_reserved_mem_region(i, p_start, p_end) \
+ for (i = 0UL, \
+ __next_reserved_mem_region(&i, p_start, p_end); \
+ i != (u64)ULLONG_MAX; \
+ __next_reserved_mem_region(&i, p_start, p_end))
+
#ifdef CONFIG_MOVABLE_NODE
static inline bool memblock_is_hotpluggable(struct memblock_region *m)
{
diff -puN mm/memblock.c~memblock-introduce-a-for_each_reserved_mem_region-iterator mm/memblock.c
--- a/mm/memblock.c~memblock-introduce-a-for_each_reserved_mem_region-iterator
+++ a/mm/memblock.c
@@ -820,6 +820,38 @@ int __init_memblock memblock_mark_mirror
/**
+ * __next_reserved_mem_region - next function for for_each_reserved_region()
+ * @idx: pointer to u64 loop variable
+ * @out_start: ptr to phys_addr_t for start address of the region, can be %NULL
+ * @out_end: ptr to phys_addr_t for end address of the region, can be %NULL
+ *
+ * Iterate over all reserved memory regions.
+ */
+void __init_memblock __next_reserved_mem_region(u64 *idx,
+ phys_addr_t *out_start,
+ phys_addr_t *out_end)
+{
+ struct memblock_type *rsv = &memblock.reserved;
+
+ if (*idx >= 0 && *idx < rsv->cnt) {
+ struct memblock_region *r = &rsv->regions[*idx];
+ phys_addr_t base = r->base;
+ phys_addr_t size = r->size;
+
+ if (out_start)
+ *out_start = base;
+ if (out_end)
+ *out_end = base + size - 1;
+
+ *idx += 1;
+ return;
+ }
+
+ /* signal end of iteration */
+ *idx = ULLONG_MAX;
+}
+
+/**
* __next__mem_range - next function for for_each_free_mem_range() etc.
* @idx: pointer to u64 loop variable
* @nid: node selector, %NUMA_NO_NODE for all nodes
_
Patches currently in -mm which might be from holt@xxxxxxx are
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
