The patch titled
Subject: prctl: more prctl(PR_SET_MM_*) checks
has been removed from the -mm tree. Its filename was
prctl-more-prctlpr_set_mm_-checks.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
From: Alexey Dobriyan <adobriyan@xxxxxxxxx>
Subject: prctl: more prctl(PR_SET_MM_*) checks
Individual prctl(PR_SET_MM_*) calls do some checking to maintain a
consistent view of mm->arg_start et al fields, but not enough. In
particular
PR_SET_MM_ARG_START/PR_SET_MM_ARG_END/PR_SET_MM_ENV_START/PR_SET_MM_ENV_END
only check that the address lies in an existing VMA, but don't check that
the start address is lower than the end address _at all_.
Consolidate all consistency checks, so there will be no difference in the
future between PR_SET_MM_MAP and individual PR_SET_MM_* calls.
The program below makes both ARGV and ENVP areas be reversed. It makes
/proc/$PID/cmdline show garbage (it doesn't oops by luck).
#include <sys/mman.h>
#include <sys/prctl.h>
#include <unistd.h>
enum {PAGE_SIZE=4096};
int main(void)
{
void *p;
p = mmap(NULL, PAGE_SIZE, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
#define PR_SET_MM 35
#define PR_SET_MM_ARG_START 8
#define PR_SET_MM_ARG_END 9
#define PR_SET_MM_ENV_START 10
#define PR_SET_MM_ENV_END 11
prctl(PR_SET_MM, PR_SET_MM_ARG_START, (unsigned long)p + PAGE_SIZE - 1, 0, 0);
prctl(PR_SET_MM, PR_SET_MM_ARG_END, (unsigned long)p, 0, 0);
prctl(PR_SET_MM, PR_SET_MM_ENV_START, (unsigned long)p + PAGE_SIZE - 1, 0, 0);
prctl(PR_SET_MM, PR_SET_MM_ENV_END, (unsigned long)p, 0, 0);
pause();
return 0;
}
[akpm@xxxxxxxxxxxxxxxxxxxx: tidy code, tweak comment]
Signed-off-by: Alexey Dobriyan <adobriyan@xxxxxxxxx>
Acked-by: Cyrill Gorcunov <gorcunov@xxxxxxxxxx>
Cc: Jarod Wilson <jarod@xxxxxxxxxx>
Cc: Jan Stancek <jstancek@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
kernel/sys.c | 158 ++++++++++++++++++++++++++++---------------------
1 file changed, 91 insertions(+), 67 deletions(-)
diff -puN kernel/sys.c~prctl-more-prctlpr_set_mm_-checks kernel/sys.c
--- a/kernel/sys.c~prctl-more-prctlpr_set_mm_-checks
+++ a/kernel/sys.c
@@ -1722,7 +1722,6 @@ exit_err:
goto exit;
}
-#ifdef CONFIG_CHECKPOINT_RESTORE
/*
* WARNING: we don't require any capability here so be very careful
* in what is allowed for modification from userspace.
@@ -1818,6 +1817,7 @@ out:
return error;
}
+#ifdef CONFIG_CHECKPOINT_RESTORE
static int prctl_set_mm_map(int opt, const void __user *addr, unsigned long data_size)
{
struct prctl_mm_map prctl_map = { .exe_fd = (u32)-1, };
@@ -1902,10 +1902,41 @@ out:
}
#endif /* CONFIG_CHECKPOINT_RESTORE */
+static int prctl_set_auxv(struct mm_struct *mm, unsigned long addr,
+ unsigned long len)
+{
+ /*
+ * This doesn't move the auxiliary vector itself since it's pinned to
+ * mm_struct, but it permits filling the vector with new values. It's
+ * up to the caller to provide sane values here, otherwise userspace
+ * tools which use this vector might be unhappy.
+ */
+ unsigned long user_auxv[AT_VECTOR_SIZE];
+
+ if (len > sizeof(user_auxv))
+ return -EINVAL;
+
+ if (copy_from_user(user_auxv, (const void __user *)addr, len))
+ return -EFAULT;
+
+ /* Make sure the last entry is always AT_NULL */
+ user_auxv[AT_VECTOR_SIZE - 2] = 0;
+ user_auxv[AT_VECTOR_SIZE - 1] = 0;
+
+ BUILD_BUG_ON(sizeof(user_auxv) != sizeof(mm->saved_auxv));
+
+ task_lock(current);
+ memcpy(mm->saved_auxv, user_auxv, len);
+ task_unlock(current);
+
+ return 0;
+}
+
static int prctl_set_mm(int opt, unsigned long addr,
unsigned long arg4, unsigned long arg5)
{
struct mm_struct *mm = current->mm;
+ struct prctl_mm_map prctl_map;
struct vm_area_struct *vma;
int error;
@@ -1925,6 +1956,9 @@ static int prctl_set_mm(int opt, unsigne
if (opt == PR_SET_MM_EXE_FILE)
return prctl_set_mm_exe_file(mm, (unsigned int)addr);
+ if (opt == PR_SET_MM_AUXV)
+ return prctl_set_auxv(mm, addr, arg4);
+
if (addr >= TASK_SIZE || addr < mmap_min_addr)
return -EINVAL;
@@ -1933,42 +1967,64 @@ static int prctl_set_mm(int opt, unsigne
down_read(&mm->mmap_sem);
vma = find_vma(mm, addr);
+ prctl_map.start_code = mm->start_code;
+ prctl_map.end_code = mm->end_code;
+ prctl_map.start_data = mm->start_data;
+ prctl_map.end_data = mm->end_data;
+ prctl_map.start_brk = mm->start_brk;
+ prctl_map.brk = mm->brk;
+ prctl_map.start_stack = mm->start_stack;
+ prctl_map.arg_start = mm->arg_start;
+ prctl_map.arg_end = mm->arg_end;
+ prctl_map.env_start = mm->env_start;
+ prctl_map.env_end = mm->env_end;
+ prctl_map.auxv = NULL;
+ prctl_map.auxv_size = 0;
+ prctl_map.exe_fd = -1;
+
switch (opt) {
case PR_SET_MM_START_CODE:
- mm->start_code = addr;
+ prctl_map.start_code = addr;
break;
case PR_SET_MM_END_CODE:
- mm->end_code = addr;
+ prctl_map.end_code = addr;
break;
case PR_SET_MM_START_DATA:
- mm->start_data = addr;
+ prctl_map.start_data = addr;
break;
case PR_SET_MM_END_DATA:
- mm->end_data = addr;
+ prctl_map.end_data = addr;
+ break;
+ case PR_SET_MM_START_STACK:
+ prctl_map.start_stack = addr;
break;
-
case PR_SET_MM_START_BRK:
- if (addr <= mm->end_data)
- goto out;
-
- if (check_data_rlimit(rlimit(RLIMIT_DATA), mm->brk, addr,
- mm->end_data, mm->start_data))
- goto out;
-
- mm->start_brk = addr;
+ prctl_map.start_brk = addr;
break;
-
case PR_SET_MM_BRK:
- if (addr <= mm->end_data)
- goto out;
-
- if (check_data_rlimit(rlimit(RLIMIT_DATA), addr, mm->start_brk,
- mm->end_data, mm->start_data))
- goto out;
-
- mm->brk = addr;
+ prctl_map.brk = addr;
+ break;
+ case PR_SET_MM_ARG_START:
+ prctl_map.arg_start = addr;
+ break;
+ case PR_SET_MM_ARG_END:
+ prctl_map.arg_end = addr;
+ break;
+ case PR_SET_MM_ENV_START:
+ prctl_map.env_start = addr;
break;
+ case PR_SET_MM_ENV_END:
+ prctl_map.env_end = addr;
+ break;
+ default:
+ goto out;
+ }
+ error = validate_prctl_map(&prctl_map);
+ if (error)
+ goto out;
+
+ switch (opt) {
/*
* If command line arguments and environment
* are placed somewhere else on stack, we can
@@ -1985,52 +2041,20 @@ static int prctl_set_mm(int opt, unsigne
error = -EFAULT;
goto out;
}
- if (opt == PR_SET_MM_START_STACK)
- mm->start_stack = addr;
- else if (opt == PR_SET_MM_ARG_START)
- mm->arg_start = addr;
- else if (opt == PR_SET_MM_ARG_END)
- mm->arg_end = addr;
- else if (opt == PR_SET_MM_ENV_START)
- mm->env_start = addr;
- else if (opt == PR_SET_MM_ENV_END)
- mm->env_end = addr;
- break;
-
- /*
- * This doesn't move auxiliary vector itself
- * since it's pinned to mm_struct, but allow
- * to fill vector with new values. It's up
- * to a caller to provide sane values here
- * otherwise user space tools which use this
- * vector might be unhappy.
- */
- case PR_SET_MM_AUXV: {
- unsigned long user_auxv[AT_VECTOR_SIZE];
-
- if (arg4 > sizeof(user_auxv))
- goto out;
- up_read(&mm->mmap_sem);
-
- if (copy_from_user(user_auxv, (const void __user *)addr, arg4))
- return -EFAULT;
-
- /* Make sure the last entry is always AT_NULL */
- user_auxv[AT_VECTOR_SIZE - 2] = 0;
- user_auxv[AT_VECTOR_SIZE - 1] = 0;
-
- BUILD_BUG_ON(sizeof(user_auxv) != sizeof(mm->saved_auxv));
-
- task_lock(current);
- memcpy(mm->saved_auxv, user_auxv, arg4);
- task_unlock(current);
-
- return 0;
- }
- default:
- goto out;
}
+ mm->start_code = prctl_map.start_code;
+ mm->end_code = prctl_map.end_code;
+ mm->start_data = prctl_map.start_data;
+ mm->end_data = prctl_map.end_data;
+ mm->start_brk = prctl_map.start_brk;
+ mm->brk = prctl_map.brk;
+ mm->start_stack = prctl_map.start_stack;
+ mm->arg_start = prctl_map.arg_start;
+ mm->arg_end = prctl_map.arg_end;
+ mm->env_start = prctl_map.env_start;
+ mm->env_end = prctl_map.env_end;
+
error = 0;
out:
up_read(&mm->mmap_sem);
_
Patches currently in -mm which might be from adobriyan@xxxxxxxxx are
origin.patch
linux-next.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
