The patch titled
Subject: kconfig: use bool instead of boolean for type definition attributes
has been removed from the -mm tree. Its filename was
kconfig-use-bool-instead-of-boolean-for-type-definition-attributes.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
From: Christoph Jaeger <cj@xxxxxxxxx>
Subject: kconfig: use bool instead of boolean for type definition attributes
Support for keyword 'boolean' will be dropped later on.
No functional change.
See http://lkml.kernel.org/r/cover.1418003065.git.cj@xxxxxxxxx
Signed-off-by: Christoph Jaeger <cj@xxxxxxxxx>
Cc: Daniel Borkmann <dborkman@xxxxxxxxxx>
Cc: Joe Perches <joe@xxxxxxxxxxx>
Cc: Paul Bolle <pebolle@xxxxxxxxxx>
Cc: "Yann E. MORIN" <yann.morin.1998@xxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
arch/mips/pmcs-msp71xx/Kconfig | 6 ++--
drivers/connector/Kconfig | 2 -
drivers/hwmon/Kconfig | 2 -
drivers/hwmon/pmbus/Kconfig | 2 -
drivers/i2c/Kconfig | 4 +--
drivers/iio/Kconfig | 4 +--
drivers/isdn/hardware/mISDN/Kconfig | 2 -
drivers/md/Kconfig | 4 +--
drivers/md/persistent-data/Kconfig | 2 -
drivers/net/ethernet/ti/Kconfig | 4 +--
drivers/net/usb/Kconfig | 12 ++++-----
drivers/net/wireless/rt2x00/Kconfig | 6 ++--
drivers/pci/pcie/aer/Kconfig | 2 -
drivers/rtc/Kconfig | 8 +++---
drivers/spi/Kconfig | 6 ++--
drivers/staging/board/Kconfig | 2 -
drivers/staging/emxx_udc/Kconfig | 2 -
drivers/staging/iio/Kconfig | 4 +--
drivers/tty/serial/Kconfig | 2 -
drivers/usb/gadget/Kconfig | 34 +++++++++++++-------------
drivers/usb/gadget/legacy/Kconfig | 2 -
drivers/usb/gadget/udc/Kconfig | 4 +--
drivers/usb/phy/Kconfig | 2 -
init/Kconfig | 4 +--
lib/Kconfig | 30 +++++++++++-----------
mm/Kconfig | 22 ++++++++--------
net/Kconfig | 14 +++++-----
net/sched/Kconfig | 2 -
net/switchdev/Kconfig | 2 -
security/integrity/Kconfig | 4 +--
security/integrity/evm/Kconfig | 2 -
31 files changed, 99 insertions(+), 99 deletions(-)
diff -puN arch/mips/pmcs-msp71xx/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes arch/mips/pmcs-msp71xx/Kconfig
--- a/arch/mips/pmcs-msp71xx/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/arch/mips/pmcs-msp71xx/Kconfig
@@ -36,14 +36,14 @@ config PMC_MSP7120_FPGA
endchoice
config MSP_HAS_USB
- boolean
+ bool
depends on PMC_MSP
config MSP_ETH
- boolean
+ bool
select MSP_HAS_MAC
depends on PMC_MSP
config MSP_HAS_MAC
- boolean
+ bool
depends on PMC_MSP
diff -puN drivers/connector/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes drivers/connector/Kconfig
--- a/drivers/connector/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/drivers/connector/Kconfig
@@ -12,7 +12,7 @@ menuconfig CONNECTOR
if CONNECTOR
config PROC_EVENTS
- boolean "Report process events to userspace"
+ bool "Report process events to userspace"
depends on CONNECTOR=y
default y
---help---
diff -puN drivers/hwmon/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes drivers/hwmon/Kconfig
--- a/drivers/hwmon/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/drivers/hwmon/Kconfig
@@ -1595,7 +1595,7 @@ config SENSORS_W83795
will be called w83795.
config SENSORS_W83795_FANCTRL
- boolean "Include automatic fan control support (DANGEROUS)"
+ bool "Include automatic fan control support (DANGEROUS)"
depends on SENSORS_W83795
default n
help
diff -puN drivers/hwmon/pmbus/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes drivers/hwmon/pmbus/Kconfig
--- a/drivers/hwmon/pmbus/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/drivers/hwmon/pmbus/Kconfig
@@ -57,7 +57,7 @@ config SENSORS_LTC2978
be called ltc2978.
config SENSORS_LTC2978_REGULATOR
- boolean "Regulator support for LTC2978 and compatibles"
+ bool "Regulator support for LTC2978 and compatibles"
depends on SENSORS_LTC2978 && REGULATOR
help
If you say yes here you get regulator support for Linear
diff -puN drivers/i2c/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes drivers/i2c/Kconfig
--- a/drivers/i2c/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/drivers/i2c/Kconfig
@@ -35,11 +35,11 @@ config ACPI_I2C_OPREGION
if I2C
config I2C_BOARDINFO
- boolean
+ bool
default y
config I2C_COMPAT
- boolean "Enable compatibility bits for old user-space"
+ bool "Enable compatibility bits for old user-space"
default y
help
Say Y here if you intend to run lm-sensors 3.1.1 or older, or any
diff -puN drivers/iio/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes drivers/iio/Kconfig
--- a/drivers/iio/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/drivers/iio/Kconfig
@@ -21,7 +21,7 @@ config IIO_BUFFER
if IIO_BUFFER
config IIO_BUFFER_CB
-boolean "IIO callback buffer used for push in-kernel interfaces"
+ bool "IIO callback buffer used for push in-kernel interfaces"
help
Should be selected by any drivers that do in-kernel push
usage. That is, those where the data is pushed to the consumer.
@@ -44,7 +44,7 @@ config IIO_TRIGGERED_BUFFER
endif # IIO_BUFFER
config IIO_TRIGGER
- boolean "Enable triggered sampling support"
+ bool "Enable triggered sampling support"
help
Provides IIO core support for triggers. Currently these
are used to initialize capture of samples to push into
diff -puN drivers/isdn/hardware/mISDN/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes drivers/isdn/hardware/mISDN/Kconfig
--- a/drivers/isdn/hardware/mISDN/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/drivers/isdn/hardware/mISDN/Kconfig
@@ -24,7 +24,7 @@ config MISDN_HFCMULTI
* HFC-E1 (E1 interface for 2Mbit ISDN)
config MISDN_HFCMULTI_8xx
- boolean "Support for XHFC embedded board in HFC multiport driver"
+ bool "Support for XHFC embedded board in HFC multiport driver"
depends on MISDN
depends on MISDN_HFCMULTI
depends on 8xx
diff -puN drivers/md/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes drivers/md/Kconfig
--- a/drivers/md/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/drivers/md/Kconfig
@@ -177,7 +177,7 @@ config MD_FAULTY
source "drivers/md/bcache/Kconfig"
config BLK_DEV_DM_BUILTIN
- boolean
+ bool
config BLK_DEV_DM
tristate "Device mapper support"
@@ -196,7 +196,7 @@ config BLK_DEV_DM
If unsure, say N.
config DM_DEBUG
- boolean "Device mapper debugging support"
+ bool "Device mapper debugging support"
depends on BLK_DEV_DM
---help---
Enable this for messages that may help debug device-mapper problems.
diff -puN drivers/md/persistent-data/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes drivers/md/persistent-data/Kconfig
--- a/drivers/md/persistent-data/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/drivers/md/persistent-data/Kconfig
@@ -8,7 +8,7 @@ config DM_PERSISTENT_DATA
device-mapper targets such as the thin provisioning target.
config DM_DEBUG_BLOCK_STACK_TRACING
- boolean "Keep stack trace of persistent data block lock holders"
+ bool "Keep stack trace of persistent data block lock holders"
depends on STACKTRACE_SUPPORT && DM_PERSISTENT_DATA
select STACKTRACE
---help---
diff -puN drivers/net/ethernet/ti/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes drivers/net/ethernet/ti/Kconfig
--- a/drivers/net/ethernet/ti/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/drivers/net/ethernet/ti/Kconfig
@@ -50,7 +50,7 @@ config TI_DAVINCI_CPDMA
will be called davinci_cpdma. This is recommended.
config TI_CPSW_PHY_SEL
- boolean "TI CPSW Switch Phy sel Support"
+ bool "TI CPSW Switch Phy sel Support"
depends on TI_CPSW
---help---
This driver supports configuring of the phy mode connected to
@@ -71,7 +71,7 @@ config TI_CPSW
will be called cpsw.
config TI_CPTS
- boolean "TI Common Platform Time Sync (CPTS) Support"
+ bool "TI Common Platform Time Sync (CPTS) Support"
depends on TI_CPSW
select PTP_1588_CLOCK
---help---
diff -puN drivers/net/usb/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes drivers/net/usb/Kconfig
--- a/drivers/net/usb/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/drivers/net/usb/Kconfig
@@ -397,14 +397,14 @@ config USB_NET_CDC_SUBSET
not generally have permanently assigned Ethernet addresses.
config USB_ALI_M5632
- boolean "ALi M5632 based 'USB 2.0 Data Link' cables"
+ bool "ALi M5632 based 'USB 2.0 Data Link' cables"
depends on USB_NET_CDC_SUBSET
help
Choose this option if you're using a host-to-host cable
based on this design, which supports USB 2.0 high speed.
config USB_AN2720
- boolean "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
+ bool "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
depends on USB_NET_CDC_SUBSET
help
Choose this option if you're using a host-to-host cable
@@ -412,7 +412,7 @@ config USB_AN2720
Cypress brand.
config USB_BELKIN
- boolean "eTEK based host-to-host cables (Advance, Belkin, ...)"
+ bool "eTEK based host-to-host cables (Advance, Belkin, ...)"
depends on USB_NET_CDC_SUBSET
default y
help
@@ -421,7 +421,7 @@ config USB_BELKIN
microcontroller, with LEDs that indicate traffic.
config USB_ARMLINUX
- boolean "Embedded ARM Linux links (iPaq, ...)"
+ bool "Embedded ARM Linux links (iPaq, ...)"
depends on USB_NET_CDC_SUBSET
default y
help
@@ -438,14 +438,14 @@ config USB_ARMLINUX
this simpler protocol by installing a different kernel.
config USB_EPSON2888
- boolean "Epson 2888 based firmware (DEVELOPMENT)"
+ bool "Epson 2888 based firmware (DEVELOPMENT)"
depends on USB_NET_CDC_SUBSET
help
Choose this option to support the usb networking links used
by some sample firmware from Epson.
config USB_KC2190
- boolean "KT Technology KC2190 based cables (InstaNet)"
+ bool "KT Technology KC2190 based cables (InstaNet)"
depends on USB_NET_CDC_SUBSET
help
Choose this option if you're using a host-to-host cable
diff -puN drivers/net/wireless/rt2x00/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes drivers/net/wireless/rt2x00/Kconfig
--- a/drivers/net/wireless/rt2x00/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/drivers/net/wireless/rt2x00/Kconfig
@@ -243,14 +243,14 @@ config RT2X00_LIB
select AVERAGE
config RT2X00_LIB_FIRMWARE
- boolean
+ bool
select FW_LOADER
config RT2X00_LIB_CRYPTO
- boolean
+ bool
config RT2X00_LIB_LEDS
- boolean
+ bool
default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
config RT2X00_LIB_DEBUGFS
diff -puN drivers/pci/pcie/aer/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes drivers/pci/pcie/aer/Kconfig
--- a/drivers/pci/pcie/aer/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/drivers/pci/pcie/aer/Kconfig
@@ -3,7 +3,7 @@
#
config PCIEAER
- boolean "Root Port Advanced Error Reporting support"
+ bool "Root Port Advanced Error Reporting support"
depends on PCIEPORTBUS
select RAS
default y
diff -puN drivers/rtc/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes drivers/rtc/Kconfig
--- a/drivers/rtc/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/drivers/rtc/Kconfig
@@ -65,7 +65,7 @@ config RTC_DEBUG
comment "RTC interfaces"
config RTC_INTF_SYSFS
- boolean "/sys/class/rtc/rtcN (sysfs)"
+ bool "/sys/class/rtc/rtcN (sysfs)"
depends on SYSFS
default RTC_CLASS
help
@@ -75,7 +75,7 @@ config RTC_INTF_SYSFS
If unsure, say Y.
config RTC_INTF_PROC
- boolean "/proc/driver/rtc (procfs for rtcN)"
+ bool "/proc/driver/rtc (procfs for rtcN)"
depends on PROC_FS
default RTC_CLASS
help
@@ -88,7 +88,7 @@ config RTC_INTF_PROC
If unsure, say Y.
config RTC_INTF_DEV
- boolean "/dev/rtcN (character devices)"
+ bool "/dev/rtcN (character devices)"
default RTC_CLASS
help
Say yes here if you want to use your RTCs using the /dev
@@ -455,7 +455,7 @@ config RTC_DRV_DM355EVM
Supports the RTC firmware in the MSP430 on the DM355 EVM.
config RTC_DRV_TWL92330
- boolean "TI TWL92330/Menelaus"
+ bool "TI TWL92330/Menelaus"
depends on MENELAUS
help
If you say yes here you get support for the RTC on the
diff -puN drivers/spi/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes drivers/spi/Kconfig
--- a/drivers/spi/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/drivers/spi/Kconfig
@@ -29,7 +29,7 @@ menuconfig SPI
if SPI
config SPI_DEBUG
- boolean "Debug support for SPI drivers"
+ bool "Debug support for SPI drivers"
depends on DEBUG_KERNEL
help
Say "yes" to enable debug messaging (like dev_dbg and pr_debug),
@@ -40,8 +40,8 @@ config SPI_DEBUG
#
config SPI_MASTER
-# boolean "SPI Master Support"
- boolean
+# bool "SPI Master Support"
+ bool
default SPI
help
If your system has an master-capable SPI controller (which
diff -puN drivers/staging/board/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes drivers/staging/board/Kconfig
--- a/drivers/staging/board/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/drivers/staging/board/Kconfig
@@ -1,5 +1,5 @@
config STAGING_BOARD
- boolean "Staging Board Support"
+ bool "Staging Board Support"
depends on OF_ADDRESS
depends on BROKEN
help
diff -puN drivers/staging/emxx_udc/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes drivers/staging/emxx_udc/Kconfig
--- a/drivers/staging/emxx_udc/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/drivers/staging/emxx_udc/Kconfig
@@ -1,5 +1,5 @@
config USB_EMXX
- boolean "EMXX USB Function Device Controller"
+ bool "EMXX USB Function Device Controller"
depends on USB_GADGET && (ARCH_SHMOBILE || (ARM && COMPILE_TEST))
help
The Emma Mobile series of SoCs from Renesas Electronics and
diff -puN drivers/staging/iio/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes drivers/staging/iio/Kconfig
--- a/drivers/staging/iio/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/drivers/staging/iio/Kconfig
@@ -30,13 +30,13 @@ config IIO_SIMPLE_DUMMY
if IIO_SIMPLE_DUMMY
config IIO_SIMPLE_DUMMY_EVENTS
- boolean "Event generation support"
+ bool "Event generation support"
select IIO_DUMMY_EVGEN
help
Add some dummy events to the simple dummy driver.
config IIO_SIMPLE_DUMMY_BUFFER
- boolean "Buffered capture support"
+ bool "Buffered capture support"
select IIO_BUFFER
select IIO_KFIFO_BUF
help
diff -puN drivers/tty/serial/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes drivers/tty/serial/Kconfig
--- a/drivers/tty/serial/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/drivers/tty/serial/Kconfig
@@ -498,7 +498,7 @@ config SERIAL_MFD_HSU
select SERIAL_CORE
config SERIAL_MFD_HSU_CONSOLE
- boolean "Medfile HSU serial console support"
+ bool "Medfile HSU serial console support"
depends on SERIAL_MFD_HSU=y
select SERIAL_CORE_CONSOLE
diff -puN drivers/usb/gadget/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes drivers/usb/gadget/Kconfig
--- a/drivers/usb/gadget/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/drivers/usb/gadget/Kconfig
@@ -45,7 +45,7 @@ menuconfig USB_GADGET
if USB_GADGET
config USB_GADGET_DEBUG
- boolean "Debugging messages (DEVELOPMENT)"
+ bool "Debugging messages (DEVELOPMENT)"
depends on DEBUG_KERNEL
help
Many controller and gadget drivers will print some debugging
@@ -73,7 +73,7 @@ config USB_GADGET_VERBOSE
production build.
config USB_GADGET_DEBUG_FILES
- boolean "Debugging information files (DEVELOPMENT)"
+ bool "Debugging information files (DEVELOPMENT)"
depends on PROC_FS
help
Some of the drivers in the "gadget" framework can expose
@@ -84,7 +84,7 @@ config USB_GADGET_DEBUG_FILES
here. If in doubt, or to conserve kernel memory, say "N".
config USB_GADGET_DEBUG_FS
- boolean "Debugging information files in debugfs (DEVELOPMENT)"
+ bool "Debugging information files in debugfs (DEVELOPMENT)"
depends on DEBUG_FS
help
Some of the drivers in the "gadget" framework can expose
@@ -230,7 +230,7 @@ config USB_CONFIGFS
For more information see Documentation/usb/gadget_configfs.txt.
config USB_CONFIGFS_SERIAL
- boolean "Generic serial bulk in/out"
+ bool "Generic serial bulk in/out"
depends on USB_CONFIGFS
depends on TTY
select USB_U_SERIAL
@@ -239,7 +239,7 @@ config USB_CONFIGFS_SERIAL
The function talks to the Linux-USB generic serial driver.
config USB_CONFIGFS_ACM
- boolean "Abstract Control Model (CDC ACM)"
+ bool "Abstract Control Model (CDC ACM)"
depends on USB_CONFIGFS
depends on TTY
select USB_U_SERIAL
@@ -249,7 +249,7 @@ config USB_CONFIGFS_ACM
MS-Windows hosts or with the Linux-USB "cdc-acm" driver.
config USB_CONFIGFS_OBEX
- boolean "Object Exchange Model (CDC OBEX)"
+ bool "Object Exchange Model (CDC OBEX)"
depends on USB_CONFIGFS
depends on TTY
select USB_U_SERIAL
@@ -259,7 +259,7 @@ config USB_CONFIGFS_OBEX
since the kernel itself doesn't implement the OBEX protocol.
config USB_CONFIGFS_NCM
- boolean "Network Control Model (CDC NCM)"
+ bool "Network Control Model (CDC NCM)"
depends on USB_CONFIGFS
depends on NET
select USB_U_ETHER
@@ -270,7 +270,7 @@ config USB_CONFIGFS_NCM
different alignment possibilities.
config USB_CONFIGFS_ECM
- boolean "Ethernet Control Model (CDC ECM)"
+ bool "Ethernet Control Model (CDC ECM)"
depends on USB_CONFIGFS
depends on NET
select USB_U_ETHER
@@ -282,7 +282,7 @@ config USB_CONFIGFS_ECM
supported by firmware for smart network devices.
config USB_CONFIGFS_ECM_SUBSET
- boolean "Ethernet Control Model (CDC ECM) subset"
+ bool "Ethernet Control Model (CDC ECM) subset"
depends on USB_CONFIGFS
depends on NET
select USB_U_ETHER
@@ -323,7 +323,7 @@ config USB_CONFIGFS_EEM
the host is the same (a usbX device), so the differences are minimal.
config USB_CONFIGFS_PHONET
- boolean "Phonet protocol"
+ bool "Phonet protocol"
depends on USB_CONFIGFS
depends on NET
depends on PHONET
@@ -333,7 +333,7 @@ config USB_CONFIGFS_PHONET
The Phonet protocol implementation for USB device.
config USB_CONFIGFS_MASS_STORAGE
- boolean "Mass storage"
+ bool "Mass storage"
depends on USB_CONFIGFS
depends on BLOCK
select USB_F_MASS_STORAGE
@@ -344,7 +344,7 @@ config USB_CONFIGFS_MASS_STORAGE
specified as a module parameter or sysfs option.
config USB_CONFIGFS_F_LB_SS
- boolean "Loopback and sourcesink function (for testing)"
+ bool "Loopback and sourcesink function (for testing)"
depends on USB_CONFIGFS
select USB_F_SS_LB
help
@@ -357,7 +357,7 @@ config USB_CONFIGFS_F_LB_SS
and its driver through a basic set of functional tests.
config USB_CONFIGFS_F_FS
- boolean "Function filesystem (FunctionFS)"
+ bool "Function filesystem (FunctionFS)"
depends on USB_CONFIGFS
select USB_F_FS
help
@@ -369,7 +369,7 @@ config USB_CONFIGFS_F_FS
mass storage) and other are implemented in user space.
config USB_CONFIGFS_F_UAC1
- boolean "Audio Class 1.0"
+ bool "Audio Class 1.0"
depends on USB_CONFIGFS
depends on SND
select USB_LIBCOMPOSITE
@@ -382,7 +382,7 @@ config USB_CONFIGFS_F_UAC1
on the device.
config USB_CONFIGFS_F_UAC2
- boolean "Audio Class 2.0"
+ bool "Audio Class 2.0"
depends on USB_CONFIGFS
depends on SND
select USB_LIBCOMPOSITE
@@ -400,7 +400,7 @@ config USB_CONFIGFS_F_UAC2
wants as audio data to the USB Host.
config USB_CONFIGFS_F_MIDI
- boolean "MIDI function"
+ bool "MIDI function"
depends on USB_CONFIGFS
depends on SND
select USB_LIBCOMPOSITE
@@ -414,7 +414,7 @@ config USB_CONFIGFS_F_MIDI
ALSA's aconnect utility etc.
config USB_CONFIGFS_F_HID
- boolean "HID function"
+ bool "HID function"
depends on USB_CONFIGFS
select USB_F_HID
help
diff -puN drivers/usb/gadget/legacy/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes drivers/usb/gadget/legacy/Kconfig
--- a/drivers/usb/gadget/legacy/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/drivers/usb/gadget/legacy/Kconfig
@@ -40,7 +40,7 @@ config USB_ZERO
dynamically linked module called "g_zero".
config USB_ZERO_HNPTEST
- boolean "HNP Test Device"
+ bool "HNP Test Device"
depends on USB_ZERO && USB_OTG
help
You can configure this device to enumerate using the device
diff -puN drivers/usb/gadget/udc/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes drivers/usb/gadget/udc/Kconfig
--- a/drivers/usb/gadget/udc/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/drivers/usb/gadget/udc/Kconfig
@@ -198,7 +198,7 @@ config USB_S3C2410
S3C2440 processors.
config USB_S3C2410_DEBUG
- boolean "S3C2410 udc debug messages"
+ bool "S3C2410 udc debug messages"
depends on USB_S3C2410
config USB_S3C_HSUDC
@@ -287,7 +287,7 @@ config USB_NET2272
gadget drivers to also be dynamically linked.
config USB_NET2272_DMA
- boolean "Support external DMA controller"
+ bool "Support external DMA controller"
depends on USB_NET2272 && HAS_DMA
help
The NET2272 part can optionally support an external DMA
diff -puN drivers/usb/phy/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes drivers/usb/phy/Kconfig
--- a/drivers/usb/phy/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/drivers/usb/phy/Kconfig
@@ -119,7 +119,7 @@ config TAHVO_USB
config TAHVO_USB_HOST_BY_DEFAULT
depends on TAHVO_USB
- boolean "Device in USB host mode by default"
+ bool "Device in USB host mode by default"
help
Say Y here, if you want the device to enter USB host mode
by default on bootup.
diff -puN init/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes init/Kconfig
--- a/init/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/init/Kconfig
@@ -914,7 +914,7 @@ config NUMA_BALANCING_DEFAULT_ENABLED
machine.
menuconfig CGROUPS
- boolean "Control Group support"
+ bool "Control Group support"
select KERNFS
help
This option adds support for grouping sets of processes together, for
@@ -1770,7 +1770,7 @@ config SLABINFO
default y
config RT_MUTEXES
- boolean
+ bool
config BASE_SMALL
int
diff -puN lib/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes lib/Kconfig
--- a/lib/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/lib/Kconfig
@@ -14,7 +14,7 @@ config BITREVERSE
tristate
config RATIONAL
- boolean
+ bool
config GENERIC_STRNCPY_FROM_USER
bool
@@ -39,14 +39,14 @@ config GENERIC_IOMAP
select GENERIC_PCI_IOMAP
config GENERIC_IO
- boolean
+ bool
default n
config STMP_DEVICE
bool
config PERCPU_RWSEM
- boolean
+ bool
config ARCH_USE_CMPXCHG_LOCKREF
bool
@@ -257,7 +257,7 @@ config DECOMPRESS_LZ4
# Generic allocator support is selected if needed
#
config GENERIC_ALLOCATOR
- boolean
+ bool
#
# reed solomon support is select'ed if needed
@@ -266,16 +266,16 @@ config REED_SOLOMON
tristate
config REED_SOLOMON_ENC8
- boolean
+ bool
config REED_SOLOMON_DEC8
- boolean
+ bool
config REED_SOLOMON_ENC16
- boolean
+ bool
config REED_SOLOMON_DEC16
- boolean
+ bool
#
# BCH support is selected if needed
@@ -284,7 +284,7 @@ config BCH
tristate
config BCH_CONST_PARAMS
- boolean
+ bool
help
Drivers may select this option to force specific constant
values for parameters 'm' (Galois field order) and 't'
@@ -320,7 +320,7 @@ config BCH_CONST_T
# Textsearch support is select'ed if needed
#
config TEXTSEARCH
- boolean
+ bool
config TEXTSEARCH_KMP
tristate
@@ -332,10 +332,10 @@ config TEXTSEARCH_FSM
tristate
config BTREE
- boolean
+ bool
config INTERVAL_TREE
- boolean
+ bool
help
Simple, embeddable, interval-tree. Can find the start of an
overlapping range in log(n) time and then iterate over all
@@ -363,18 +363,18 @@ config ASSOCIATIVE_ARRAY
for more information.
config HAS_IOMEM
- boolean
+ bool
depends on !NO_IOMEM
select GENERIC_IO
default y
config HAS_IOPORT_MAP
- boolean
+ bool
depends on HAS_IOMEM && !NO_IOPORT_MAP
default y
config HAS_DMA
- boolean
+ bool
depends on !NO_DMA
default y
diff -puN mm/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes mm/Kconfig
--- a/mm/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/mm/Kconfig
@@ -129,28 +129,28 @@ config SPARSEMEM_VMEMMAP
efficient option when sufficient kernel resources are available.
config HAVE_MEMBLOCK
- boolean
+ bool
config HAVE_MEMBLOCK_NODE_MAP
- boolean
+ bool
config HAVE_MEMBLOCK_PHYS_MAP
- boolean
+ bool
config HAVE_GENERIC_RCU_GUP
- boolean
+ bool
config ARCH_DISCARD_MEMBLOCK
- boolean
+ bool
config NO_BOOTMEM
- boolean
+ bool
config MEMORY_ISOLATION
- boolean
+ bool
config MOVABLE_NODE
- boolean "Enable to assign a node which has only movable memory"
+ bool "Enable to assign a node which has only movable memory"
depends on HAVE_MEMBLOCK
depends on NO_BOOTMEM
depends on X86_64
@@ -228,12 +228,12 @@ config SPLIT_PTLOCK_CPUS
default "4"
config ARCH_ENABLE_SPLIT_PMD_PTLOCK
- boolean
+ bool
#
# support for memory balloon
config MEMORY_BALLOON
- boolean
+ bool
#
# support for memory balloon compaction
@@ -276,7 +276,7 @@ config MIGRATION
allocation instead of reclaiming.
config ARCH_ENABLE_HUGEPAGE_MIGRATION
- boolean
+ bool
config PHYS_ADDR_T_64BIT
def_bool 64BIT || ARCH_PHYS_ADDR_T_64BIT
diff -puN net/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes net/Kconfig
--- a/net/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/net/Kconfig
@@ -231,18 +231,18 @@ source "net/hsr/Kconfig"
source "net/switchdev/Kconfig"
config RPS
- boolean
+ bool
depends on SMP && SYSFS
default y
config RFS_ACCEL
- boolean
+ bool
depends on RPS
select CPU_RMAP
default y
config XPS
- boolean
+ bool
depends on SMP
default y
@@ -254,18 +254,18 @@ config CGROUP_NET_PRIO
a per-interface basis.
config CGROUP_NET_CLASSID
- boolean "Network classid cgroup"
+ bool "Network classid cgroup"
depends on CGROUPS
---help---
Cgroup subsystem for use as general purpose socket classid marker that is
being used in cls_cgroup and for netfilter matching.
config NET_RX_BUSY_POLL
- boolean
+ bool
default y
config BQL
- boolean
+ bool
depends on SYSFS
select DQL
default y
@@ -282,7 +282,7 @@ config BPF_JIT
this feature changing /proc/sys/net/core/bpf_jit_enable
config NET_FLOW_LIMIT
- boolean
+ bool
depends on RPS
default y
---help---
diff -puN net/sched/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes net/sched/Kconfig
--- a/net/sched/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/net/sched/Kconfig
@@ -348,7 +348,7 @@ config NET_SCH_PLUG
comment "Classification"
config NET_CLS
- boolean
+ bool
config NET_CLS_BASIC
tristate "Elementary classification (BASIC)"
diff -puN net/switchdev/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes net/switchdev/Kconfig
--- a/net/switchdev/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/net/switchdev/Kconfig
@@ -3,7 +3,7 @@
#
config NET_SWITCHDEV
- boolean "Switch (and switch-ish) device support (EXPERIMENTAL)"
+ bool "Switch (and switch-ish) device support (EXPERIMENTAL)"
depends on INET
---help---
This module provides glue between core networking code and device
diff -puN security/integrity/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes security/integrity/Kconfig
--- a/security/integrity/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/security/integrity/Kconfig
@@ -16,7 +16,7 @@ config INTEGRITY
if INTEGRITY
config INTEGRITY_SIGNATURE
- boolean "Digital signature verification using multiple keyrings"
+ bool "Digital signature verification using multiple keyrings"
depends on KEYS
default n
select SIGNATURE
@@ -30,7 +30,7 @@ config INTEGRITY_SIGNATURE
usually only added from initramfs.
config INTEGRITY_ASYMMETRIC_KEYS
- boolean "Enable asymmetric keys support"
+ bool "Enable asymmetric keys support"
depends on INTEGRITY_SIGNATURE
default n
select ASYMMETRIC_KEY_TYPE
diff -puN security/integrity/evm/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes security/integrity/evm/Kconfig
--- a/security/integrity/evm/Kconfig~kconfig-use-bool-instead-of-boolean-for-type-definition-attributes
+++ a/security/integrity/evm/Kconfig
@@ -1,5 +1,5 @@
config EVM
- boolean "EVM support"
+ bool "EVM support"
select KEYS
select ENCRYPTED_KEYS
select CRYPTO_HMAC
_
Patches currently in -mm which might be from cj@xxxxxxxxx are
checkpatch-add-check-for-keyword-boolean-in-kconfig-definitions.patch
linux-next.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
