[merged] gcov-enable-gcov_profile_all-from-arch-kconfigs.patch removed from -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch titled
     Subject: gcov: enable GCOV_PROFILE_ALL from ARCH Kconfigs
has been removed from the -mm tree.  Its filename was
     gcov-enable-gcov_profile_all-from-arch-kconfigs.patch

This patch was dropped because it was merged into mainline or a subsystem tree

------------------------------------------------------
From: Riku Voipio <riku.voipio@xxxxxxxxxx>
Subject: gcov: enable GCOV_PROFILE_ALL from ARCH Kconfigs

Following the suggestions from Andrew Morton and Stephen Rothwell,
Dont expand the ARCH list in kernel/gcov/Kconfig. Instead,
define a ARCH_HAS_GCOV_PROFILE_ALL bool which architectures
can enable.

set ARCH_HAS_GCOV_PROFILE_ALL on Architectures where it was
previously allowed + ARM64 which I tested.

Signed-off-by: Riku Voipio <riku.voipio@xxxxxxxxxx>
Cc: Peter Oberparleiter <oberpar@xxxxxxxxxxxxxxxxxx>
Cc: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 arch/arm/Kconfig        |    1 +
 arch/arm64/Kconfig      |    1 +
 arch/microblaze/Kconfig |    1 +
 arch/powerpc/Kconfig    |    1 +
 arch/s390/Kconfig       |    1 +
 arch/sh/Kconfig         |    1 +
 arch/x86/Kconfig        |    1 +
 kernel/gcov/Kconfig     |    5 ++++-
 8 files changed, 11 insertions(+), 1 deletion(-)

diff -puN arch/arm/Kconfig~gcov-enable-gcov_profile_all-from-arch-kconfigs arch/arm/Kconfig
--- a/arch/arm/Kconfig~gcov-enable-gcov_profile_all-from-arch-kconfigs
+++ a/arch/arm/Kconfig
@@ -5,6 +5,7 @@ config ARM
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAVE_CUSTOM_GPIO_H
+	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_USE_BUILTIN_BSWAP
diff -puN arch/arm64/Kconfig~gcov-enable-gcov_profile_all-from-arch-kconfigs arch/arm64/Kconfig
--- a/arch/arm64/Kconfig~gcov-enable-gcov_profile_all-from-arch-kconfigs
+++ a/arch/arm64/Kconfig
@@ -2,6 +2,7 @@ config ARM64
 	def_bool y
 	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_HAS_SG_CHAIN
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_USE_CMPXCHG_LOCKREF
diff -puN arch/microblaze/Kconfig~gcov-enable-gcov_profile_all-from-arch-kconfigs arch/microblaze/Kconfig
--- a/arch/microblaze/Kconfig~gcov-enable-gcov_profile_all-from-arch-kconfigs
+++ a/arch/microblaze/Kconfig
@@ -1,5 +1,6 @@
 config MICROBLAZE
 	def_bool y
+	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select ARCH_WANT_OPTIONAL_GPIOLIB
diff -puN arch/powerpc/Kconfig~gcov-enable-gcov_profile_all-from-arch-kconfigs arch/powerpc/Kconfig
--- a/arch/powerpc/Kconfig~gcov-enable-gcov_profile_all-from-arch-kconfigs
+++ a/arch/powerpc/Kconfig
@@ -129,6 +129,7 @@ config PPC
 	select HAVE_BPF_JIT if PPC64
 	select HAVE_ARCH_JUMP_LABEL
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
+	select ARCH_HAS_GCOV_PROFILE_ALL
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_CMOS_UPDATE
 	select GENERIC_TIME_VSYSCALL_OLD
diff -puN arch/s390/Kconfig~gcov-enable-gcov_profile_all-from-arch-kconfigs arch/s390/Kconfig
--- a/arch/s390/Kconfig~gcov-enable-gcov_profile_all-from-arch-kconfigs
+++ a/arch/s390/Kconfig
@@ -65,6 +65,7 @@ config S390
 	def_bool y
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS
+	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select ARCH_INLINE_READ_LOCK
 	select ARCH_INLINE_READ_LOCK_BH
diff -puN arch/sh/Kconfig~gcov-enable-gcov_profile_all-from-arch-kconfigs arch/sh/Kconfig
--- a/arch/sh/Kconfig~gcov-enable-gcov_profile_all-from-arch-kconfigs
+++ a/arch/sh/Kconfig
@@ -16,6 +16,7 @@ config SUPERH
 	select HAVE_DEBUG_BUGVERBOSE
 	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A)
+	select ARCH_HAS_GCOV_PROFILE_ALL
 	select PERF_USE_VMALLOC
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_KERNEL_GZIP
diff -puN arch/x86/Kconfig~gcov-enable-gcov_profile_all-from-arch-kconfigs arch/x86/Kconfig
--- a/arch/x86/Kconfig~gcov-enable-gcov_profile_all-from-arch-kconfigs
+++ a/arch/x86/Kconfig
@@ -24,6 +24,7 @@ config X86
 	select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI
 	select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS
 	select ARCH_HAS_FAST_MULTIPLIER
+	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
 	select HAVE_AOUT if X86_32
diff -puN kernel/gcov/Kconfig~gcov-enable-gcov_profile_all-from-arch-kconfigs kernel/gcov/Kconfig
--- a/kernel/gcov/Kconfig~gcov-enable-gcov_profile_all-from-arch-kconfigs
+++ a/kernel/gcov/Kconfig
@@ -32,10 +32,13 @@ config GCOV_KERNEL
 	Note that the debugfs filesystem has to be mounted to access
 	profiling data.
 
+config ARCH_HAS_GCOV_PROFILE_ALL
+	def_bool n
+
 config GCOV_PROFILE_ALL
 	bool "Profile entire Kernel"
 	depends on GCOV_KERNEL
-	depends on SUPERH || S390 || X86 || PPC || MICROBLAZE || ARM || ARM64
+	depends on ARCH_HAS_GCOV_PROFILE_ALL
 	default n
 	---help---
 	This options activates profiling for the entire kernel.
_

Patches currently in -mm which might be from riku.voipio@xxxxxxxxxx are

origin.patch
linux-next.patch

--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies FAQ]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux