The patch titled
Subject: drivers/rtc/rtc-pm8xxx.c: rework to support pm8941 rtc
has been added to the -mm tree. Its filename is
rtc-pm8xxx-rework-to-support-pm8941-rtc.patch
This patch should soon appear at
http://ozlabs.org/~akpm/mmots/broken-out/rtc-pm8xxx-rework-to-support-pm8941-rtc.patch
and later at
http://ozlabs.org/~akpm/mmotm/broken-out/rtc-pm8xxx-rework-to-support-pm8941-rtc.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
The -mm tree is included into linux-next and is updated
there every 3-4 working days
------------------------------------------------------
From: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
Subject: drivers/rtc/rtc-pm8xxx.c: rework to support pm8941 rtc
Adds support for RTC device inside PM8941 PMIC. The RTC in this PMIC have
two register spaces. Thus the rtc-pm8xxx is slightly reworked to reflect
these differences.
The register set for different PMIC chips are selected on DT compatible
string base.
Signed-off-by: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
Cc: Alessandro Zummo <a.zummo@xxxxxxxxxxxx>
Cc: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
Cc: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
Cc: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/rtc/Kconfig | 2
drivers/rtc/rtc-pm8xxx.c | 217 ++++++++++++++++++++++---------------
2 files changed, 134 insertions(+), 85 deletions(-)
diff -puN drivers/rtc/Kconfig~rtc-pm8xxx-rework-to-support-pm8941-rtc drivers/rtc/Kconfig
--- a/drivers/rtc/Kconfig~rtc-pm8xxx-rework-to-support-pm8941-rtc
+++ a/drivers/rtc/Kconfig
@@ -1303,7 +1303,7 @@ config RTC_DRV_LPC32XX
config RTC_DRV_PM8XXX
tristate "Qualcomm PMIC8XXX RTC"
- depends on MFD_PM8XXX
+ depends on MFD_PM8XXX || MFD_SPMI_PMIC
help
If you say yes here you get support for the
Qualcomm PMIC8XXX RTC.
diff -puN drivers/rtc/rtc-pm8xxx.c~rtc-pm8xxx-rework-to-support-pm8941-rtc drivers/rtc/rtc-pm8xxx.c
--- a/drivers/rtc/rtc-pm8xxx.c~rtc-pm8xxx-rework-to-support-pm8941-rtc
+++ a/drivers/rtc/rtc-pm8xxx.c
@@ -27,21 +27,36 @@
/* RTC_CTRL register bit fields */
#define PM8xxx_RTC_ENABLE BIT(7)
-#define PM8xxx_RTC_ALARM_ENABLE BIT(1)
#define PM8xxx_RTC_ALARM_CLEAR BIT(0)
#define NUM_8_BIT_RTC_REGS 0x4
/**
+ * struct pm8xxx_rtc_regs - describe RTC registers per PMIC versions
+ * @ctrl: base address of control register
+ * @write: base address of write register
+ * @read: base address of read register
+ * @alarm_ctrl: base address of alarm control register
+ * @alarm_ctrl2: base address of alarm control2 register
+ * @alarm_rw: base address of alarm read-write register
+ * @alarm_en: alarm enable mask
+ */
+struct pm8xxx_rtc_regs {
+ unsigned int ctrl;
+ unsigned int write;
+ unsigned int read;
+ unsigned int alarm_ctrl;
+ unsigned int alarm_ctrl2;
+ unsigned int alarm_rw;
+ unsigned int alarm_en;
+};
+
+/**
* struct pm8xxx_rtc - rtc driver internal structure
* @rtc: rtc device for this driver.
* @regmap: regmap used to access RTC registers
* @allow_set_time: indicates whether writing to the RTC is allowed
* @rtc_alarm_irq: rtc alarm irq number.
- * @rtc_base: address of rtc control register.
- * @rtc_read_base: base address of read registers.
- * @rtc_write_base: base address of write registers.
- * @alarm_rw_base: base address of alarm registers.
* @ctrl_reg: rtc control register.
* @rtc_dev: device structure.
* @ctrl_reg_lock: spinlock protecting access to ctrl_reg.
@@ -51,11 +66,7 @@ struct pm8xxx_rtc {
struct regmap *regmap;
bool allow_set_time;
int rtc_alarm_irq;
- int rtc_base;
- int rtc_read_base;
- int rtc_write_base;
- int alarm_rw_base;
- u8 ctrl_reg;
+ const struct pm8xxx_rtc_regs *regs;
struct device *rtc_dev;
spinlock_t ctrl_reg_lock;
};
@@ -71,8 +82,10 @@ static int pm8xxx_rtc_set_time(struct de
{
int rc, i;
unsigned long secs, irq_flags;
- u8 value[NUM_8_BIT_RTC_REGS], alarm_enabled = 0, ctrl_reg;
+ u8 value[NUM_8_BIT_RTC_REGS], alarm_enabled = 0;
+ unsigned int ctrl_reg;
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+ const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
if (!rtc_dd->allow_set_time)
return -EACCES;
@@ -87,30 +100,32 @@ static int pm8xxx_rtc_set_time(struct de
dev_dbg(dev, "Seconds value to be written to RTC = %lu\n", secs);
spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
- ctrl_reg = rtc_dd->ctrl_reg;
- if (ctrl_reg & PM8xxx_RTC_ALARM_ENABLE) {
+ rc = regmap_read(rtc_dd->regmap, regs->ctrl, &ctrl_reg);
+ if (rc)
+ goto rtc_rw_fail;
+
+ if (ctrl_reg & regs->alarm_en) {
alarm_enabled = 1;
- ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+ ctrl_reg &= ~regs->alarm_en;
+ rc = regmap_write(rtc_dd->regmap, regs->ctrl, ctrl_reg);
if (rc) {
dev_err(dev, "Write to RTC control register failed\n");
goto rtc_rw_fail;
}
- rtc_dd->ctrl_reg = ctrl_reg;
} else {
spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
}
/* Write 0 to Byte[0] */
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_write_base, 0);
+ rc = regmap_write(rtc_dd->regmap, regs->write, 0);
if (rc) {
dev_err(dev, "Write to RTC write data register failed\n");
goto rtc_rw_fail;
}
/* Write Byte[1], Byte[2], Byte[3] */
- rc = regmap_bulk_write(rtc_dd->regmap, rtc_dd->rtc_write_base + 1,
+ rc = regmap_bulk_write(rtc_dd->regmap, regs->write + 1,
&value[1], sizeof(value) - 1);
if (rc) {
dev_err(dev, "Write to RTC write data register failed\n");
@@ -118,20 +133,19 @@ static int pm8xxx_rtc_set_time(struct de
}
/* Write Byte[0] */
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_write_base, value[0]);
+ rc = regmap_write(rtc_dd->regmap, regs->write, value[0]);
if (rc) {
dev_err(dev, "Write to RTC write data register failed\n");
goto rtc_rw_fail;
}
if (alarm_enabled) {
- ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+ ctrl_reg |= regs->alarm_en;;
+ rc = regmap_write(rtc_dd->regmap, regs->ctrl, ctrl_reg);
if (rc) {
dev_err(dev, "Write to RTC control register failed\n");
goto rtc_rw_fail;
}
- rtc_dd->ctrl_reg = ctrl_reg;
}
rtc_rw_fail:
@@ -148,9 +162,9 @@ static int pm8xxx_rtc_read_time(struct d
unsigned long secs;
unsigned int reg;
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+ const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
- rc = regmap_bulk_read(rtc_dd->regmap, rtc_dd->rtc_read_base,
- value, sizeof(value));
+ rc = regmap_bulk_read(rtc_dd->regmap, regs->read, value, sizeof(value));
if (rc) {
dev_err(dev, "RTC read data register failed\n");
return rc;
@@ -160,14 +174,14 @@ static int pm8xxx_rtc_read_time(struct d
* Read the LSB again and check if there has been a carry over.
* If there is, redo the read operation.
*/
- rc = regmap_read(rtc_dd->regmap, rtc_dd->rtc_read_base, ®);
+ rc = regmap_read(rtc_dd->regmap, regs->read, ®);
if (rc < 0) {
dev_err(dev, "RTC read data register failed\n");
return rc;
}
if (unlikely(reg < value[0])) {
- rc = regmap_bulk_read(rtc_dd->regmap, rtc_dd->rtc_read_base,
+ rc = regmap_bulk_read(rtc_dd->regmap, regs->read,
value, sizeof(value));
if (rc) {
dev_err(dev, "RTC read data register failed\n");
@@ -195,9 +209,11 @@ static int pm8xxx_rtc_read_time(struct d
static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
int rc, i;
- u8 value[NUM_8_BIT_RTC_REGS], ctrl_reg;
+ u8 value[NUM_8_BIT_RTC_REGS];
+ unsigned int ctrl_reg;
unsigned long secs, irq_flags;
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+ const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
rtc_tm_to_time(&alarm->time, &secs);
@@ -208,28 +224,28 @@ static int pm8xxx_rtc_set_alarm(struct d
spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
- rc = regmap_bulk_write(rtc_dd->regmap, rtc_dd->alarm_rw_base, value,
+ rc = regmap_bulk_write(rtc_dd->regmap, regs->alarm_rw, value,
sizeof(value));
if (rc) {
dev_err(dev, "Write to RTC ALARM register failed\n");
goto rtc_rw_fail;
}
- ctrl_reg = rtc_dd->ctrl_reg;
+ rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl, &ctrl_reg);
+ if (rc)
+ goto rtc_rw_fail;
if (alarm->enabled)
- ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
+ ctrl_reg |= regs->alarm_en;
else
- ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
+ ctrl_reg &= ~regs->alarm_en;
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+ rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
if (rc) {
- dev_err(dev, "Write to RTC control register failed\n");
+ dev_err(dev, "Write to RTC alarm control register failed\n");
goto rtc_rw_fail;
}
- rtc_dd->ctrl_reg = ctrl_reg;
-
dev_dbg(dev, "Alarm Set for h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n",
alarm->time.tm_hour, alarm->time.tm_min,
alarm->time.tm_sec, alarm->time.tm_mday,
@@ -245,8 +261,9 @@ static int pm8xxx_rtc_read_alarm(struct
u8 value[NUM_8_BIT_RTC_REGS];
unsigned long secs;
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+ const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
- rc = regmap_bulk_read(rtc_dd->regmap, rtc_dd->alarm_rw_base, value,
+ rc = regmap_bulk_read(rtc_dd->regmap, regs->alarm_rw, value,
sizeof(value));
if (rc) {
dev_err(dev, "RTC alarm time read failed\n");
@@ -276,25 +293,26 @@ static int pm8xxx_rtc_alarm_irq_enable(s
int rc;
unsigned long irq_flags;
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
- u8 ctrl_reg;
+ const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
+ unsigned int ctrl_reg;
spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
- ctrl_reg = rtc_dd->ctrl_reg;
+ rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl, &ctrl_reg);
+ if (rc)
+ goto rtc_rw_fail;
if (enable)
- ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
+ ctrl_reg |= regs->alarm_en;
else
- ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
+ ctrl_reg &= ~regs->alarm_en;
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+ rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
if (rc) {
dev_err(dev, "Write to RTC control register failed\n");
goto rtc_rw_fail;
}
- rtc_dd->ctrl_reg = ctrl_reg;
-
rtc_rw_fail:
spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
return rc;
@@ -311,6 +329,7 @@ static const struct rtc_class_ops pm8xxx
static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
{
struct pm8xxx_rtc *rtc_dd = dev_id;
+ const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
unsigned int ctrl_reg;
int rc;
unsigned long irq_flags;
@@ -320,48 +339,100 @@ static irqreturn_t pm8xxx_alarm_trigger(
spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
/* Clear the alarm enable bit */
- ctrl_reg = rtc_dd->ctrl_reg;
- ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
+ rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl, &ctrl_reg);
+ if (rc) {
+ spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+ goto rtc_alarm_handled;
+ }
+
+ ctrl_reg &= ~regs->alarm_en;;
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+ rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
if (rc) {
spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
dev_err(rtc_dd->rtc_dev,
- "Write to RTC control register failed\n");
+ "Write to alarm control register failed\n");
goto rtc_alarm_handled;
}
- rtc_dd->ctrl_reg = ctrl_reg;
spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
/* Clear RTC alarm register */
- rc = regmap_read(rtc_dd->regmap,
- rtc_dd->rtc_base + PM8XXX_ALARM_CTRL_OFFSET,
- &ctrl_reg);
+ rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl2, &ctrl_reg);
if (rc) {
dev_err(rtc_dd->rtc_dev,
- "RTC Alarm control register read failed\n");
+ "RTC Alarm control2 register read failed\n");
goto rtc_alarm_handled;
}
- ctrl_reg &= ~PM8xxx_RTC_ALARM_CLEAR;
- rc = regmap_write(rtc_dd->regmap,
- rtc_dd->rtc_base + PM8XXX_ALARM_CTRL_OFFSET,
- ctrl_reg);
+ ctrl_reg |= PM8xxx_RTC_ALARM_CLEAR;
+ rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl2, ctrl_reg);
if (rc)
dev_err(rtc_dd->rtc_dev,
- "Write to RTC Alarm control register failed\n");
+ "Write to RTC Alarm control2 register failed\n");
rtc_alarm_handled:
return IRQ_HANDLED;
}
+static int pm8xxx_rtc_enable(struct pm8xxx_rtc *rtc_dd)
+{
+ const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
+ unsigned int ctrl_reg;
+ int rc;
+
+ /* Check if the RTC is on, else turn it on */
+ rc = regmap_read(rtc_dd->regmap, regs->ctrl, &ctrl_reg);
+ if (rc)
+ return rc;
+
+ if (!(ctrl_reg & PM8xxx_RTC_ENABLE)) {
+ ctrl_reg |= PM8xxx_RTC_ENABLE;
+ rc = regmap_write(rtc_dd->regmap, regs->ctrl, ctrl_reg);
+ if (rc)
+ return rc;
+ }
+
+ return 0;
+}
+
+static const struct pm8xxx_rtc_regs pm8921_regs = {
+ .ctrl = 0x11d,
+ .write = 0x11f,
+ .read = 0x123,
+ .alarm_rw = 0x127,
+ .alarm_ctrl = 0x11d,
+ .alarm_ctrl2 = 0x11e,
+ .alarm_en = BIT(1),
+};
+
+static const struct pm8xxx_rtc_regs pm8058_regs = {
+ .ctrl = 0x1e8,
+ .write = 0x1ea,
+ .read = 0x1ee,
+ .alarm_rw = 0x1f2,
+ .alarm_ctrl = 0x1e8,
+ .alarm_ctrl2 = 0x1e9,
+ .alarm_en = BIT(1),
+};
+
+static const struct pm8xxx_rtc_regs pm8941_regs = {
+ .ctrl = 0x6046,
+ .write = 0x6040,
+ .read = 0x6048,
+ .alarm_rw = 0x6140,
+ .alarm_ctrl = 0x6146,
+ .alarm_ctrl2 = 0x6148,
+ .alarm_en = BIT(7),
+};
+
/*
* Hardcoded RTC bases until IORESOURCE_REG mapping is figured out
*/
static const struct of_device_id pm8xxx_id_table[] = {
- { .compatible = "qcom,pm8921-rtc", .data = (void *) 0x11D },
- { .compatible = "qcom,pm8058-rtc", .data = (void *) 0x1E8 },
+ { .compatible = "qcom,pm8921-rtc", .data = &pm8921_regs },
+ { .compatible = "qcom,pm8058-rtc", .data = &pm8058_regs },
+ { .compatible = "qcom,pm8941-rtc", .data = &pm8941_regs },
{ },
};
MODULE_DEVICE_TABLE(of, pm8xxx_id_table);
@@ -369,7 +440,6 @@ MODULE_DEVICE_TABLE(of, pm8xxx_id_table)
static int pm8xxx_rtc_probe(struct platform_device *pdev)
{
int rc;
- unsigned int ctrl_reg;
struct pm8xxx_rtc *rtc_dd;
const struct of_device_id *match;
@@ -399,33 +469,12 @@ static int pm8xxx_rtc_probe(struct platf
rtc_dd->allow_set_time = of_property_read_bool(pdev->dev.of_node,
"allow-set-time");
- rtc_dd->rtc_base = (long) match->data;
-
- /* Setup RTC register addresses */
- rtc_dd->rtc_write_base = rtc_dd->rtc_base + PM8XXX_RTC_WRITE_OFFSET;
- rtc_dd->rtc_read_base = rtc_dd->rtc_base + PM8XXX_RTC_READ_OFFSET;
- rtc_dd->alarm_rw_base = rtc_dd->rtc_base + PM8XXX_ALARM_RW_OFFSET;
-
+ rtc_dd->regs = match->data;
rtc_dd->rtc_dev = &pdev->dev;
- /* Check if the RTC is on, else turn it on */
- rc = regmap_read(rtc_dd->regmap, rtc_dd->rtc_base, &ctrl_reg);
- if (rc) {
- dev_err(&pdev->dev, "RTC control register read failed!\n");
+ rc = pm8xxx_rtc_enable(rtc_dd);
+ if (rc)
return rc;
- }
-
- if (!(ctrl_reg & PM8xxx_RTC_ENABLE)) {
- ctrl_reg |= PM8xxx_RTC_ENABLE;
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
- if (rc) {
- dev_err(&pdev->dev,
- "Write to RTC control register failed\n");
- return rc;
- }
- }
-
- rtc_dd->ctrl_reg = ctrl_reg;
platform_set_drvdata(pdev, rtc_dd);
_
Patches currently in -mm which might be from svarbanov@xxxxxxxxxx are
rtc-pm8xxx-rework-to-support-pm8941-rtc.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
