Subject: + drivers-rtc-rtc-omapc-use-bit-macro.patch added to -mm tree
To: nsekhar@xxxxxx,a.zummo@xxxxxxxxxxxx,lokeshvutla@xxxxxx
From: akpm@xxxxxxxxxxxxxxxxxxxx
Date: Fri, 09 May 2014 13:27:53 -0700
The patch titled
Subject: drivers/rtc/rtc-omap.c: use BIT() macro
has been added to the -mm tree. Its filename is
drivers-rtc-rtc-omapc-use-bit-macro.patch
This patch should soon appear at
http://ozlabs.org/~akpm/mmots/broken-out/drivers-rtc-rtc-omapc-use-bit-macro.patch
and later at
http://ozlabs.org/~akpm/mmotm/broken-out/drivers-rtc-rtc-omapc-use-bit-macro.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
The -mm tree is included into linux-next and is updated
there every 3-4 working days
------------------------------------------------------
From: Sekhar Nori <nsekhar@xxxxxx>
Subject: drivers/rtc/rtc-omap.c: use BIT() macro
Use BIT() macro for RTC_HAS_<FEATURE> defines instead of hand-writing bit
masks.
Use BIT() macros for register bit field definitions.
While at it, fix indentation done using spaces.
No functional change in this patch.
Signed-off-by: Sekhar Nori <nsekhar@xxxxxx>
Cc: Alessandro Zummo <a.zummo@xxxxxxxxxxxx>
Cc: Lokesh Vutla <lokeshvutla@xxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/rtc/rtc-omap.c | 42 +++++++++++++++++++--------------------
1 file changed, 21 insertions(+), 21 deletions(-)
diff -puN drivers/rtc/rtc-omap.c~drivers-rtc-rtc-omapc-use-bit-macro drivers/rtc/rtc-omap.c
--- a/drivers/rtc/rtc-omap.c~drivers-rtc-rtc-omapc-use-bit-macro
+++ a/drivers/rtc/rtc-omap.c
@@ -73,43 +73,43 @@
#define OMAP_RTC_IRQWAKEEN 0x7c
/* OMAP_RTC_CTRL_REG bit fields: */
-#define OMAP_RTC_CTRL_SPLIT (1<<7)
-#define OMAP_RTC_CTRL_DISABLE (1<<6)
-#define OMAP_RTC_CTRL_SET_32_COUNTER (1<<5)
-#define OMAP_RTC_CTRL_TEST (1<<4)
-#define OMAP_RTC_CTRL_MODE_12_24 (1<<3)
-#define OMAP_RTC_CTRL_AUTO_COMP (1<<2)
-#define OMAP_RTC_CTRL_ROUND_30S (1<<1)
-#define OMAP_RTC_CTRL_STOP (1<<0)
+#define OMAP_RTC_CTRL_SPLIT BIT(7)
+#define OMAP_RTC_CTRL_DISABLE BIT(6)
+#define OMAP_RTC_CTRL_SET_32_COUNTER BIT(5)
+#define OMAP_RTC_CTRL_TEST BIT(4)
+#define OMAP_RTC_CTRL_MODE_12_24 BIT(3)
+#define OMAP_RTC_CTRL_AUTO_COMP BIT(2)
+#define OMAP_RTC_CTRL_ROUND_30S BIT(1)
+#define OMAP_RTC_CTRL_STOP BIT(0)
/* OMAP_RTC_STATUS_REG bit fields: */
-#define OMAP_RTC_STATUS_POWER_UP (1<<7)
-#define OMAP_RTC_STATUS_ALARM (1<<6)
-#define OMAP_RTC_STATUS_1D_EVENT (1<<5)
-#define OMAP_RTC_STATUS_1H_EVENT (1<<4)
-#define OMAP_RTC_STATUS_1M_EVENT (1<<3)
-#define OMAP_RTC_STATUS_1S_EVENT (1<<2)
-#define OMAP_RTC_STATUS_RUN (1<<1)
-#define OMAP_RTC_STATUS_BUSY (1<<0)
+#define OMAP_RTC_STATUS_POWER_UP BIT(7)
+#define OMAP_RTC_STATUS_ALARM BIT(6)
+#define OMAP_RTC_STATUS_1D_EVENT BIT(5)
+#define OMAP_RTC_STATUS_1H_EVENT BIT(4)
+#define OMAP_RTC_STATUS_1M_EVENT BIT(3)
+#define OMAP_RTC_STATUS_1S_EVENT BIT(2)
+#define OMAP_RTC_STATUS_RUN BIT(1)
+#define OMAP_RTC_STATUS_BUSY BIT(0)
/* OMAP_RTC_INTERRUPTS_REG bit fields: */
-#define OMAP_RTC_INTERRUPTS_IT_ALARM (1<<3)
-#define OMAP_RTC_INTERRUPTS_IT_TIMER (1<<2)
+#define OMAP_RTC_INTERRUPTS_IT_ALARM BIT(3)
+#define OMAP_RTC_INTERRUPTS_IT_TIMER BIT(2)
/* OMAP_RTC_IRQWAKEEN bit fields: */
-#define OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN (1<<1)
+#define OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN BIT(1)
/* OMAP_RTC_KICKER values */
#define KICK0_VALUE 0x83e70b13
#define KICK1_VALUE 0x95a4f1e0
-#define OMAP_RTC_HAS_KICKER 0x1
+#define OMAP_RTC_HAS_KICKER BIT(0)
/*
* Few RTC IP revisions has special WAKE-EN Register to enable Wakeup
* generation for event Alarm.
*/
-#define OMAP_RTC_HAS_IRQWAKEEN 0x2
+#define OMAP_RTC_HAS_IRQWAKEEN BIT(1)
static void __iomem *rtc_base;
_
Patches currently in -mm which might be from nsekhar@xxxxxx are
drivers-rtc-rtc-omapc-remove-multiple-device-id-checks.patch
drivers-rtc-rtc-omapc-use-bit-macro.patch
drivers-rtc-rtc-omapc-add-support-for-enabling-32khz-clock.patch
linux-next.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
