Subject: + rtc-rtc-cmos-drivers-char-rtcc-features-for-decstation-support.patch added to -mm tree To: macro@xxxxxxxxxxxxxx,a.zummo@xxxxxxxxxxxx,ralf@xxxxxxxxxxxxxx From: akpm@xxxxxxxxxxxxxxxxxxxx Date: Mon, 21 Apr 2014 14:25:44 -0700 The patch titled Subject: drivers/rtc/rtc-cmos.c: drivers/char/rtc.c features for DECstation support has been added to the -mm tree. Its filename is rtc-rtc-cmos-drivers-char-rtcc-features-for-decstation-support.patch This patch should soon appear at http://ozlabs.org/~akpm/mmots/broken-out/rtc-rtc-cmos-drivers-char-rtcc-features-for-decstation-support.patch and later at http://ozlabs.org/~akpm/mmotm/broken-out/rtc-rtc-cmos-drivers-char-rtcc-features-for-decstation-support.patch Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/SubmitChecklist when testing your code *** The -mm tree is included into linux-next and is updated there every 3-4 working days ------------------------------------------------------ From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx> Subject: drivers/rtc/rtc-cmos.c: drivers/char/rtc.c features for DECstation support This brings in drivers/char/rtc.c functionality required for DECstation and, should the maintainers decide to switch, Alpha systems to use rtc-cmos. Specifically these features are made available: * RTC iomem rather than x86/PCI port I/O mapping, controlled with the RTC_IOMAPPED macro as with the original driver. The DS1287A chip in all DECstation systems is mapped in the host bus address space as a contiguous block of 64 32-bit words of which the least significant byte accesses the RTC chip for both reads and writes. All the address and data window register accesses are made transparently by the chipset glue logic so that the device appears directly mapped on the host bus. * A way to set the size of the address space explicitly with the newly-added `address_space' member of the platform part of the RTC device structure. This avoids the unreliable heuristics that does not work in a setup where the RTC is not explicitly accessed with the usual address and data window register pair. * The ability to use the RTC periodic interrupt as a system clock device, which is implemented by arch/mips/kernel/cevt-ds1287.c for DECstation systems and takes the RTC interrupt away from the RTC driver. Eventually hooking back to the clock device's interrupt handler should be possible for the purpose of the alarm clock and possibly also update-in-progress interrupt, but this is not done by this change. o To avoid interfering with the clock interrupt all the places where the RTC interrupt mask is fiddled with are only executed if and IRQ has been assigned to the RTC driver. o To avoid changing the clock setup Register A is not fiddled with if CMOS_RTC_FLAGS_NOFREQ is set in the newly-added `flags' member of the platform part of the RTC device structure. Originally, in drivers/char/rtc.c, this was keyed with the absence of the RTC interrupt, just like the interrupt mask, but there only the periodic interrupt frequency is set, whereas rtc-cmos also sets the divider bits. Therefore a new flag is introduced so that systems where the RTC interrupt is not usable rather than used as a system clock device can fully initialise the RTC. * A small clean-up is made to the IRQ assignment code that makes the IRQ number hardcoded to -1 rather than arbitrary -ENXIO (or whatever error happens to be returned by platform_get_irq) where no IRQ has been assigned to the RTC driver (NO_IRQ might be another candidate, but it looks like this macro has inconsistent or missing definitions and limited use and might therefore be unsafe). Verified to work correctly with a DECstation 5000/240 system. Signed-off-by: Maciej W. Rozycki <macro@xxxxxxxxxxxxxx> Cc: Alessandro Zummo <a.zummo@xxxxxxxxxxxx> Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/rtc/rtc-cmos.c | 85 ++++++++++++++++++++++++---------- include/linux/mc146818rtc.h | 4 + 2 files changed, 64 insertions(+), 25 deletions(-) diff -puN drivers/rtc/rtc-cmos.c~rtc-rtc-cmos-drivers-char-rtcc-features-for-decstation-support drivers/rtc/rtc-cmos.c --- a/drivers/rtc/rtc-cmos.c~rtc-rtc-cmos-drivers-char-rtcc-features-for-decstation-support +++ a/drivers/rtc/rtc-cmos.c @@ -647,6 +647,7 @@ cmos_do_probe(struct device *dev, struct int retval = 0; unsigned char rtc_control; unsigned address_space; + u32 flags = 0; /* there can be only one ... */ if (cmos_rtc.dev) @@ -660,9 +661,12 @@ cmos_do_probe(struct device *dev, struct * REVISIT non-x86 systems may instead use memory space resources * (needing ioremap etc), not i/o space resources like this ... */ - ports = request_region(ports->start, - resource_size(ports), - driver_name); + if (RTC_IOMAPPED) + ports = request_region + (ports->start, resource_size(ports), driver_name); + else + ports = request_mem_region + (ports->start, resource_size(ports), driver_name); if (!ports) { dev_dbg(dev, "i/o registers already in use\n"); return -EBUSY; @@ -699,6 +703,11 @@ cmos_do_probe(struct device *dev, struct * expect CMOS_READ and friends to handle. */ if (info) { + if (info->flags) + flags = info->flags; + if (info->address_space) + address_space = info->address_space; + if (info->rtc_day_alarm && info->rtc_day_alarm < 128) cmos_rtc.day_alrm = info->rtc_day_alarm; if (info->rtc_mon_alarm && info->rtc_mon_alarm < 128) @@ -726,18 +735,21 @@ cmos_do_probe(struct device *dev, struct spin_lock_irq(&rtc_lock); - /* force periodic irq to CMOS reset default of 1024Hz; - * - * REVISIT it's been reported that at least one x86_64 ALI mobo - * doesn't use 32KHz here ... for portability we might need to - * do something about other clock frequencies. - */ - cmos_rtc.rtc->irq_freq = 1024; - hpet_set_periodic_freq(cmos_rtc.rtc->irq_freq); - CMOS_WRITE(RTC_REF_CLCK_32KHZ | 0x06, RTC_FREQ_SELECT); + if (!(flags & CMOS_RTC_FLAGS_NOFREQ)) { + /* force periodic irq to CMOS reset default of 1024Hz; + * + * REVISIT it's been reported that at least one x86_64 ALI + * mobo doesn't use 32KHz here ... for portability we might + * need to do something about other clock frequencies. + */ + cmos_rtc.rtc->irq_freq = 1024; + hpet_set_periodic_freq(cmos_rtc.rtc->irq_freq); + CMOS_WRITE(RTC_REF_CLCK_32KHZ | 0x06, RTC_FREQ_SELECT); + } /* disable irqs */ - cmos_irq_disable(&cmos_rtc, RTC_PIE | RTC_AIE | RTC_UIE); + if (is_valid_irq(rtc_irq)) + cmos_irq_disable(&cmos_rtc, RTC_PIE | RTC_AIE | RTC_UIE); rtc_control = CMOS_READ(RTC_CONTROL); @@ -802,14 +814,18 @@ cleanup1: cmos_rtc.dev = NULL; rtc_device_unregister(cmos_rtc.rtc); cleanup0: - release_region(ports->start, resource_size(ports)); + if (RTC_IOMAPPED) + release_region(ports->start, resource_size(ports)); + else + release_mem_region(ports->start, resource_size(ports)); return retval; } -static void cmos_do_shutdown(void) +static void cmos_do_shutdown(int rtc_irq) { spin_lock_irq(&rtc_lock); - cmos_irq_disable(&cmos_rtc, RTC_IRQMASK); + if (is_valid_irq(rtc_irq)) + cmos_irq_disable(&cmos_rtc, RTC_IRQMASK); spin_unlock_irq(&rtc_lock); } @@ -818,7 +834,7 @@ static void __exit cmos_do_remove(struct struct cmos_rtc *cmos = dev_get_drvdata(dev); struct resource *ports; - cmos_do_shutdown(); + cmos_do_shutdown(cmos->irq); sysfs_remove_bin_file(&dev->kobj, &nvram); @@ -831,7 +847,10 @@ static void __exit cmos_do_remove(struct cmos->rtc = NULL; ports = cmos->iomem; - release_region(ports->start, resource_size(ports)); + if (RTC_IOMAPPED) + release_region(ports->start, resource_size(ports)); + else + release_mem_region(ports->start, resource_size(ports)); cmos->iomem = NULL; cmos->dev = NULL; @@ -1065,10 +1084,13 @@ static void __exit cmos_pnp_remove(struc static void cmos_pnp_shutdown(struct pnp_dev *pnp) { - if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(&pnp->dev)) + struct device *dev = &pnp->dev; + struct cmos_rtc *cmos = dev_get_drvdata(dev); + + if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(dev)) return; - cmos_do_shutdown(); + cmos_do_shutdown(cmos->irq); } static const struct pnp_device_id rtc_ids[] = { @@ -1143,11 +1165,21 @@ static inline void cmos_of_init(struct p static int __init cmos_platform_probe(struct platform_device *pdev) { + struct resource *resource; + int irq; + cmos_of_init(pdev); cmos_wake_setup(&pdev->dev); - return cmos_do_probe(&pdev->dev, - platform_get_resource(pdev, IORESOURCE_IO, 0), - platform_get_irq(pdev, 0)); + + if (RTC_IOMAPPED) + resource = platform_get_resource(pdev, IORESOURCE_IO, 0); + else + resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq = platform_get_irq(pdev, 0); + if (irq < 0) + irq = -1; + + return cmos_do_probe(&pdev->dev, resource, irq); } static int __exit cmos_platform_remove(struct platform_device *pdev) @@ -1158,10 +1190,13 @@ static int __exit cmos_platform_remove(s static void cmos_platform_shutdown(struct platform_device *pdev) { - if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(&pdev->dev)) + struct device *dev = &pdev->dev; + struct cmos_rtc *cmos = dev_get_drvdata(dev); + + if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(dev)) return; - cmos_do_shutdown(); + cmos_do_shutdown(cmos->irq); } /* work with hotplug and coldplug */ diff -puN include/linux/mc146818rtc.h~rtc-rtc-cmos-drivers-char-rtcc-features-for-decstation-support include/linux/mc146818rtc.h --- a/include/linux/mc146818rtc.h~rtc-rtc-cmos-drivers-char-rtcc-features-for-decstation-support +++ a/include/linux/mc146818rtc.h @@ -31,6 +31,10 @@ struct cmos_rtc_board_info { void (*wake_on)(struct device *dev); void (*wake_off)(struct device *dev); + u32 flags; +#define CMOS_RTC_FLAGS_NOFREQ (1 << 0) + int address_space; + u8 rtc_day_alarm; /* zero, or register index */ u8 rtc_mon_alarm; /* zero, or register index */ u8 rtc_century; /* zero, or register index */ _ Patches currently in -mm which might be from macro@xxxxxxxxxxxxxx are rtc-rtc-cmos-drivers-char-rtcc-features-for-decstation-support.patch rtc-rtc-cmos-drivers-char-rtcc-features-for-decstation-support-fix.patch dec-switch-decstation-systems-to-rtc-cmos.patch linux-next.patch -- To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html