Subject: + drivers-rtc-rtc-puv3c-use-dev_dbg-instead-of-pr_debug.patch added to -mm tree
To: sangjung.woo@xxxxxxxxxxx,a.zummo@xxxxxxxxxxxx,gxt@xxxxxxxxxxxxxxx,joe@xxxxxxxxxxx
From: akpm@xxxxxxxxxxxxxxxxxxxx
Date: Thu, 10 Oct 2013 15:52:03 -0700
The patch titled
Subject: drivers/rtc/rtc-puv3.c: use dev_dbg() instead of pr_debug()
has been added to the -mm tree. Its filename is
drivers-rtc-rtc-puv3c-use-dev_dbg-instead-of-pr_debug.patch
This patch should soon appear at
http://ozlabs.org/~akpm/mmots/broken-out/drivers-rtc-rtc-puv3c-use-dev_dbg-instead-of-pr_debug.patch
and later at
http://ozlabs.org/~akpm/mmotm/broken-out/drivers-rtc-rtc-puv3c-use-dev_dbg-instead-of-pr_debug.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
The -mm tree is included into linux-next and is updated
there every 3-4 working days
------------------------------------------------------
From: Sangjung Woo <sangjung.woo@xxxxxxxxxxx>
Subject: drivers/rtc/rtc-puv3.c: use dev_dbg() instead of pr_debug()
Because dev_*() are used along with pr_debug() function in this code, the
debug message is not tidy. This patch converts from pr_debug() to
dev_dbg() since dev_*() are encouraged to use in device driver code.
Signed-off-by: Sangjung Woo <sangjung.woo@xxxxxxxxxxx>
Cc: Guan Xuetao <gxt@xxxxxxxxxxxxxxx>
Cc: Alessandro Zummo <a.zummo@xxxxxxxxxxxx>
Cc: Joe Perches <joe@xxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/rtc/rtc-puv3.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff -puN drivers/rtc/rtc-puv3.c~drivers-rtc-rtc-puv3c-use-dev_dbg-instead-of-pr_debug drivers/rtc/rtc-puv3.c
--- a/drivers/rtc/rtc-puv3.c~drivers-rtc-rtc-puv3c-use-dev_dbg-instead-of-pr_debug
+++ a/drivers/rtc/rtc-puv3.c
@@ -53,11 +53,11 @@ static irqreturn_t puv3_rtc_tickirq(int
}
/* Update control registers */
-static void puv3_rtc_setaie(int to)
+static void puv3_rtc_setaie(struct device *dev, int to)
{
unsigned int tmp;
- pr_debug("%s: aie=%d\n", __func__, to);
+ dev_dbg(dev, "%s: aie=%d\n", __func__, to);
tmp = readl(RTC_RTSR) & ~RTC_RTSR_ALE;
@@ -71,7 +71,7 @@ static int puv3_rtc_setpie(struct device
{
unsigned int tmp;
- pr_debug("%s: pie=%d\n", __func__, enabled);
+ dev_debug(dev, "%s: pie=%d\n", __func__, enabled);
spin_lock_irq(&puv3_rtc_pie_lock);
tmp = readl(RTC_RTSR) & ~RTC_RTSR_HZE;
@@ -90,7 +90,7 @@ static int puv3_rtc_gettime(struct devic
{
rtc_time_to_tm(readl(RTC_RCNR), rtc_tm);
- pr_debug("read time %02x.%02x.%02x %02x/%02x/%02x\n",
+ dev_dbg(dev, "read time %02x.%02x.%02x %02x/%02x/%02x\n",
rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday,
rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec);
@@ -101,7 +101,7 @@ static int puv3_rtc_settime(struct devic
{
unsigned long rtc_count = 0;
- pr_debug("set time %02d.%02d.%02d %02d/%02d/%02d\n",
+ dev_dbg(dev, "set time %02d.%02d.%02d %02d/%02d/%02d\n",
tm->tm_year, tm->tm_mon, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
@@ -119,7 +119,7 @@ static int puv3_rtc_getalarm(struct devi
alrm->enabled = readl(RTC_RTSR) & RTC_RTSR_ALE;
- pr_debug("read alarm %02x %02x.%02x.%02x %02x/%02x/%02x\n",
+ dev_dbg(dev, "read alarm %02x %02x.%02x.%02x %02x/%02x/%02x\n",
alrm->enabled,
alm_tm->tm_year, alm_tm->tm_mon, alm_tm->tm_mday,
alm_tm->tm_hour, alm_tm->tm_min, alm_tm->tm_sec);
@@ -132,7 +132,7 @@ static int puv3_rtc_setalarm(struct devi
struct rtc_time *tm = &alrm->time;
unsigned long rtcalarm_count = 0;
- pr_debug("puv3_rtc_setalarm: %d, %02x/%02x/%02x %02x.%02x.%02x\n",
+ dev_dbg(dev, "puv3_rtc_setalarm: %d, %02x/%02x/%02x %02x.%02x.%02x\n",
alrm->enabled,
tm->tm_mday & 0xff, tm->tm_mon & 0xff, tm->tm_year & 0xff,
tm->tm_hour & 0xff, tm->tm_min & 0xff, tm->tm_sec);
@@ -140,7 +140,7 @@ static int puv3_rtc_setalarm(struct devi
rtc_tm_to_time(tm, &rtcalarm_count);
writel(rtcalarm_count, RTC_RTAR);
- puv3_rtc_setaie(alrm->enabled);
+ puv3_rtc_setaie(&dev->dev, alrm->enabled);
if (alrm->enabled)
enable_irq_wake(puv3_rtc_alarmno);
@@ -227,7 +227,7 @@ static int puv3_rtc_remove(struct platfo
rtc_device_unregister(rtc);
puv3_rtc_setpie(&dev->dev, 0);
- puv3_rtc_setaie(0);
+ puv3_rtc_setaie(&dev->dev, 0);
release_resource(puv3_rtc_mem);
kfree(puv3_rtc_mem);
@@ -241,7 +241,7 @@ static int puv3_rtc_probe(struct platfor
struct resource *res;
int ret;
- pr_debug("%s: probe=%p\n", __func__, pdev);
+ dev_dbg(&pdev->dev, "%s: probe=%p\n", __func__, pdev);
/* find the IRQs */
puv3_rtc_tickno = platform_get_irq(pdev, 1);
@@ -256,7 +256,7 @@ static int puv3_rtc_probe(struct platfor
return -ENOENT;
}
- pr_debug("PKUnity_rtc: tick irq %d, alarm irq %d\n",
+ dev_dbg(&pdev->dev, "PKUnity_rtc: tick irq %d, alarm irq %d\n",
puv3_rtc_tickno, puv3_rtc_alarmno);
/* get the memory region */
_
Patches currently in -mm which might be from sangjung.woo@xxxxxxxxxxx are
drivers-rtc-rtc-puv3c-use-dev_dbg-instead-of-pr_debug.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
