The patch titled
fs/Kconfig split: jffs2
has been removed from the -mm tree. Its filename is
fs-kconfig-split-jffs2.patch
This patch was dropped because the CONFIG_BLOCK stuff trashed it
------------------------------------------------------
Subject: fs/Kconfig split: jffs2
From: Alexey Dobriyan <adobriyan@xxxxxxxxx>
Part of a 44-patch series to split fs/Kconfig into many fs/<foo>/Kconfig
files. Not realy suitable for applying to subsystem git trees (please).
Signed-off-by: Alexey Dobriyan <adobriyan@xxxxxxxxx>
Cc: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
fs/Kconfig | 163 ---------------------------------------------
fs/jffs2/Kconfig | 161 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 162 insertions(+), 162 deletions(-)
diff -puN fs/Kconfig~fs-kconfig-split-jffs2 fs/Kconfig
--- a/fs/Kconfig~fs-kconfig-split-jffs2
+++ a/fs/Kconfig
@@ -194,168 +194,7 @@ source "fs/befs/Kconfig"
source "fs/bfs/Kconfig"
source "fs/efs/Kconfig"
source "fs/jffs/Kconfig"
-
-config JFFS2_FS
- tristate "Journalling Flash File System v2 (JFFS2) support"
- select CRC32
- depends on MTD
- help
- JFFS2 is the second generation of the Journalling Flash File System
- for use on diskless embedded devices. It provides improved wear
- levelling, compression and support for hard links. You cannot use
- this on normal block devices, only on 'MTD' devices.
-
- Further information on the design and implementation of JFFS2 is
- available at <http://sources.redhat.com/jffs2/>.
-
-config JFFS2_FS_DEBUG
- int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)"
- depends on JFFS2_FS
- default "0"
- help
- This controls the amount of debugging messages produced by the JFFS2
- code. Set it to zero for use in production systems. For evaluation,
- testing and debugging, it's advisable to set it to one. This will
- enable a few assertions and will print debugging messages at the
- KERN_DEBUG loglevel, where they won't normally be visible. Level 2
- is unlikely to be useful - it enables extra debugging in certain
- areas which at one point needed debugging, but when the bugs were
- located and fixed, the detailed messages were relegated to level 2.
-
- If reporting bugs, please try to have available a full dump of the
- messages at debug level 1 while the misbehaviour was occurring.
-
-config JFFS2_FS_WRITEBUFFER
- bool "JFFS2 write-buffering support"
- depends on JFFS2_FS
- default y
- help
- This enables the write-buffering support in JFFS2.
-
- This functionality is required to support JFFS2 on the following
- types of flash devices:
- - NAND flash
- - NOR flash with transparent ECC
- - DataFlash
-
-config JFFS2_SUMMARY
- bool "JFFS2 summary support (EXPERIMENTAL)"
- depends on JFFS2_FS && EXPERIMENTAL
- default n
- help
- This feature makes it possible to use summary information
- for faster filesystem mount.
-
- The summary information can be inserted into a filesystem image
- by the utility 'sumtool'.
-
- If unsure, say 'N'.
-
-config JFFS2_FS_XATTR
- bool "JFFS2 XATTR support (EXPERIMENTAL)"
- depends on JFFS2_FS && EXPERIMENTAL
- default n
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
-config JFFS2_FS_POSIX_ACL
- bool "JFFS2 POSIX Access Control Lists"
- depends on JFFS2_FS_XATTR
- default y
- select FS_POSIX_ACL
- help
- Posix Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the Posix ACLs for
- Linux website <http://acl.bestbits.at/>.
-
- If you don't know what Access Control Lists are, say N
-
-config JFFS2_FS_SECURITY
- bool "JFFS2 Security Labels"
- depends on JFFS2_FS_XATTR
- default y
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the jffs2 filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config JFFS2_COMPRESSION_OPTIONS
- bool "Advanced compression options for JFFS2"
- depends on JFFS2_FS
- default n
- help
- Enabling this option allows you to explicitly choose which
- compression modules, if any, are enabled in JFFS2. Removing
- compressors and mean you cannot read existing file systems,
- and enabling experimental compressors can mean that you
- write a file system which cannot be read by a standard kernel.
-
- If unsure, you should _definitely_ say 'N'.
-
-config JFFS2_ZLIB
- bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS
- select ZLIB_INFLATE
- select ZLIB_DEFLATE
- depends on JFFS2_FS
- default y
- help
- Zlib is designed to be a free, general-purpose, legally unencumbered,
- lossless data-compression library for use on virtually any computer
- hardware and operating system. See <http://www.gzip.org/zlib/> for
- further information.
-
- Say 'Y' if unsure.
-
-config JFFS2_RTIME
- bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
- depends on JFFS2_FS
- default y
- help
- Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
-
-config JFFS2_RUBIN
- bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
- depends on JFFS2_FS
- default n
- help
- RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
-
-choice
- prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
- default JFFS2_CMODE_PRIORITY
- depends on JFFS2_FS
- help
- You can set here the default compression mode of JFFS2 from
- the available compression modes. Don't touch if unsure.
-
-config JFFS2_CMODE_NONE
- bool "no compression"
- help
- Uses no compression.
-
-config JFFS2_CMODE_PRIORITY
- bool "priority"
- help
- Tries the compressors in a predefinied order and chooses the first
- successful one.
-
-config JFFS2_CMODE_SIZE
- bool "size (EXPERIMENTAL)"
- help
- Tries all compressors and chooses the one which has the smallest
- result.
-
-endchoice
+source "fs/jffs2/Kconfig"
config CRAMFS
tristate "Compressed ROM file system support (cramfs)"
diff -puN /dev/null fs/jffs2/Kconfig
--- /dev/null
+++ a/fs/jffs2/Kconfig
@@ -0,0 +1,161 @@
+config JFFS2_FS
+ tristate "Journalling Flash File System v2 (JFFS2) support"
+ select CRC32
+ depends on MTD
+ help
+ JFFS2 is the second generation of the Journalling Flash File System
+ for use on diskless embedded devices. It provides improved wear
+ levelling, compression and support for hard links. You cannot use
+ this on normal block devices, only on 'MTD' devices.
+
+ Further information on the design and implementation of JFFS2 is
+ available at <http://sources.redhat.com/jffs2/>.
+
+config JFFS2_FS_DEBUG
+ int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)"
+ depends on JFFS2_FS
+ default "0"
+ help
+ This controls the amount of debugging messages produced by the JFFS2
+ code. Set it to zero for use in production systems. For evaluation,
+ testing and debugging, it's advisable to set it to one. This will
+ enable a few assertions and will print debugging messages at the
+ KERN_DEBUG loglevel, where they won't normally be visible. Level 2
+ is unlikely to be useful - it enables extra debugging in certain
+ areas which at one point needed debugging, but when the bugs were
+ located and fixed, the detailed messages were relegated to level 2.
+
+ If reporting bugs, please try to have available a full dump of the
+ messages at debug level 1 while the misbehaviour was occurring.
+
+config JFFS2_FS_WRITEBUFFER
+ bool "JFFS2 write-buffering support"
+ depends on JFFS2_FS
+ default y
+ help
+ This enables the write-buffering support in JFFS2.
+
+ This functionality is required to support JFFS2 on the following
+ types of flash devices:
+ - NAND flash
+ - NOR flash with transparent ECC
+ - DataFlash
+
+config JFFS2_SUMMARY
+ bool "JFFS2 summary support (EXPERIMENTAL)"
+ depends on JFFS2_FS && EXPERIMENTAL
+ default n
+ help
+ This feature makes it possible to use summary information
+ for faster filesystem mount.
+
+ The summary information can be inserted into a filesystem image
+ by the utility 'sumtool'.
+
+ If unsure, say 'N'.
+
+config JFFS2_FS_XATTR
+ bool "JFFS2 XATTR support (EXPERIMENTAL)"
+ depends on JFFS2_FS && EXPERIMENTAL
+ default n
+ help
+ Extended attributes are name:value pairs associated with inodes by
+ the kernel or by users (see the attr(5) manual page, or visit
+ <http://acl.bestbits.at/> for details).
+
+ If unsure, say N.
+
+config JFFS2_FS_POSIX_ACL
+ bool "JFFS2 POSIX Access Control Lists"
+ depends on JFFS2_FS_XATTR
+ default y
+ select FS_POSIX_ACL
+ help
+ Posix Access Control Lists (ACLs) support permissions for users and
+ groups beyond the owner/group/world scheme.
+
+ To learn more about Access Control Lists, visit the Posix ACLs for
+ Linux website <http://acl.bestbits.at/>.
+
+ If you don't know what Access Control Lists are, say N
+
+config JFFS2_FS_SECURITY
+ bool "JFFS2 Security Labels"
+ depends on JFFS2_FS_XATTR
+ default y
+ help
+ Security labels support alternative access control models
+ implemented by security modules like SELinux. This option
+ enables an extended attribute handler for file security
+ labels in the jffs2 filesystem.
+
+ If you are not using a security module that requires using
+ extended attributes for file security labels, say N.
+
+config JFFS2_COMPRESSION_OPTIONS
+ bool "Advanced compression options for JFFS2"
+ depends on JFFS2_FS
+ default n
+ help
+ Enabling this option allows you to explicitly choose which
+ compression modules, if any, are enabled in JFFS2. Removing
+ compressors and mean you cannot read existing file systems,
+ and enabling experimental compressors can mean that you
+ write a file system which cannot be read by a standard kernel.
+
+ If unsure, you should _definitely_ say 'N'.
+
+config JFFS2_ZLIB
+ bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS
+ select ZLIB_INFLATE
+ select ZLIB_DEFLATE
+ depends on JFFS2_FS
+ default y
+ help
+ Zlib is designed to be a free, general-purpose, legally unencumbered,
+ lossless data-compression library for use on virtually any computer
+ hardware and operating system. See <http://www.gzip.org/zlib/> for
+ further information.
+
+ Say 'Y' if unsure.
+
+config JFFS2_RTIME
+ bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
+ depends on JFFS2_FS
+ default y
+ help
+ Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
+
+config JFFS2_RUBIN
+ bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
+ depends on JFFS2_FS
+ default n
+ help
+ RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
+
+choice
+ prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
+ default JFFS2_CMODE_PRIORITY
+ depends on JFFS2_FS
+ help
+ You can set here the default compression mode of JFFS2 from
+ the available compression modes. Don't touch if unsure.
+
+config JFFS2_CMODE_NONE
+ bool "no compression"
+ help
+ Uses no compression.
+
+config JFFS2_CMODE_PRIORITY
+ bool "priority"
+ help
+ Tries the compressors in a predefinied order and chooses the first
+ successful one.
+
+config JFFS2_CMODE_SIZE
+ bool "size (EXPERIMENTAL)"
+ help
+ Tries all compressors and chooses the one which has the smallest
+ result.
+
+endchoice
_
Patches currently in -mm which might be from adobriyan@xxxxxxxxx are
asus_acpi-fix-proc-files-parsing.patch
asus_acpi-dont-printk-on-writing-garbage-to-proc-files.patch
git-alsa.patch
git-agpgart.patch
agph-constify-struct-agp_bridge_dataversion.patch
git-dvb.patch
ks0127-wire-up-i2c_add_driver-return-value.patch
config_pm=n-slim-drivers-ieee1394-ohci1394c.patch
git-libata-all.patch
git-net.patch
config_pm=n-slim-drivers-pcmcia.patch
i82092-wire-up-errors-from-pci_register_driver.patch
config_pm=n-slim-drivers-serial-8250_pcic.patch
megaraid-fix-warnings-when-config_proc_fs=n.patch
turn-usb_resume_both-into-static-inline.patch
git-xfs.patch
sh-fix-fpn_start-typo.patch
headers_check-improve-include-regexp.patch
headers_check-clarify-error-message.patch
task_struct-ifdef-missedem-v-ipc.patch
ifdef-blktrace-debugging-fields.patch
tty_ioc-keep-davej-sane.patch
ifdef-quota_read-quota_write.patch
reiserfs-ifdef-xattr_sem.patch
reiserfs-ifdef-acl-stuff-from-inode.patch
fsh-ifdef-security-fields.patch
config_pm=n-slim-drivers-parport-parport_serialc.patch
config_pm=n-slim-sound-oss-tridentc.patch
config_pm=n-slim-sound-oss-cs46xxc.patch
windfarm_smu_satc-simplify-around-i2c_add_driver.patch
cramfs-rewrite-init_cramfs_fs.patch
freevxfs-fix-leak-on-error-path.patch
cramfs-make-cramfs_uncompress_exit-return-void.patch
9p-fix-leak-on-error-path.patch
ban-register_filesystemnull.patch
jbd-use-build_bug_on-in-journal-init.patch
really-ignore-kmem_cache_destroy-return-value.patch
make-kmem_cache_destroy-return-void.patch
remove-null-check-in-register_nls.patch
make-kmem_cache_destroy-return-void-ecryptfs.patch
config_pm=n-slim-drivers-ide-pci-sc1200c.patch
fs-kconfig-split-jffs2.patch
fs-kconfig-split-cramfs.patch
fs-kconfig-split-freevxfs.patch
fs-kconfig-split-hpfs.patch
fs-kconfig-split-qnx4.patch
fs-kconfig-split-sysv.patch
fs-kconfig-split-ufs.patch
fs-kconfig-split-smbfs.patch
fs-kconfig-split-cifs.patch
fs-kconfig-split-ncpfs.patch
fs-kconfig-split-coda.patch
fs-kconfig-split-afs.patch
fs-kconfig-split-9p.patch
documentation-ioctl-messtxt-start-tree-wide-ioctl-registry.patch
ioctl-messtxt-xfs-typos.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
