The patch titled
fs/Kconfig split: ext3
has been removed from the -mm tree. Its filename is
fs-kconfig-split-ext3.patch
This patch was dropped because the CONFIG_BLOCK stuff trashed it
------------------------------------------------------
Subject: fs/Kconfig split: ext3
From: Alexey Dobriyan <adobriyan@xxxxxxxxx>
Part of a 44-patch series to split fs/Kconfig into many fs/<foo>/Kconfig
files. Not realy suitable for applying to subsystem git trees (please).
Signed-off-by: Alexey Dobriyan <adobriyan@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
fs/Kconfig | 70 ----------------------------------------------
fs/ext3/Kconfig | 69 +++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 70 insertions(+), 69 deletions(-)
diff -puN fs/Kconfig~fs-kconfig-split-ext3 fs/Kconfig
--- a/fs/Kconfig~fs-kconfig-split-ext3
+++ a/fs/Kconfig
@@ -11,75 +11,7 @@ config FS_XIP
depends on EXT2_FS_XIP
default y
-config EXT3_FS
- tristate "Ext3 journalling file system support"
- select JBD
- help
- This is the journaling version of the Second extended file system
- (often called ext3), the de facto standard Linux file system
- (method to organize files on a storage device) for hard disks.
-
- The journaling code included in this driver means you do not have
- to run e2fsck (file system checker) on your file systems after a
- crash. The journal keeps track of any changes that were being made
- at the time the system crashed, and can ensure that your file system
- is consistent without the need for a lengthy check.
-
- Other than adding the journal to the file system, the on-disk format
- of ext3 is identical to ext2. It is possible to freely switch
- between using the ext3 driver and the ext2 driver, as long as the
- file system has been cleanly unmounted, or e2fsck is run on the file
- system.
-
- To add a journal on an existing ext2 file system or change the
- behavior of ext3 file systems, you can use the tune2fs utility ("man
- tune2fs"). To modify attributes of files and directories on ext3
- file systems, use chattr ("man chattr"). You need to be using
- e2fsprogs version 1.20 or later in order to create ext3 journals
- (available at <http://sourceforge.net/projects/e2fsprogs/>).
-
- To compile this file system support as a module, choose M here: the
- module will be called ext3. Be aware however that the file system
- of your root partition (the one containing the directory /) cannot
- be compiled as a module, and so this may be dangerous.
-
-config EXT3_FS_XATTR
- bool "Ext3 extended attributes"
- depends on EXT3_FS
- default y
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
- You need this for POSIX ACL support on ext3.
-
-config EXT3_FS_POSIX_ACL
- bool "Ext3 POSIX Access Control Lists"
- depends on EXT3_FS_XATTR
- select FS_POSIX_ACL
- help
- Posix Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the Posix ACLs for
- Linux website <http://acl.bestbits.at/>.
-
- If you don't know what Access Control Lists are, say N
-
-config EXT3_FS_SECURITY
- bool "Ext3 Security Labels"
- depends on EXT3_FS_XATTR
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the ext3 filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
+source "fs/ext3/Kconfig"
config JBD
tristate
diff -puN /dev/null fs/ext3/Kconfig
--- /dev/null
+++ a/fs/ext3/Kconfig
@@ -0,0 +1,69 @@
+config EXT3_FS
+ tristate "Ext3 journalling file system support"
+ select JBD
+ help
+ This is the journaling version of the Second extended file system
+ (often called ext3), the de facto standard Linux file system
+ (method to organize files on a storage device) for hard disks.
+
+ The journaling code included in this driver means you do not have
+ to run e2fsck (file system checker) on your file systems after a
+ crash. The journal keeps track of any changes that were being made
+ at the time the system crashed, and can ensure that your file system
+ is consistent without the need for a lengthy check.
+
+ Other than adding the journal to the file system, the on-disk format
+ of ext3 is identical to ext2. It is possible to freely switch
+ between using the ext3 driver and the ext2 driver, as long as the
+ file system has been cleanly unmounted, or e2fsck is run on the file
+ system.
+
+ To add a journal on an existing ext2 file system or change the
+ behavior of ext3 file systems, you can use the tune2fs utility ("man
+ tune2fs"). To modify attributes of files and directories on ext3
+ file systems, use chattr ("man chattr"). You need to be using
+ e2fsprogs version 1.20 or later in order to create ext3 journals
+ (available at <http://sourceforge.net/projects/e2fsprogs/>).
+
+ To compile this file system support as a module, choose M here: the
+ module will be called ext3. Be aware however that the file system
+ of your root partition (the one containing the directory /) cannot
+ be compiled as a module, and so this may be dangerous.
+
+config EXT3_FS_XATTR
+ bool "Ext3 extended attributes"
+ depends on EXT3_FS
+ default y
+ help
+ Extended attributes are name:value pairs associated with inodes by
+ the kernel or by users (see the attr(5) manual page, or visit
+ <http://acl.bestbits.at/> for details).
+
+ If unsure, say N.
+
+ You need this for POSIX ACL support on ext3.
+
+config EXT3_FS_POSIX_ACL
+ bool "Ext3 POSIX Access Control Lists"
+ depends on EXT3_FS_XATTR
+ select FS_POSIX_ACL
+ help
+ Posix Access Control Lists (ACLs) support permissions for users and
+ groups beyond the owner/group/world scheme.
+
+ To learn more about Access Control Lists, visit the Posix ACLs for
+ Linux website <http://acl.bestbits.at/>.
+
+ If you don't know what Access Control Lists are, say N
+
+config EXT3_FS_SECURITY
+ bool "Ext3 Security Labels"
+ depends on EXT3_FS_XATTR
+ help
+ Security labels support alternative access control models
+ implemented by security modules like SELinux. This option
+ enables an extended attribute handler for file security
+ labels in the ext3 filesystem.
+
+ If you are not using a security module that requires using
+ extended attributes for file security labels, say N.
_
Patches currently in -mm which might be from adobriyan@xxxxxxxxx are
asus_acpi-fix-proc-files-parsing.patch
asus_acpi-dont-printk-on-writing-garbage-to-proc-files.patch
git-alsa.patch
git-agpgart.patch
agph-constify-struct-agp_bridge_dataversion.patch
git-dvb.patch
ks0127-wire-up-i2c_add_driver-return-value.patch
config_pm=n-slim-drivers-ieee1394-ohci1394c.patch
git-libata-all.patch
git-net.patch
config_pm=n-slim-drivers-pcmcia.patch
i82092-wire-up-errors-from-pci_register_driver.patch
config_pm=n-slim-drivers-serial-8250_pcic.patch
megaraid-fix-warnings-when-config_proc_fs=n.patch
turn-usb_resume_both-into-static-inline.patch
git-xfs.patch
sh-fix-fpn_start-typo.patch
headers_check-improve-include-regexp.patch
headers_check-clarify-error-message.patch
task_struct-ifdef-missedem-v-ipc.patch
ifdef-blktrace-debugging-fields.patch
tty_ioc-keep-davej-sane.patch
ifdef-quota_read-quota_write.patch
reiserfs-ifdef-xattr_sem.patch
reiserfs-ifdef-acl-stuff-from-inode.patch
fsh-ifdef-security-fields.patch
config_pm=n-slim-drivers-parport-parport_serialc.patch
config_pm=n-slim-sound-oss-tridentc.patch
config_pm=n-slim-sound-oss-cs46xxc.patch
windfarm_smu_satc-simplify-around-i2c_add_driver.patch
cramfs-rewrite-init_cramfs_fs.patch
freevxfs-fix-leak-on-error-path.patch
cramfs-make-cramfs_uncompress_exit-return-void.patch
9p-fix-leak-on-error-path.patch
ban-register_filesystemnull.patch
jbd-use-build_bug_on-in-journal-init.patch
really-ignore-kmem_cache_destroy-return-value.patch
make-kmem_cache_destroy-return-void.patch
remove-null-check-in-register_nls.patch
make-kmem_cache_destroy-return-void-ecryptfs.patch
config_pm=n-slim-drivers-ide-pci-sc1200c.patch
fs-kconfig-split-ext3.patch
fs-kconfig-split-jbd.patch
fs-kconfig-split-reiserfs.patch
fs-kconfig-split-jfs.patch
fs-kconfig-split-ocfs2.patch
fs-kconfig-split-minix.patch
fs-kconfig-split-romfs.patch
fs-kconfig-split-autofs.patch
fs-kconfig-split-autofs4.patch
fs-kconfig-split-fuse.patch
fs-kconfig-split-isofs.patch
fs-kconfig-split-udf.patch
fs-kconfig-split-fat.patch
fs-kconfig-split-msdos.patch
fs-kconfig-split-vfat.patch
fs-kconfig-split-ntfs.patch
fs-kconfig-split-proc.patch
fs-kconfig-split-sysfs.patch
fs-kconfig-split-hugetlbfs.patch
fs-kconfig-split-ramfs.patch
fs-kconfig-split-configfs.patch
fs-kconfig-split-adfs.patch
fs-kconfig-split-affs.patch
fs-kconfig-split-ecryptfs.patch
fs-kconfig-split-hfs.patch
fs-kconfig-split-hfsplus.patch
fs-kconfig-split-befs.patch
fs-kconfig-split-bfs.patch
fs-kconfig-split-efs.patch
fs-kconfig-split-jffs.patch
fs-kconfig-split-jffs2.patch
fs-kconfig-split-cramfs.patch
fs-kconfig-split-freevxfs.patch
fs-kconfig-split-hpfs.patch
fs-kconfig-split-qnx4.patch
fs-kconfig-split-sysv.patch
fs-kconfig-split-ufs.patch
fs-kconfig-split-smbfs.patch
fs-kconfig-split-cifs.patch
fs-kconfig-split-ncpfs.patch
fs-kconfig-split-coda.patch
fs-kconfig-split-afs.patch
fs-kconfig-split-9p.patch
documentation-ioctl-messtxt-start-tree-wide-ioctl-registry.patch
ioctl-messtxt-xfs-typos.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
