+ fs-kconfig-split-ufs.patch added to -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch titled

     fs/Kconfig split: ufs

has been added to the -mm tree.  Its filename is

     fs-kconfig-split-ufs.patch

See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this

------------------------------------------------------
Subject: fs/Kconfig split: ufs
From: Alexey Dobriyan <adobriyan@xxxxxxxxx>

Part of a 44-patch series to split fs/Kconfig into many fs/<foo>/Kconfig
files.  Not realy suitable for applying to subsystem git trees (please).

Signed-off-by: Alexey Dobriyan <adobriyan@xxxxxxxxx>
Cc: Evgeniy Dushistov <dushistov@xxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---

 fs/Kconfig     |   49 -----------------------------------------------
 fs/ufs/Kconfig |   46 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 47 insertions(+), 48 deletions(-)

diff -puN fs/Kconfig~fs-kconfig-split-ufs fs/Kconfig
--- a/fs/Kconfig~fs-kconfig-split-ufs
+++ a/fs/Kconfig
@@ -200,54 +200,7 @@ source "fs/freevxfs/Kconfig"
 source "fs/hpfs/Kconfig"
 source "fs/qnx4/Kconfig"
 source "fs/sysv/Kconfig"
-
-config UFS_FS
-	tristate "UFS file system support (read only)"
-	help
-	  BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
-	  OpenBSD and NeXTstep) use a file system called UFS. Some System V
-	  Unixes can create and mount hard disk partitions and diskettes using
-	  this file system as well. Saying Y here will allow you to read from
-	  these partitions; if you also want to write to them, say Y to the
-	  experimental "UFS file system write support", below. Please read the
-	  file <file:Documentation/filesystems/ufs.txt> for more information.
-
-          The recently released UFS2 variant (used in FreeBSD 5.x) is
-          READ-ONLY supported.
-
-	  If you only intend to mount files from some other Unix over the
-	  network using NFS, you don't need the UFS file system support (but
-	  you need NFS file system support obviously).
-
-	  Note that this option is generally not needed for floppies, since a
-	  good portable way to transport files and directories between unixes
-	  (and even other operating systems) is given by the tar program ("man
-	  tar" or preferably "info tar").
-
-	  When accessing NeXTstep files, you may need to convert them from the
-	  NeXT character set to the Latin1 character set; use the program
-	  recode ("info recode") for this purpose.
-
-	  To compile the UFS file system support as a module, choose M here: the
-	  module will be called ufs.
-
-	  If you haven't heard about all of this before, it's safe to say N.
-
-config UFS_FS_WRITE
-	bool "UFS file system write support (DANGEROUS)"
-	depends on UFS_FS && EXPERIMENTAL
-	help
-	  Say Y here if you want to try writing to UFS partitions. This is
-	  experimental, so you should back up your UFS partitions beforehand.
-
-config UFS_DEBUG
-	bool "UFS debugging"
-	depends on UFS_FS
-	help
-	  If you are experiencing any problems with the UFS filesystem, say
-	  Y here.  This will result in _many_ additional debugging messages to be
-	  written to the system log.
-
+source "fs/ufs/Kconfig"
 endmenu
 
 menu "Network File Systems"
diff -puN /dev/null fs/ufs/Kconfig
--- /dev/null
+++ a/fs/ufs/Kconfig
@@ -0,0 +1,46 @@
+config UFS_FS
+	tristate "UFS file system support (read only)"
+	help
+	  BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
+	  OpenBSD and NeXTstep) use a file system called UFS. Some System V
+	  Unixes can create and mount hard disk partitions and diskettes using
+	  this file system as well. Saying Y here will allow you to read from
+	  these partitions; if you also want to write to them, say Y to the
+	  experimental "UFS file system write support", below. Please read the
+	  file <file:Documentation/filesystems/ufs.txt> for more information.
+
+          The recently released UFS2 variant (used in FreeBSD 5.x) is
+          READ-ONLY supported.
+
+	  If you only intend to mount files from some other Unix over the
+	  network using NFS, you don't need the UFS file system support (but
+	  you need NFS file system support obviously).
+
+	  Note that this option is generally not needed for floppies, since a
+	  good portable way to transport files and directories between unixes
+	  (and even other operating systems) is given by the tar program ("man
+	  tar" or preferably "info tar").
+
+	  When accessing NeXTstep files, you may need to convert them from the
+	  NeXT character set to the Latin1 character set; use the program
+	  recode ("info recode") for this purpose.
+
+	  To compile the UFS file system support as a module, choose M here: the
+	  module will be called ufs.
+
+	  If you haven't heard about all of this before, it's safe to say N.
+
+config UFS_FS_WRITE
+	bool "UFS file system write support (DANGEROUS)"
+	depends on UFS_FS && EXPERIMENTAL
+	help
+	  Say Y here if you want to try writing to UFS partitions. This is
+	  experimental, so you should back up your UFS partitions beforehand.
+
+config UFS_DEBUG
+	bool "UFS debugging"
+	depends on UFS_FS
+	help
+	  If you are experiencing any problems with the UFS filesystem, say
+	  Y here.  This will result in _many_ additional debugging messages to be
+	  written to the system log.
_

Patches currently in -mm which might be from adobriyan@xxxxxxxxx are

emu10k1x-simplify-around-pci_register_driver.patch
git-agpgart.patch
config_pm=n-slim-drivers-media-video.patch
config_pm=n-slim-drivers-ieee1394-ohci1394c.patch
config_pm=n-slim-drivers-scsi-sata_sil.patch
xircom_cb-wire-up-errors-from-pci_register_driver.patch
config_pm=n-slim-drivers-pcmcia.patch
i82092-wire-up-errors-from-pci_register_driver.patch
config_pm=n-slim-drivers-serial-8250_pcic.patch
megaraid-fix-warnings-when-config_proc_fs=n.patch
git-xfs.patch
sh-fix-fpn_start-typo.patch
headers_check-improve-include-regexp.patch
headers_check-clarify-error-message.patch
task_struct-ifdef-missedem-v-ipc.patch
ifdef-blktrace-debugging-fields.patch
tty_ioc-keep-davej-sane.patch
ifdef-quota_read-quota_write.patch
reiserfs-ifdef-xattr_sem.patch
reiserfs-ifdef-acl-stuff-from-inode.patch
fsh-ifdef-security-fields.patch
config_pm=n-slim-drivers-parport-parport_serialc.patch
config_pm=n-slim-sound-oss-tridentc.patch
config_pm=n-slim-sound-oss-cs46xxc.patch
remove-null-check-in-register_nls.patch
config_pm=n-slim-drivers-ide-pci-sc1200c.patch
fs-kconfig-split-ext2.patch
fs-kconfig-split-ext3.patch
fs-kconfig-split-jbd.patch
fs-kconfig-split-reiserfs.patch
fs-kconfig-split-jfs.patch
fs-kconfig-split-ocfs2.patch
fs-kconfig-split-minix.patch
fs-kconfig-split-romfs.patch
fs-kconfig-split-autofs.patch
fs-kconfig-split-autofs4.patch
fs-kconfig-split-fuse.patch
fs-kconfig-split-isofs.patch
fs-kconfig-split-udf.patch
fs-kconfig-split-fat.patch
fs-kconfig-split-msdos.patch
fs-kconfig-split-vfat.patch
fs-kconfig-split-ntfs.patch
fs-kconfig-split-proc.patch
fs-kconfig-split-sysfs.patch
fs-kconfig-split-hugetlbfs.patch
fs-kconfig-split-ramfs.patch
fs-kconfig-split-configfs.patch
fs-kconfig-split-adfs.patch
fs-kconfig-split-affs.patch
fs-kconfig-split-ecryptfs.patch
fs-kconfig-split-hfs.patch
fs-kconfig-split-hfsplus.patch
fs-kconfig-split-befs.patch
fs-kconfig-split-bfs.patch
fs-kconfig-split-efs.patch
fs-kconfig-split-jffs.patch
fs-kconfig-split-jffs2.patch
fs-kconfig-split-cramfs.patch
fs-kconfig-split-freevxfs.patch
fs-kconfig-split-hpfs.patch
fs-kconfig-split-qnx4.patch
fs-kconfig-split-sysv.patch
fs-kconfig-split-ufs.patch
fs-kconfig-split-smbfs.patch
fs-kconfig-split-cifs.patch
fs-kconfig-split-ncpfs.patch
fs-kconfig-split-coda.patch
fs-kconfig-split-afs.patch
fs-kconfig-split-9p.patch
documentation-ioctl-messtxt-start-tree-wide-ioctl-registry.patch
ioctl-messtxt-xfs-typos.patch

-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Kernel Newbies FAQ]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux