+ fs-kconfig-split-proc.patch added to -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch titled

     fs/Kconfig split: proc

has been added to the -mm tree.  Its filename is

     fs-kconfig-split-proc.patch

See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this

------------------------------------------------------
Subject: fs/Kconfig split: proc
From: Alexey Dobriyan <adobriyan@xxxxxxxxx>

Part of a 44-patch series to split fs/Kconfig into many fs/<foo>/Kconfig
files.  Not realy suitable for applying to subsystem git trees (please).

Signed-off-by: Alexey Dobriyan <adobriyan@xxxxxxxxx>
Cc: "Eric W. Biederman" <ebiederm@xxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---

 fs/Kconfig      |   61 ----------------------------------------------
 fs/proc/Kconfig |   59 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 60 insertions(+), 60 deletions(-)

diff -puN fs/Kconfig~fs-kconfig-split-proc fs/Kconfig
--- a/fs/Kconfig~fs-kconfig-split-proc
+++ a/fs/Kconfig
@@ -164,66 +164,7 @@ source "fs/ntfs/Kconfig"
 endmenu
 
 menu "Pseudo filesystems"
-
-config PROC_FS
-	bool "/proc file system support" if EMBEDDED
-	default y
-	help
-	  This is a virtual file system providing information about the status
-	  of the system. "Virtual" means that it doesn't take up any space on
-	  your hard disk: the files are created on the fly by the kernel when
-	  you try to access them. Also, you cannot read the files with older
-	  version of the program less: you need to use more or cat.
-
-	  It's totally cool; for example, "cat /proc/interrupts" gives
-	  information about what the different IRQs are used for at the moment
-	  (there is a small number of Interrupt ReQuest lines in your computer
-	  that are used by the attached devices to gain the CPU's attention --
-	  often a source of trouble if two devices are mistakenly configured
-	  to use the same IRQ). The program procinfo to display some
-	  information about your system gathered from the /proc file system.
-
-	  Before you can use the /proc file system, it has to be mounted,
-	  meaning it has to be given a location in the directory hierarchy.
-	  That location should be /proc. A command such as "mount -t proc proc
-	  /proc" or the equivalent line in /etc/fstab does the job.
-
-	  The /proc file system is explained in the file
-	  <file:Documentation/filesystems/proc.txt> and on the proc(5) manpage
-	  ("man 5 proc").
-
-	  This option will enlarge your kernel by about 67 KB. Several
-	  programs depend on this, so everyone should say Y here.
-
-config PROC_KCORE
-	bool "/proc/kcore support" if !ARM
-	depends on PROC_FS && MMU
-
-config PROC_VMCORE
-        bool "/proc/vmcore support (EXPERIMENTAL)"
-        depends on PROC_FS && EXPERIMENTAL && CRASH_DUMP
-	default y
-        help
-        Exports the dump image of crashed kernel in ELF format.
-
-config PROC_SYSCTL
-	bool "Sysctl support (/proc/sys)" if EMBEDDED
-	depends on PROC_FS
-	select SYSCTL
-	default y
-	---help---
-	  The sysctl interface provides a means of dynamically changing
-	  certain kernel parameters and variables on the fly without requiring
-	  a recompile of the kernel or reboot of the system.  The primary
-	  interface is through /proc/sys.  If you say Y here a tree of
-	  modifiable sysctl entries will be generated beneath the
-          /proc/sys directory. They are explained in the files
-	  in <file:Documentation/sysctl/>.  Note that enabling this
-	  option will enlarge the kernel by at least 8 KB.
-
-	  As it is generally a good thing, you should say Y here unless
-	  building a kernel for install/rescue disks or your system is very
-	  limited in memory.
+source "fs/proc/Kconfig"
 
 config SYSFS
 	bool "sysfs file system support" if EMBEDDED
diff -puN /dev/null fs/proc/Kconfig
--- /dev/null
+++ a/fs/proc/Kconfig
@@ -0,0 +1,59 @@
+config PROC_FS
+	bool "/proc file system support" if EMBEDDED
+	default y
+	help
+	  This is a virtual file system providing information about the status
+	  of the system. "Virtual" means that it doesn't take up any space on
+	  your hard disk: the files are created on the fly by the kernel when
+	  you try to access them. Also, you cannot read the files with older
+	  version of the program less: you need to use more or cat.
+
+	  It's totally cool; for example, "cat /proc/interrupts" gives
+	  information about what the different IRQs are used for at the moment
+	  (there is a small number of Interrupt ReQuest lines in your computer
+	  that are used by the attached devices to gain the CPU's attention --
+	  often a source of trouble if two devices are mistakenly configured
+	  to use the same IRQ). The program procinfo to display some
+	  information about your system gathered from the /proc file system.
+
+	  Before you can use the /proc file system, it has to be mounted,
+	  meaning it has to be given a location in the directory hierarchy.
+	  That location should be /proc. A command such as "mount -t proc proc
+	  /proc" or the equivalent line in /etc/fstab does the job.
+
+	  The /proc file system is explained in the file
+	  <file:Documentation/filesystems/proc.txt> and on the proc(5) manpage
+	  ("man 5 proc").
+
+	  This option will enlarge your kernel by about 67 KB. Several
+	  programs depend on this, so everyone should say Y here.
+
+config PROC_KCORE
+	bool "/proc/kcore support" if !ARM
+	depends on PROC_FS && MMU
+
+config PROC_VMCORE
+        bool "/proc/vmcore support (EXPERIMENTAL)"
+        depends on PROC_FS && EXPERIMENTAL && CRASH_DUMP
+	default y
+        help
+        Exports the dump image of crashed kernel in ELF format.
+
+config PROC_SYSCTL
+	bool "Sysctl support (/proc/sys)" if EMBEDDED
+	depends on PROC_FS
+	select SYSCTL
+	default y
+	---help---
+	  The sysctl interface provides a means of dynamically changing
+	  certain kernel parameters and variables on the fly without requiring
+	  a recompile of the kernel or reboot of the system.  The primary
+	  interface is through /proc/sys.  If you say Y here a tree of
+	  modifiable sysctl entries will be generated beneath the
+          /proc/sys directory. They are explained in the files
+	  in <file:Documentation/sysctl/>.  Note that enabling this
+	  option will enlarge the kernel by at least 8 KB.
+
+	  As it is generally a good thing, you should say Y here unless
+	  building a kernel for install/rescue disks or your system is very
+	  limited in memory.
_

Patches currently in -mm which might be from adobriyan@xxxxxxxxx are

emu10k1x-simplify-around-pci_register_driver.patch
git-agpgart.patch
config_pm=n-slim-drivers-media-video.patch
config_pm=n-slim-drivers-ieee1394-ohci1394c.patch
config_pm=n-slim-drivers-scsi-sata_sil.patch
xircom_cb-wire-up-errors-from-pci_register_driver.patch
config_pm=n-slim-drivers-pcmcia.patch
i82092-wire-up-errors-from-pci_register_driver.patch
config_pm=n-slim-drivers-serial-8250_pcic.patch
megaraid-fix-warnings-when-config_proc_fs=n.patch
git-xfs.patch
sh-fix-fpn_start-typo.patch
headers_check-improve-include-regexp.patch
headers_check-clarify-error-message.patch
task_struct-ifdef-missedem-v-ipc.patch
ifdef-blktrace-debugging-fields.patch
tty_ioc-keep-davej-sane.patch
ifdef-quota_read-quota_write.patch
reiserfs-ifdef-xattr_sem.patch
reiserfs-ifdef-acl-stuff-from-inode.patch
fsh-ifdef-security-fields.patch
config_pm=n-slim-drivers-parport-parport_serialc.patch
config_pm=n-slim-sound-oss-tridentc.patch
config_pm=n-slim-sound-oss-cs46xxc.patch
remove-null-check-in-register_nls.patch
config_pm=n-slim-drivers-ide-pci-sc1200c.patch
fs-kconfig-split-ext2.patch
fs-kconfig-split-ext3.patch
fs-kconfig-split-jbd.patch
fs-kconfig-split-reiserfs.patch
fs-kconfig-split-jfs.patch
fs-kconfig-split-ocfs2.patch
fs-kconfig-split-minix.patch
fs-kconfig-split-romfs.patch
fs-kconfig-split-autofs.patch
fs-kconfig-split-autofs4.patch
fs-kconfig-split-fuse.patch
fs-kconfig-split-isofs.patch
fs-kconfig-split-udf.patch
fs-kconfig-split-fat.patch
fs-kconfig-split-msdos.patch
fs-kconfig-split-vfat.patch
fs-kconfig-split-ntfs.patch
fs-kconfig-split-proc.patch
fs-kconfig-split-sysfs.patch
fs-kconfig-split-hugetlbfs.patch
fs-kconfig-split-ramfs.patch
fs-kconfig-split-configfs.patch
fs-kconfig-split-adfs.patch
fs-kconfig-split-affs.patch
fs-kconfig-split-ecryptfs.patch
fs-kconfig-split-hfs.patch
fs-kconfig-split-hfsplus.patch
fs-kconfig-split-befs.patch
fs-kconfig-split-bfs.patch
fs-kconfig-split-efs.patch
fs-kconfig-split-jffs.patch
fs-kconfig-split-jffs2.patch
fs-kconfig-split-cramfs.patch
fs-kconfig-split-freevxfs.patch
fs-kconfig-split-hpfs.patch
fs-kconfig-split-qnx4.patch
fs-kconfig-split-sysv.patch
fs-kconfig-split-ufs.patch
fs-kconfig-split-smbfs.patch
fs-kconfig-split-cifs.patch
fs-kconfig-split-ncpfs.patch
fs-kconfig-split-coda.patch
fs-kconfig-split-afs.patch
fs-kconfig-split-9p.patch
documentation-ioctl-messtxt-start-tree-wide-ioctl-registry.patch
ioctl-messtxt-xfs-typos.patch

-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Kernel Newbies FAQ]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux