The patch titled
fs/Kconfig split: jbd
has been added to the -mm tree. Its filename is
fs-kconfig-split-jbd.patch
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: fs/Kconfig split: jbd
From: Alexey Dobriyan <adobriyan@xxxxxxxxx>
Part of a 44-patch series to split fs/Kconfig into many fs/<foo>/Kconfig
files. Not realy suitable for applying to subsystem git trees (please).
Signed-off-by: Alexey Dobriyan <adobriyan@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
fs/Kconfig | 33 +--------------------------------
fs/jbd/Kconfig | 31 +++++++++++++++++++++++++++++++
2 files changed, 32 insertions(+), 32 deletions(-)
diff -puN fs/Kconfig~fs-kconfig-split-jbd fs/Kconfig
--- a/fs/Kconfig~fs-kconfig-split-jbd
+++ a/fs/Kconfig
@@ -12,38 +12,7 @@ config FS_XIP
default y
source "fs/ext3/Kconfig"
-
-config JBD
- tristate
- help
- This is a generic journaling layer for block devices. It is
- currently used by the ext3 and OCFS2 file systems, but it could
- also be used to add journal support to other file systems or block
- devices such as RAID or LVM.
-
- If you are using the ext3 or OCFS2 file systems, you need to
- say Y here. If you are not using ext3 OCFS2 then you will probably
- want to say N.
-
- To compile this device as a module, choose M here: the module will be
- called jbd. If you are compiling ext3 or OCFS2 into the kernel,
- you cannot compile this code as a module.
-
-config JBD_DEBUG
- bool "JBD (ext3) debugging support"
- depends on JBD
- help
- If you are using the ext3 journaled file system (or potentially any
- other file system/device using JBD), this option allows you to
- enable debugging output while the system is running, in order to
- help track down any problems you are having. By default the
- debugging output will be turned off.
-
- If you select Y here, then you will be able to turn on debugging
- with "echo N > /proc/sys/fs/jbd-debug", where N is a number between
- 1 and 5, the higher the number, the more debugging output is
- generated. To turn debugging off again, do
- "echo 0 > /proc/sys/fs/jbd-debug".
+source "fs/jbd/Kconfig"
config FS_MBCACHE
# Meta block cache for Extended Attributes (ext2/ext3)
diff -puN /dev/null fs/jbd/Kconfig
--- /dev/null
+++ a/fs/jbd/Kconfig
@@ -0,0 +1,31 @@
+config JBD
+ tristate
+ help
+ This is a generic journaling layer for block devices. It is
+ currently used by the ext3 and OCFS2 file systems, but it could
+ also be used to add journal support to other file systems or block
+ devices such as RAID or LVM.
+
+ If you are using the ext3 or OCFS2 file systems, you need to
+ say Y here. If you are not using ext3 OCFS2 then you will probably
+ want to say N.
+
+ To compile this device as a module, choose M here: the module will be
+ called jbd. If you are compiling ext3 or OCFS2 into the kernel,
+ you cannot compile this code as a module.
+
+config JBD_DEBUG
+ bool "JBD (ext3) debugging support"
+ depends on JBD
+ help
+ If you are using the ext3 journaled file system (or potentially any
+ other file system/device using JBD), this option allows you to
+ enable debugging output while the system is running, in order to
+ help track down any problems you are having. By default the
+ debugging output will be turned off.
+
+ If you select Y here, then you will be able to turn on debugging
+ with "echo N > /proc/sys/fs/jbd-debug", where N is a number between
+ 1 and 5, the higher the number, the more debugging output is
+ generated. To turn debugging off again, do
+ "echo 0 > /proc/sys/fs/jbd-debug".
_
Patches currently in -mm which might be from adobriyan@xxxxxxxxx are
emu10k1x-simplify-around-pci_register_driver.patch
git-agpgart.patch
config_pm=n-slim-drivers-media-video.patch
config_pm=n-slim-drivers-ieee1394-ohci1394c.patch
config_pm=n-slim-drivers-scsi-sata_sil.patch
xircom_cb-wire-up-errors-from-pci_register_driver.patch
config_pm=n-slim-drivers-pcmcia.patch
i82092-wire-up-errors-from-pci_register_driver.patch
config_pm=n-slim-drivers-serial-8250_pcic.patch
megaraid-fix-warnings-when-config_proc_fs=n.patch
git-xfs.patch
sh-fix-fpn_start-typo.patch
headers_check-improve-include-regexp.patch
headers_check-clarify-error-message.patch
task_struct-ifdef-missedem-v-ipc.patch
ifdef-blktrace-debugging-fields.patch
tty_ioc-keep-davej-sane.patch
ifdef-quota_read-quota_write.patch
reiserfs-ifdef-xattr_sem.patch
reiserfs-ifdef-acl-stuff-from-inode.patch
fsh-ifdef-security-fields.patch
config_pm=n-slim-drivers-parport-parport_serialc.patch
config_pm=n-slim-sound-oss-tridentc.patch
config_pm=n-slim-sound-oss-cs46xxc.patch
remove-null-check-in-register_nls.patch
config_pm=n-slim-drivers-ide-pci-sc1200c.patch
fs-kconfig-split-ext2.patch
fs-kconfig-split-ext3.patch
fs-kconfig-split-jbd.patch
fs-kconfig-split-reiserfs.patch
fs-kconfig-split-jfs.patch
fs-kconfig-split-ocfs2.patch
fs-kconfig-split-minix.patch
fs-kconfig-split-romfs.patch
fs-kconfig-split-autofs.patch
fs-kconfig-split-autofs4.patch
fs-kconfig-split-fuse.patch
fs-kconfig-split-isofs.patch
fs-kconfig-split-udf.patch
fs-kconfig-split-fat.patch
fs-kconfig-split-msdos.patch
fs-kconfig-split-vfat.patch
fs-kconfig-split-ntfs.patch
fs-kconfig-split-proc.patch
fs-kconfig-split-sysfs.patch
fs-kconfig-split-hugetlbfs.patch
fs-kconfig-split-ramfs.patch
fs-kconfig-split-configfs.patch
fs-kconfig-split-adfs.patch
fs-kconfig-split-affs.patch
fs-kconfig-split-ecryptfs.patch
fs-kconfig-split-hfs.patch
fs-kconfig-split-hfsplus.patch
fs-kconfig-split-befs.patch
fs-kconfig-split-bfs.patch
fs-kconfig-split-efs.patch
fs-kconfig-split-jffs.patch
fs-kconfig-split-jffs2.patch
fs-kconfig-split-cramfs.patch
fs-kconfig-split-freevxfs.patch
fs-kconfig-split-hpfs.patch
fs-kconfig-split-qnx4.patch
fs-kconfig-split-sysv.patch
fs-kconfig-split-ufs.patch
fs-kconfig-split-smbfs.patch
fs-kconfig-split-cifs.patch
fs-kconfig-split-ncpfs.patch
fs-kconfig-split-coda.patch
fs-kconfig-split-afs.patch
fs-kconfig-split-9p.patch
documentation-ioctl-messtxt-start-tree-wide-ioctl-registry.patch
ioctl-messtxt-xfs-typos.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
