The patch titled
au1100fb: Fix startup sequence
has been removed from the -mm tree. Its filename is
au1100fb-fix-startup-sequence.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: au1100fb: Fix startup sequence
From: Rodolfo Giometti <giometti@xxxxxxxx>
- fix up the start up sequence.
This new sequence allow you to correctly enable the LCD controller
even if the bootloader has already did it.
- fix up a wrong indentation issue.
Signed-off-by: Rodolfo Giometti <giometti@xxxxxxxx>
Signed-off-by: Antonino Daplas <adaplas@xxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
drivers/video/au1100fb.c | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)
diff -puN drivers/video/au1100fb.c~au1100fb-fix-startup-sequence drivers/video/au1100fb.c
--- a/drivers/video/au1100fb.c~au1100fb-fix-startup-sequence
+++ a/drivers/video/au1100fb.c
@@ -156,7 +156,7 @@ int au1100fb_setmode(struct au1100fb_dev
info->fix.visual = FB_VISUAL_TRUECOLOR;
info->fix.line_length = info->var.xres_virtual << 1; /* depth=16 */
- }
+ }
} else {
/* mono */
info->fix.visual = FB_VISUAL_MONO10;
@@ -169,16 +169,11 @@ int au1100fb_setmode(struct au1100fb_dev
/* Determine BPP mode and format */
fbdev->regs->lcd_control = fbdev->panel->control_base;
-
- fbdev->regs->lcd_intenable = 0;
- fbdev->regs->lcd_intstatus = 0;
-
fbdev->regs->lcd_horztiming = fbdev->panel->horztiming;
-
fbdev->regs->lcd_verttiming = fbdev->panel->verttiming;
-
fbdev->regs->lcd_clkcontrol = fbdev->panel->clkcontrol_base;
-
+ fbdev->regs->lcd_intenable = 0;
+ fbdev->regs->lcd_intstatus = 0;
fbdev->regs->lcd_dmaaddr0 = LCD_DMA_SA_N(fbdev->fb_phys);
if (panel_is_dual(fbdev->panel)) {
@@ -207,6 +202,8 @@ int au1100fb_setmode(struct au1100fb_dev
/* Resume controller */
fbdev->regs->lcd_control |= LCD_CONTROL_GO;
+ mdelay(10);
+ au1100fb_fb_blank(VESA_NO_BLANKING, info);
return 0;
}
_
Patches currently in -mm which might be from giometti@xxxxxxxx are
au1100fb-add-option-to-enable-disable-the-cursor.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
