+ x86-add-a-bootparameter-to-reserve-high-linear-address-space.patch added to -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch titled

     x86: add a bootparameter to reserve high linear address space

has been added to the -mm tree.  Its filename is

     x86-add-a-bootparameter-to-reserve-high-linear-address-space.patch

See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this

------------------------------------------------------
Subject: x86: add a bootparameter to reserve high linear address space
From: Jeremy Fitzhardinge <jeremy@xxxxxxxxxxxxx>

Add a boot parameter to reserve high linear address space for hypervisors. 
This is necessary to allow dynamically loaded hypervisor modules, which might
not happen until userspace is already running, and also provides a useful tool
to benchmark the performance impact of reduced lowmem address space.

Signed-off-by: Zachary Amsden <zach@xxxxxxxxxx>
Signed-off-by: Chris Wright <chrisw@xxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---

 Documentation/kernel-parameters.txt |    5 +++++
 arch/i386/kernel/setup.c            |   17 +++++++++++++++++
 2 files changed, 22 insertions(+)

diff -puN arch/i386/kernel/setup.c~x86-add-a-bootparameter-to-reserve-high-linear-address-space arch/i386/kernel/setup.c
--- a/arch/i386/kernel/setup.c~x86-add-a-bootparameter-to-reserve-high-linear-address-space
+++ a/arch/i386/kernel/setup.c
@@ -162,6 +162,12 @@ static char command_line[COMMAND_LINE_SI
 
 unsigned char __initdata boot_params[PARAM_SIZE];
 
+static int __init setup_reservetop(char *s)
+{
+	return 1;
+}
+__setup("reservetop", setup_reservetop);
+
 static struct resource data_resource = {
 	.name	= "Kernel data",
 	.start	= 0,
@@ -916,6 +922,17 @@ static void __init parse_cmdline_early (
 		else if (!memcmp(from, "vmalloc=", 8))
 			__VMALLOC_RESERVE = memparse(from+8, &from);
 
+		/*
+		 * reservetop=size reserves a hole at the top of the kernel
+		 * address space which a hypervisor can load into later.
+		 * Needed for dynamically loaded hypervisors, so relocating
+		 * the fixmap can be done before paging initialization.
+		 */
+		else if (!memcmp(from, "reservetop=", 11)) {
+			unsigned long reserve = memparse(from+11, &from);
+			reserve_top_address(reserve);
+		}
+
 	next_char:
 		c = *(from++);
 		if (!c)
diff -puN Documentation/kernel-parameters.txt~x86-add-a-bootparameter-to-reserve-high-linear-address-space Documentation/kernel-parameters.txt
--- a/Documentation/kernel-parameters.txt~x86-add-a-bootparameter-to-reserve-high-linear-address-space
+++ a/Documentation/kernel-parameters.txt
@@ -1357,6 +1357,11 @@ running once the system is up.
 
 	reserve=	[KNL,BUGS] Force the kernel to ignore some iomem area
 
+	reservetop=	[IA-32]
+			Format: nn[KMG]
+			Reserves a hole at the top of the kernel virtual
+			address space.
+
 	resume=		[SWSUSP]
 			Specify the partition device for software suspend
 
_

Patches currently in -mm which might be from jeremy@xxxxxxxxxxxxx are

x86-remove-locally-defined-ldt-structure-in-favour-of-standard-type.patch
x86-implement-always-locked-bit-ops-for-memory-shared-with-an-smp-hypervisor.patch
x86-allow-a-kernel-to-not-be-in-ring-0.patch
x86-replace-sensitive-instructions-with-macros.patch
x86-roll-all-the-cpuid-asm-into-one-__cpuid-call.patch
x86-make-__fixaddr_top-variable-to-allow-it-to-make-space-for-a-hypervisor.patch
x86-add-a-bootparameter-to-reserve-high-linear-address-space.patch
x86-put-note-sections-into-a-pt_note-segment-in-vmlinux.patch

-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Kernel Newbies FAQ]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux