The patch titled
usb: build fixes: ohci-omap
has been added to the -mm tree. Its filename is
usb-build-fixes-ohci-omap.patch
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: usb: build fixes: ohci-omap
From: David Brownell <david-b@xxxxxxxxxxx>
The ohci-omap code has diverged from the working version in the linux-omap
tree; this syncs up the versions:
- Another clock is needed in various cases
- The omap-1510 iommu code needs to be #ifdeffed out on newer parts
- Saner use of the HCD framework
- Various other changes, e.g. a Nokia 770 quirk
And some minor dead-whitespace removal.
Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
Cc: Greg KH <greg@xxxxxxxxx>
Cc: Komal Shah <komal_shah802003@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
drivers/usb/host/ohci-omap.c | 113 ++++++++++++++++++++-------------
1 file changed, 71 insertions(+), 42 deletions(-)
diff -puN drivers/usb/host/ohci-omap.c~usb-build-fixes-ohci-omap drivers/usb/host/ohci-omap.c
--- a/drivers/usb/host/ohci-omap.c~usb-build-fixes-ohci-omap
+++ a/drivers/usb/host/ohci-omap.c
@@ -4,7 +4,7 @@
* (C) Copyright 1999 Roman Weissgaerber <weissg@xxxxxxxxx>
* (C) Copyright 2000-2005 David Brownell
* (C) Copyright 2002 Hewlett-Packard Company
- *
+ *
* OMAP Bus Glue
*
* Modified for OMAP by Tony Lindgren <tony@xxxxxxxxxxx>
@@ -66,15 +66,20 @@ extern int usb_disabled(void);
extern int ocpi_enable(void);
static struct clk *usb_host_ck;
+static struct clk *usb_dc_ck;
+static int host_enabled;
+static int host_initialized;
static void omap_ohci_clock_power(int on)
{
if (on) {
+ clk_enable(usb_dc_ck);
clk_enable(usb_host_ck);
/* guesstimate for T5 == 1x 32K clock + APLL lock time */
udelay(100);
} else {
clk_disable(usb_host_ck);
+ clk_disable(usb_dc_ck);
}
}
@@ -87,14 +92,14 @@ static int omap_ohci_transceiver_power(i
if (on) {
if (machine_is_omap_innovator() && cpu_is_omap1510())
fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL)
- | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
+ | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
INNOVATOR_FPGA_CAM_USB_CONTROL);
else if (machine_is_omap_osk())
tps65010_set_gpio_out_value(GPIO1, LOW);
} else {
if (machine_is_omap_innovator() && cpu_is_omap1510())
fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL)
- & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
+ & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
INNOVATOR_FPGA_CAM_USB_CONTROL);
else if (machine_is_omap_osk())
tps65010_set_gpio_out_value(GPIO1, HIGH);
@@ -103,6 +108,7 @@ static int omap_ohci_transceiver_power(i
return 0;
}
+#ifdef CONFIG_ARCH_OMAP15XX
/*
* OMAP-1510 specific Local Bus clock on/off
*/
@@ -121,8 +127,8 @@ static int omap_1510_local_bus_power(int
/*
* OMAP-1510 specific Local Bus initialization
* NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE.
- * See also arch/mach-omap/memory.h for __virt_to_dma() and
- * __dma_to_virt() which need to match with the physical
+ * See also arch/mach-omap/memory.h for __virt_to_dma() and
+ * __dma_to_virt() which need to match with the physical
* Local Bus address below.
*/
static int omap_1510_local_bus_init(void)
@@ -130,7 +136,7 @@ static int omap_1510_local_bus_init(void
unsigned int tlb;
unsigned long lbaddr, physaddr;
- omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4,
+ omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4,
OMAP1510_LB_CLOCK_DIV);
/* Configure the Local Bus MMU table */
@@ -138,7 +144,7 @@ static int omap_1510_local_bus_init(void
lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET;
physaddr = tlb * 0x00100000 + PHYS_OFFSET;
omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H);
- omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc,
+ omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc,
OMAP1510_LB_MMU_CAM_L);
omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H);
omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L);
@@ -152,6 +158,10 @@ static int omap_1510_local_bus_init(void
return 0;
}
+#else
+#define omap_1510_local_bus_power(x) {}
+#define omap_1510_local_bus_init() {}
+#endif
#ifdef CONFIG_USB_OTG
@@ -173,13 +183,14 @@ static void start_hnp(struct ohci_hcd *o
/*-------------------------------------------------------------------------*/
-static int omap_start_hc(struct ohci_hcd *ohci, struct platform_device *pdev)
+static int ohci_omap_init(struct usb_hcd *hcd)
{
- struct omap_usb_config *config = pdev->dev.platform_data;
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ struct omap_usb_config *config = hcd->self.controller->platform_data;
int need_transceiver = (config->otg != 0);
int ret;
- dev_dbg(&pdev->dev, "starting USB Controller\n");
+ dev_dbg(hcd->self.controller, "starting USB Controller\n");
if (config->otg) {
ohci_to_hcd(ohci)->self.otg_port = config->otg;
@@ -200,7 +211,7 @@ static int omap_start_hc(struct ohci_hcd
if (ohci->transceiver) {
int status = otg_set_host(ohci->transceiver,
&ohci_to_hcd(ohci)->self);
- dev_dbg(&pdev->dev, "init %s transceiver, status %d\n",
+ dev_dbg(hcd->self.controller, "init %s transceiver, status %d\n",
ohci->transceiver->label, status);
if (status) {
if (ohci->transceiver)
@@ -208,7 +219,7 @@ static int omap_start_hc(struct ohci_hcd
return status;
}
} else {
- dev_err(&pdev->dev, "can't find transceiver\n");
+ dev_err(hcd->self.controller, "can't find transceiver\n");
return -ENODEV;
}
}
@@ -247,6 +258,10 @@ static int omap_start_hc(struct ohci_hcd
}
ohci_writel(ohci, rh, &ohci->regs->roothub.a);
distrust_firmware = 0;
+ } else if (machine_is_nokia770()) {
+ /* We require a self-powered hub, which should have
+ * plenty of power. */
+ ohci_to_hcd(ohci)->power_budget = 0;
}
/* FIXME khubd hub requests should manage power switching */
@@ -260,21 +275,15 @@ static int omap_start_hc(struct ohci_hcd
return 0;
}
-static void omap_stop_hc(struct platform_device *pdev)
+static void ohci_omap_stop(struct usb_hcd *hcd)
{
- dev_dbg(&pdev->dev, "stopping USB Controller\n");
+ dev_dbg(hcd->self.controller, "stopping USB Controller\n");
omap_ohci_clock_power(0);
}
/*-------------------------------------------------------------------------*/
-void usb_hcd_omap_remove (struct usb_hcd *, struct platform_device *);
-
-/* configure so an HC device and id are always provided */
-/* always called with process context; sleeping is OK */
-
-
/**
* usb_hcd_omap_probe - initialize OMAP-based HCDs
* Context: !in_interrupt()
@@ -283,7 +292,7 @@ void usb_hcd_omap_remove (struct usb_hcd
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*/
-int usb_hcd_omap_probe (const struct hc_driver *driver,
+static int usb_hcd_omap_probe (const struct hc_driver *driver,
struct platform_device *pdev)
{
int retval, irq;
@@ -291,12 +300,12 @@ int usb_hcd_omap_probe (const struct hc_
struct ohci_hcd *ohci;
if (pdev->num_resources != 2) {
- printk(KERN_ERR "hcd probe: invalid num_resources: %i\n",
+ printk(KERN_ERR "hcd probe: invalid num_resources: %i\n",
pdev->num_resources);
return -ENODEV;
}
- if (pdev->resource[0].flags != IORESOURCE_MEM
+ if (pdev->resource[0].flags != IORESOURCE_MEM
|| pdev->resource[1].flags != IORESOURCE_IRQ) {
printk(KERN_ERR "hcd probe: invalid resource type\n");
return -ENODEV;
@@ -306,6 +315,17 @@ int usb_hcd_omap_probe (const struct hc_
if (IS_ERR(usb_host_ck))
return PTR_ERR(usb_host_ck);
+ if (!cpu_is_omap1510())
+ usb_dc_ck = clk_get(0, "usb_dc_ck");
+ else
+ usb_dc_ck = clk_get(0, "lb_ck");
+
+ if (IS_ERR(usb_dc_ck)) {
+ clk_put(usb_host_ck);
+ return PTR_ERR(usb_dc_ck);
+ }
+
+
hcd = usb_create_hcd (driver, &pdev->dev, pdev->dev.bus_id);
if (!hcd) {
retval = -ENOMEM;
@@ -325,9 +345,8 @@ int usb_hcd_omap_probe (const struct hc_
ohci = hcd_to_ohci(hcd);
ohci_hcd_init(ohci);
- retval = omap_start_hc(ohci, pdev);
- if (retval < 0)
- goto err2;
+ host_initialized = 0;
+ host_enabled = 1;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
@@ -335,15 +354,21 @@ int usb_hcd_omap_probe (const struct hc_
goto err2;
}
retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
- if (retval == 0)
- return retval;
+ if (retval)
+ goto err2;
+
+ host_initialized = 1;
+
+ if (!host_enabled)
+ omap_ohci_clock_power(0);
- omap_stop_hc(pdev);
+ return 0;
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err1:
usb_put_hcd(hcd);
err0:
+ clk_put(usb_dc_ck);
clk_put(usb_host_ck);
return retval;
}
@@ -359,28 +384,36 @@ err0:
* Reverses the effect of usb_hcd_omap_probe(), first invoking
* the HCD's stop() method. It is always called from a thread
* context, normally "rmmod", "apmd", or something similar.
- *
*/
-void usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev)
+static inline void
+usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev)
{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+
usb_remove_hcd(hcd);
+ if (ohci->transceiver) {
+ (void) otg_set_host(ohci->transceiver, 0);
+ put_device(ohci->transceiver->dev);
+ }
if (machine_is_omap_osk())
omap_free_gpio(9);
- omap_stop_hc(pdev);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
+ clk_put(usb_dc_ck);
clk_put(usb_host_ck);
}
/*-------------------------------------------------------------------------*/
-static int __devinit
+static int
ohci_omap_start (struct usb_hcd *hcd)
{
struct omap_usb_config *config;
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int ret;
+ if (!host_enabled)
+ return 0;
config = hcd->self.controller->platform_data;
if (config->otg || config->rwc)
writel(OHCI_CTRL_RWC, &ohci->regs->control);
@@ -409,8 +442,9 @@ static const struct hc_driver ohci_omap_
/*
* basic lifecycle operations
*/
+ .reset = ohci_omap_init,
.start = ohci_omap_start,
- .stop = ohci_stop,
+ .stop = ohci_omap_stop,
.shutdown = ohci_shutdown,
/*
@@ -448,13 +482,8 @@ static int ohci_hcd_omap_drv_probe(struc
static int ohci_hcd_omap_drv_remove(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
usb_hcd_omap_remove(hcd, dev);
- if (ohci->transceiver) {
- (void) otg_set_host(ohci->transceiver, 0);
- put_device(ohci->transceiver->dev);
- }
platform_set_drvdata(dev, NULL);
return 0;
@@ -474,7 +503,7 @@ static int ohci_omap_suspend(struct plat
omap_ohci_clock_power(0);
ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
- dev->power.power_state = PMSG_SUSPEND;
+ dev->dev.power.power_state = PMSG_SUSPEND;
return 0;
}
@@ -487,8 +516,8 @@ static int ohci_omap_resume(struct platf
ohci->next_statechange = jiffies;
omap_ohci_clock_power(1);
- dev->power.power_state = PMSG_ON;
- usb_hcd_resume_root_hub(dev_get_drvdata(dev));
+ dev->dev.power.power_state = PMSG_ON;
+ usb_hcd_resume_root_hub(platform_get_drvdata(dev));
return 0;
}
_
Patches currently in -mm which might be from david-b@xxxxxxxxxxx are
origin.patch
i2c-build-fixes-tps65010.patch
git-pcmcia.patch
fix-broken-dubious-driver-suspend-methods.patch
pm-define-pm_event_prethaw.patch
pm-pci-and-ide-handle-pm_event_prethaw.patch
pm-video-drivers-and-pm_event_prethaw.patch
pm-usb-hcds-use-pm_event_prethaw.patch
pm-issue-pm_event_prethaw.patch
net1080-inherent-pad-length.patch
properly-unregister-reboot-notifier-in-case-of-failure-in-ehci-hcd.patch
usb-build-fixes-ohci-omap.patch
ide-reprogram-disk-pio-timings-on-resume.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
