- stex-add-new-device-ids.patch removed from -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch titled

     stex: add new device ids

has been removed from the -mm tree.  Its filename is

     stex-add-new-device-ids.patch

This patch was dropped because it was merged into mainline or a subsystem tree

------------------------------------------------------
Subject: stex: add new device ids
From: "Ed Lin" <ed.lin@xxxxxxxxxxx>

add new device ids

Signed-off-by: Ed Lin <ed.lin@xxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---

 drivers/scsi/stex.c |   21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

diff -puN drivers/scsi/stex.c~stex-add-new-device-ids drivers/scsi/stex.c
--- a/drivers/scsi/stex.c~stex-add-new-device-ids
+++ a/drivers/scsi/stex.c
@@ -118,6 +118,9 @@ enum {
 	ST_MAX_TARGET_NUM			= (ST_MAX_ARRAY_SUPPORTED+1),
 	ST_MAX_LUN_PER_TARGET			= 16,
 
+	st_shasta				= 0,
+	st_vsc					= 1,
+
 	PASSTHRU_REQ_TYPE			= 0x00000001,
 	PASSTHRU_REQ_NO_WAKEUP			= 0x00000100,
 	ST_INTERNAL_TIMEOUT			= 30,
@@ -275,6 +278,8 @@ struct st_hba {
 
 	unsigned int mu_status;
 	int out_req_cnt;
+
+	unsigned int cardtype;
 };
 
 static const char console_inq_page[] =
@@ -1043,6 +1048,8 @@ stex_probe(struct pci_dev *pdev, const s
 		(struct status_msg *)(hba->dma_mem + MU_REQ_BUFFER_SIZE);
 	hba->mu_status = MU_STATE_STARTING;
 
+	hba->cardtype = (unsigned int) id->driver_data;
+
 	/* firmware uses id/lun pair for a logical drive, but lun would be
 	   always 0 if CONFIG_SCSI_MULTI_LUN not configured, so we use
 	   channel to map lun here */
@@ -1163,12 +1170,14 @@ static void stex_shutdown(struct pci_dev
 }
 
 static struct pci_device_id stex_pci_tbl[] = {
-	{ PCI_VENDOR_ID_PROMISE, 0x8350, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_PROMISE, 0xf350, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_PROMISE, 0x4301, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_PROMISE, 0x4302, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_PROMISE, 0x8301, PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_PROMISE, 0x8302, PCI_ANY_ID, PCI_ANY_ID, },
+	{ 0x105a, 0x8350, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta },
+	{ 0x105a, 0xc350, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta },
+	{ 0x105a, 0xf350, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta },
+	{ 0x105a, 0x4301, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta },
+	{ 0x105a, 0x4302, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta },
+	{ 0x105a, 0x8301, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta },
+	{ 0x105a, 0x8302, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta },
+	{ 0x1725, 0x7250, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_vsc },
 	{ }	/* terminate list */
 };
 MODULE_DEVICE_TABLE(pci, stex_pci_tbl);
_

Patches currently in -mm which might be from ed.lin@xxxxxxxxxxx are

git-supertrak.patch

-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Kernel Newbies FAQ]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux