The patch titled
mmc: correct register order
has been removed from the -mm tree. Its filename is
mmc-correct-register-order.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: mmc: correct register order
From: Pierre Ossman <drzeus@xxxxxxxxx>
The sdhci specification states that some registers must be written to in a
specific order.
Signed-off-by: Pierre Ossman <drzeus@xxxxxxxxx>
Cc: Russell King <rmk@xxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
drivers/mmc/sdhci.c | 44 +++++++++++++++++++++++++-----------------
1 file changed, 27 insertions(+), 17 deletions(-)
diff -puN drivers/mmc/sdhci.c~mmc-correct-register-order drivers/mmc/sdhci.c
--- a/drivers/mmc/sdhci.c~mmc-correct-register-order
+++ a/drivers/mmc/sdhci.c
@@ -270,16 +270,13 @@ static void sdhci_transfer_pio(struct sd
static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
{
- u16 mode;
u8 count;
unsigned target_timeout, current_timeout;
WARN_ON(host->data);
- if (data == NULL) {
- writew(0, host->ioaddr + SDHCI_TRANSFER_MODE);
+ if (data == NULL)
return;
- }
DBG("blksz %04x blks %04x flags %08x\n",
data->blksz, data->blocks, data->flags);
@@ -317,19 +314,6 @@ static void sdhci_prepare_data(struct sd
writeb(count, host->ioaddr + SDHCI_TIMEOUT_CONTROL);
- mode = SDHCI_TRNS_BLK_CNT_EN;
- if (data->blocks > 1)
- mode |= SDHCI_TRNS_MULTI;
- if (data->flags & MMC_DATA_READ)
- mode |= SDHCI_TRNS_READ;
- if (host->flags & SDHCI_USE_DMA)
- mode |= SDHCI_TRNS_DMA;
-
- writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE);
-
- writew(data->blksz, host->ioaddr + SDHCI_BLOCK_SIZE);
- writew(data->blocks, host->ioaddr + SDHCI_BLOCK_COUNT);
-
if (host->flags & SDHCI_USE_DMA) {
int count;
@@ -347,6 +331,30 @@ static void sdhci_prepare_data(struct sd
host->offset = 0;
host->remain = host->cur_sg->length;
}
+
+ writew(data->blksz, host->ioaddr + SDHCI_BLOCK_SIZE);
+ writew(data->blocks, host->ioaddr + SDHCI_BLOCK_COUNT);
+}
+
+static void sdhci_set_transfer_mode(struct sdhci_host *host,
+ struct mmc_data *data)
+{
+ u16 mode;
+
+ WARN_ON(host->data);
+
+ if (data == NULL)
+ return;
+
+ mode = SDHCI_TRNS_BLK_CNT_EN;
+ if (data->blocks > 1)
+ mode |= SDHCI_TRNS_MULTI;
+ if (data->flags & MMC_DATA_READ)
+ mode |= SDHCI_TRNS_READ;
+ if (host->flags & SDHCI_USE_DMA)
+ mode |= SDHCI_TRNS_DMA;
+
+ writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE);
}
static void sdhci_finish_data(struct sdhci_host *host)
@@ -447,6 +455,8 @@ static void sdhci_send_command(struct sd
writel(cmd->arg, host->ioaddr + SDHCI_ARGUMENT);
+ sdhci_set_transfer_mode(host, cmd->data);
+
if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
printk(KERN_ERR "%s: Unsupported response type! "
"Please report this to " BUGMAIL ".\n",
_
Patches currently in -mm which might be from drzeus@xxxxxxxxx are
origin.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
