The patch titled
irq-flags: serial: Use the new IRQF_ constants
has been removed from the -mm tree. Its filename is
irq-flags-serial-use-the-new-irqf_-constansts.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: irq-flags: serial: Use the new IRQF_ constants
From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Ingo Molnar <mingo@xxxxxxx>
Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
Cc: Russell King <rmk@xxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
drivers/serial/8250.c | 4 ++--
drivers/serial/at91_serial.c | 2 +-
drivers/serial/crisv10.c | 22 +++++++++++-----------
drivers/serial/dz.c | 2 +-
drivers/serial/icom.c | 2 +-
drivers/serial/imx.c | 2 +-
drivers/serial/ioc4_serial.c | 2 +-
drivers/serial/jsm/jsm_driver.c | 2 +-
drivers/serial/m32r_sio.c | 2 +-
drivers/serial/mcfserial.c | 2 +-
drivers/serial/mpc52xx_uart.c | 2 +-
drivers/serial/mpsc.c | 2 +-
drivers/serial/pmac_zilog.c | 2 +-
drivers/serial/serial_txx9.c | 2 +-
drivers/serial/sh-sci.c | 4 ++--
drivers/serial/sn_console.c | 2 +-
drivers/serial/sunsab.c | 2 +-
drivers/serial/sunsu.c | 4 ++--
drivers/serial/sunzilog.c | 2 +-
drivers/serial/v850e_uart.c | 4 ++--
20 files changed, 34 insertions(+), 34 deletions(-)
diff -puN drivers/serial/8250.c~irq-flags-serial-use-the-new-irqf_-constansts drivers/serial/8250.c
--- a/drivers/serial/8250.c~irq-flags-serial-use-the-new-irqf_-constansts
+++ a/drivers/serial/8250.c
@@ -48,7 +48,7 @@
/*
* Configuration:
- * share_irqs - whether we pass SA_SHIRQ to request_irq(). This option
+ * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option
* is unsafe when used on edge-triggered interrupts.
*/
static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
@@ -1400,7 +1400,7 @@ static void serial_do_unlink(struct irq_
static int serial_link_irq_chain(struct uart_8250_port *up)
{
struct irq_info *i = irq_lists + up->port.irq;
- int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? SA_SHIRQ : 0;
+ int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
spin_lock_irq(&i->lock);
diff -puN drivers/serial/at91_serial.c~irq-flags-serial-use-the-new-irqf_-constansts drivers/serial/at91_serial.c
--- a/drivers/serial/at91_serial.c~irq-flags-serial-use-the-new-irqf_-constansts
+++ a/drivers/serial/at91_serial.c
@@ -387,7 +387,7 @@ static int at91_startup(struct uart_port
/*
* Allocate the IRQ
*/
- retval = request_irq(port->irq, at91_interrupt, SA_SHIRQ, "at91_serial", port);
+ retval = request_irq(port->irq, at91_interrupt, IRQF_SHARED, "at91_serial", port);
if (retval) {
printk("at91_serial: at91_startup - Can't get irq\n");
return retval;
diff -puN drivers/serial/crisv10.c~irq-flags-serial-use-the-new-irqf_-constansts drivers/serial/crisv10.c
--- a/drivers/serial/crisv10.c~irq-flags-serial-use-the-new-irqf_-constansts
+++ a/drivers/serial/crisv10.c
@@ -415,7 +415,7 @@
* Fixed DEF_TX value that caused the serial transmitter pin (txd) to go to 0 when
* closing the last filehandle, NASTY!.
* Added break generation, not tested though!
- * Use SA_SHIRQ when request_irq() for ser2 and ser3 (shared with) par0 and par1.
+ * Use IRQF_SHARED when request_irq() for ser2 and ser3 (shared with) par0 and par1.
* You can't use them at the same time (yet..), but you can hopefully switch
* between ser2/par0, ser3/par1 with the same kernel config.
* Replaced some magic constants with defines
@@ -4942,55 +4942,55 @@ rs_init(void)
/* Not needed in simulator. May only complicate stuff. */
/* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */
- if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial ", NULL))
+ if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial ", NULL))
panic("irq8");
#ifdef CONFIG_ETRAX_SERIAL_PORT0
#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
- if (request_irq(SER0_DMA_TX_IRQ_NBR, tr_interrupt, SA_INTERRUPT, "serial 0 dma tr", NULL))
+ if (request_irq(SER0_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_DISABLED, "serial 0 dma tr", NULL))
panic("irq22");
#endif
#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
- if (request_irq(SER0_DMA_RX_IRQ_NBR, rec_interrupt, SA_INTERRUPT, "serial 0 dma rec", NULL))
+ if (request_irq(SER0_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_DISABLED, "serial 0 dma rec", NULL))
panic("irq23");
#endif
#endif
#ifdef CONFIG_ETRAX_SERIAL_PORT1
#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT
- if (request_irq(SER1_DMA_TX_IRQ_NBR, tr_interrupt, SA_INTERRUPT, "serial 1 dma tr", NULL))
+ if (request_irq(SER1_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_DISABLED, "serial 1 dma tr", NULL))
panic("irq24");
#endif
#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN
- if (request_irq(SER1_DMA_RX_IRQ_NBR, rec_interrupt, SA_INTERRUPT, "serial 1 dma rec", NULL))
+ if (request_irq(SER1_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_DISABLED, "serial 1 dma rec", NULL))
panic("irq25");
#endif
#endif
#ifdef CONFIG_ETRAX_SERIAL_PORT2
/* DMA Shared with par0 (and SCSI0 and ATA) */
#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
- if (request_irq(SER2_DMA_TX_IRQ_NBR, tr_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 2 dma tr", NULL))
+ if (request_irq(SER2_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 2 dma tr", NULL))
panic("irq18");
#endif
#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
- if (request_irq(SER2_DMA_RX_IRQ_NBR, rec_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 2 dma rec", NULL))
+ if (request_irq(SER2_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 2 dma rec", NULL))
panic("irq19");
#endif
#endif
#ifdef CONFIG_ETRAX_SERIAL_PORT3
/* DMA Shared with par1 (and SCSI1 and Extern DMA 0) */
#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT
- if (request_irq(SER3_DMA_TX_IRQ_NBR, tr_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 3 dma tr", NULL))
+ if (request_irq(SER3_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 3 dma tr", NULL))
panic("irq20");
#endif
#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN
- if (request_irq(SER3_DMA_RX_IRQ_NBR, rec_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 3 dma rec", NULL))
+ if (request_irq(SER3_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 3 dma rec", NULL))
panic("irq21");
#endif
#endif
#ifdef CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST
- if (request_irq(TIMER1_IRQ_NBR, timeout_interrupt, SA_SHIRQ | SA_INTERRUPT,
+ if (request_irq(TIMER1_IRQ_NBR, timeout_interrupt, IRQF_SHARED | IRQF_DISABLED,
"fast serial dma timeout", NULL)) {
printk(KERN_CRIT "err: timer1 irq\n");
}
diff -puN drivers/serial/dz.c~irq-flags-serial-use-the-new-irqf_-constansts drivers/serial/dz.c
--- a/drivers/serial/dz.c~irq-flags-serial-use-the-new-irqf_-constansts
+++ a/drivers/serial/dz.c
@@ -797,7 +797,7 @@ int __init dz_init(void)
restore_flags(flags);
if (request_irq(dz_ports[0].port.irq, dz_interrupt,
- SA_INTERRUPT, "DZ", &dz_ports[0]))
+ IRQF_DISABLED, "DZ", &dz_ports[0]))
panic("Unable to register DZ interrupt");
ret = uart_register_driver(&dz_reg);
diff -puN drivers/serial/icom.c~irq-flags-serial-use-the-new-irqf_-constansts drivers/serial/icom.c
--- a/drivers/serial/icom.c~irq-flags-serial-use-the-new-irqf_-constansts
+++ a/drivers/serial/icom.c
@@ -1563,7 +1563,7 @@ static int __devinit icom_probe(struct p
/* save off irq and request irq line */
if ( (retval = request_irq(dev->irq, icom_interrupt,
- SA_INTERRUPT | SA_SHIRQ, ICOM_DRIVER_NAME,
+ IRQF_DISABLED | IRQF_SHARED, ICOM_DRIVER_NAME,
(void *) icom_adapter))) {
goto probe_exit2;
}
diff -puN drivers/serial/imx.c~irq-flags-serial-use-the-new-irqf_-constansts drivers/serial/imx.c
--- a/drivers/serial/imx.c~irq-flags-serial-use-the-new-irqf_-constansts
+++ a/drivers/serial/imx.c
@@ -404,7 +404,7 @@ static int imx_startup(struct uart_port
if (retval) goto error_out2;
retval = request_irq(sport->rtsirq, imx_rtsint,
- SA_TRIGGER_FALLING | SA_TRIGGER_RISING,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
DRIVER_NAME, sport);
if (retval) goto error_out3;
diff -puN drivers/serial/ioc4_serial.c~irq-flags-serial-use-the-new-irqf_-constansts drivers/serial/ioc4_serial.c
--- a/drivers/serial/ioc4_serial.c~irq-flags-serial-use-the-new-irqf_-constansts
+++ a/drivers/serial/ioc4_serial.c
@@ -2855,7 +2855,7 @@ ioc4_serial_attach_one(struct ioc4_drive
control->ic_soft = soft;
/* Hook up interrupt handler */
- if (!request_irq(idd->idd_pdev->irq, ioc4_intr, SA_SHIRQ,
+ if (!request_irq(idd->idd_pdev->irq, ioc4_intr, IRQF_SHARED,
"sgi-ioc4serial", soft)) {
control->ic_irq = idd->idd_pdev->irq;
} else {
diff -puN drivers/serial/jsm/jsm_driver.c~irq-flags-serial-use-the-new-irqf_-constansts drivers/serial/jsm/jsm_driver.c
--- a/drivers/serial/jsm/jsm_driver.c~irq-flags-serial-use-the-new-irqf_-constansts
+++ a/drivers/serial/jsm/jsm_driver.c
@@ -121,7 +121,7 @@ static int jsm_probe_one(struct pci_dev
}
rc = request_irq(brd->irq, brd->bd_ops->intr,
- SA_INTERRUPT|SA_SHIRQ, "JSM", brd);
+ IRQF_DISABLED|IRQF_SHARED, "JSM", brd);
if (rc) {
printk(KERN_WARNING "Failed to hook IRQ %d\n",brd->irq);
goto out_iounmap;
diff -puN drivers/serial/m32r_sio.c~irq-flags-serial-use-the-new-irqf_-constansts drivers/serial/m32r_sio.c
--- a/drivers/serial/m32r_sio.c~irq-flags-serial-use-the-new-irqf_-constansts
+++ a/drivers/serial/m32r_sio.c
@@ -542,7 +542,7 @@ static void serial_do_unlink(struct irq_
static int serial_link_irq_chain(struct uart_sio_port *up)
{
struct irq_info *i = irq_lists + up->port.irq;
- int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? SA_SHIRQ : 0;
+ int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
spin_lock_irq(&i->lock);
diff -puN drivers/serial/mcfserial.c~irq-flags-serial-use-the-new-irqf_-constansts drivers/serial/mcfserial.c
--- a/drivers/serial/mcfserial.c~irq-flags-serial-use-the-new-irqf_-constansts
+++ a/drivers/serial/mcfserial.c
@@ -1596,7 +1596,7 @@ static void mcfrs_irqinit(struct mcf_ser
/* Clear mask, so no surprise interrupts. */
uartp[MCFUART_UIMR] = 0;
- if (request_irq(info->irq, mcfrs_interrupt, SA_INTERRUPT,
+ if (request_irq(info->irq, mcfrs_interrupt, IRQF_DISABLED,
"ColdFire UART", NULL)) {
printk("MCFRS: Unable to attach ColdFire UART %d interrupt "
"vector=%d\n", info->line, info->irq);
diff -puN drivers/serial/mpc52xx_uart.c~irq-flags-serial-use-the-new-irqf_-constansts drivers/serial/mpc52xx_uart.c
--- a/drivers/serial/mpc52xx_uart.c~irq-flags-serial-use-the-new-irqf_-constansts
+++ a/drivers/serial/mpc52xx_uart.c
@@ -190,7 +190,7 @@ mpc52xx_uart_startup(struct uart_port *p
/* Request IRQ */
ret = request_irq(port->irq, mpc52xx_uart_int,
- SA_INTERRUPT | SA_SAMPLE_RANDOM, "mpc52xx_psc_uart", port);
+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM, "mpc52xx_psc_uart", port);
if (ret)
return ret;
diff -puN drivers/serial/mpsc.c~irq-flags-serial-use-the-new-irqf_-constansts drivers/serial/mpsc.c
--- a/drivers/serial/mpsc.c~irq-flags-serial-use-the-new-irqf_-constansts
+++ a/drivers/serial/mpsc.c
@@ -1412,7 +1412,7 @@ mpsc_startup(struct uart_port *port)
/* If irq's are shared, need to set flag */
if (mpsc_ports[0].port.irq == mpsc_ports[1].port.irq)
- flag = SA_SHIRQ;
+ flag = IRQF_SHARED;
if (request_irq(pi->port.irq, mpsc_sdma_intr, flag,
"mpsc-sdma", pi))
diff -puN drivers/serial/pmac_zilog.c~irq-flags-serial-use-the-new-irqf_-constansts drivers/serial/pmac_zilog.c
--- a/drivers/serial/pmac_zilog.c~irq-flags-serial-use-the-new-irqf_-constansts
+++ a/drivers/serial/pmac_zilog.c
@@ -934,7 +934,7 @@ static int pmz_startup(struct uart_port
}
pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON;
- if (request_irq(uap->port.irq, pmz_interrupt, SA_SHIRQ, "PowerMac Zilog", uap)) {
+ if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED, "PowerMac Zilog", uap)) {
dev_err(&uap->dev->ofdev.dev,
"Unable to register zs interrupt handler.\n");
pmz_set_scc_power(uap, 0);
diff -puN drivers/serial/serial_txx9.c~irq-flags-serial-use-the-new-irqf_-constansts drivers/serial/serial_txx9.c
--- a/drivers/serial/serial_txx9.c~irq-flags-serial-use-the-new-irqf_-constansts
+++ a/drivers/serial/serial_txx9.c
@@ -495,7 +495,7 @@ static int serial_txx9_startup(struct ua
sio_out(up, TXX9_SIDISR, 0);
retval = request_irq(up->port.irq, serial_txx9_interrupt,
- SA_SHIRQ, "serial_txx9", up);
+ IRQF_SHARED, "serial_txx9", up);
if (retval)
return retval;
diff -puN drivers/serial/sh-sci.c~irq-flags-serial-use-the-new-irqf_-constansts drivers/serial/sh-sci.c
--- a/drivers/serial/sh-sci.c~irq-flags-serial-use-the-new-irqf_-constansts
+++ a/drivers/serial/sh-sci.c
@@ -841,7 +841,7 @@ static int sci_request_irq(struct sci_po
printk(KERN_ERR "sci: Cannot allocate irq.(IRQ=0)\n");
return -ENODEV;
}
- if (request_irq(port->irqs[0], sci_mpxed_interrupt, SA_INTERRUPT,
+ if (request_irq(port->irqs[0], sci_mpxed_interrupt, IRQF_DISABLED,
"sci", port)) {
printk(KERN_ERR "sci: Cannot allocate irq.\n");
return -ENODEV;
@@ -850,7 +850,7 @@ static int sci_request_irq(struct sci_po
for (i = 0; i < ARRAY_SIZE(handlers); i++) {
if (!port->irqs[i])
continue;
- if (request_irq(port->irqs[i], handlers[i], SA_INTERRUPT,
+ if (request_irq(port->irqs[i], handlers[i], IRQF_DISABLED,
desc[i], port)) {
printk(KERN_ERR "sci: Cannot allocate irq.\n");
return -ENODEV;
diff -puN drivers/serial/sn_console.c~irq-flags-serial-use-the-new-irqf_-constansts drivers/serial/sn_console.c
--- a/drivers/serial/sn_console.c~irq-flags-serial-use-the-new-irqf_-constansts
+++ a/drivers/serial/sn_console.c
@@ -648,7 +648,7 @@ static irqreturn_t sn_sal_interrupt(int
static int sn_sal_connect_interrupt(struct sn_cons_port *port)
{
if (request_irq(SGI_UART_VECTOR, sn_sal_interrupt,
- SA_INTERRUPT | SA_SHIRQ,
+ IRQF_DISABLED | IRQF_SHARED,
"SAL console driver", port) >= 0) {
return SGI_UART_VECTOR;
}
diff -puN drivers/serial/sunsab.c~irq-flags-serial-use-the-new-irqf_-constansts drivers/serial/sunsab.c
--- a/drivers/serial/sunsab.c~irq-flags-serial-use-the-new-irqf_-constansts
+++ a/drivers/serial/sunsab.c
@@ -1027,7 +1027,7 @@ static int __devinit sunsab_init_one(str
int err;
err = request_irq(up->port.irq, sunsab_interrupt,
- SA_SHIRQ, "sab", up);
+ IRQF_SHARED, "sab", up);
if (err) {
of_iounmap(up->port.membase,
sizeof(union sab82532_async_regs));
diff -puN drivers/serial/sunsu.c~irq-flags-serial-use-the-new-irqf_-constansts drivers/serial/sunsu.c
--- a/drivers/serial/sunsu.c~irq-flags-serial-use-the-new-irqf_-constansts
+++ a/drivers/serial/sunsu.c
@@ -667,10 +667,10 @@ static int sunsu_startup(struct uart_por
if (up->su_type != SU_PORT_PORT) {
retval = request_irq(up->port.irq, sunsu_kbd_ms_interrupt,
- SA_SHIRQ, su_typev[up->su_type], up);
+ IRQF_SHARED, su_typev[up->su_type], up);
} else {
retval = request_irq(up->port.irq, sunsu_serial_interrupt,
- SA_SHIRQ, su_typev[up->su_type], up);
+ IRQF_SHARED, su_typev[up->su_type], up);
}
if (retval) {
printk("su: Cannot register IRQ %d\n", up->port.irq);
diff -puN drivers/serial/sunzilog.c~irq-flags-serial-use-the-new-irqf_-constansts drivers/serial/sunzilog.c
--- a/drivers/serial/sunzilog.c~irq-flags-serial-use-the-new-irqf_-constansts
+++ a/drivers/serial/sunzilog.c
@@ -1354,7 +1354,7 @@ static int __devinit zs_probe(struct of_
if (zilog_irq == -1) {
zilog_irq = op->irqs[0];
- err = request_irq(zilog_irq, sunzilog_interrupt, SA_SHIRQ,
+ err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED,
"zs", sunzilog_irq_chain);
if (err) {
of_iounmap(rp, sizeof(struct zilog_layout));
diff -puN drivers/serial/v850e_uart.c~irq-flags-serial-use-the-new-irqf_-constansts drivers/serial/v850e_uart.c
--- a/drivers/serial/v850e_uart.c~irq-flags-serial-use-the-new-irqf_-constansts
+++ a/drivers/serial/v850e_uart.c
@@ -372,13 +372,13 @@ static int v850e_uart_startup (struct ua
/* Alloc RX irq. */
err = request_irq (V850E_UART_RX_IRQ (port->line), v850e_uart_rx_irq,
- SA_INTERRUPT, "v850e_uart", port);
+ IRQF_DISABLED, "v850e_uart", port);
if (err)
return err;
/* Alloc TX irq. */
err = request_irq (V850E_UART_TX_IRQ (port->line), v850e_uart_tx_irq,
- SA_INTERRUPT, "v850e_uart", port);
+ IRQF_DISABLED, "v850e_uart", port);
if (err) {
free_irq (V850E_UART_RX_IRQ (port->line), port);
return err;
_
Patches currently in -mm which might be from tglx@xxxxxxxxxxxxx are
origin.patch
genirq-ia64-cleanup.patch
lockdep-add-disable-enable_irq_lockdep-api.patch
git-mtd.patch
genirq-convert-the-x86_64-architecture-to-irq-chips.patch
genirq-convert-the-i386-architecture-to-irq-chips.patch
genirq-irq-convert-the-move_irq-flag-from-a-32bit-word-to-a-single-bit.patch
genirq-irq-add-moved_masked_irq.patch
genirq-x86_64-irq-reenable-migrating-irqs-to-other-cpus.patch
genirq-msi-simplify-msi-enable-and-disable.patch
genirq-msi-make-the-msi-boolean-tests-return-either-0-or-1.patch
genirq-msi-implement-helper-functions-read_msi_msg-and-write_msi_msg.patch
genirq-msi-refactor-the-msi_ops.patch
genirq-msi-simplify-the-msi-irq-limit-policy.patch
genirq-irq-add-a-dynamic-irq-creation-api.patch
genirq-ia64-irq-dynamic-irq-support.patch
genirq-i386-irq-dynamic-irq-support.patch
genirq-x86_64-irq-dynamic-irq-support.patch
genirq-msi-make-the-msi-code-irq-based-and-not-vector-based.patch
genirq-x86_64-irq-move-msi-message-composition-into-io_apicc.patch
genirq-i386-irq-move-msi-message-composition-into-io_apicc.patch
genirq-msi-only-build-msi-apicc-on-ia64.patch
genirq-x86_64-irq-remove-the-msi-assumption-that-irq-==-vector.patch
genirq-i386-irq-remove-the-msi-assumption-that-irq-==-vector.patch
genirq-irq-remove-msi-hacks.patch
genirq-irq-generalize-the-check-for-hardirq_bits.patch
genirq-x86_64-irq-make-the-external-irq-handlers-report-their-vector-not-the-irq-number.patch
genirq-x86_64-irq-make-vector_irq-per-cpu.patch
genirq-x86_64-irq-kill-gsi_irq_sharing.patch
genirq-x86_64-irq-kill-irq-compression.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
