The patch titled
irq-flags: consolidate flags for request_irq
has been removed from the -mm tree. Its filename is
irq-flags-consolidate-flags-for-request_irq.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: irq-flags: consolidate flags for request_irq
From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
The recent interrupt rework introduced bit value conflicts with sparc.
Instead of introducing new architecture flags mess, move the interrupt SA_
flags out of the signal namespace and replace them by interrupt related flags.
This allows to remove the obsolete SA_INTERRUPT flag and clean up the bit
field values.
This patch:
Move the interrupt related SA_ flags out of linux/signal.h and rename them to
IRQF_ . This moves the interrupt related flags out of the signal namespace
and allows to remove the architecture dependencies.
SA_INTERRUPT is not needed by userspace and glibc so it can be removed safely.
The existing SA_ constants are kept for easy transition and will be removed
after a 6 month grace period.
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Ingo Molnar <mingo@xxxxxxx>
Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
Cc: "Randy.Dunlap" <rdunlap@xxxxxxxxxxxx>
Cc: Jaroslav Kysela <perex@xxxxxxx>
Cc: Takashi Iwai <tiwai@xxxxxxx>
Cc: "Antonino A. Daplas" <adaplas@xxxxxxx>
Cc: Greg KH <greg@xxxxxxxxx>
Cc: Russell King <rmk@xxxxxxxxxxxxxxxx>
Cc: James Bottomley <James.Bottomley@xxxxxxxxxxxx>
Cc: Kyle McMartin <kyle@xxxxxxxxxxx>
Cc: Jeff Garzik <jeff@xxxxxxxxxx>
Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
Cc: Karsten Keil <kkeil@xxxxxxx>
Cc: Jody McIntyre <scjody@xxxxxxxxxxxxxx>
Cc: Ben Collins <bcollins@xxxxxxxxxx>
Cc: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
Cc: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@xxxxxxxxxxxxxx>
Cc: Dave Airlie <airlied@xxxxxxxx>
Cc: Jens Axboe <axboe@xxxxxxx>
Cc: Chris Zankel <chris@xxxxxxxxxx>
Cc: Andi Kleen <ak@xxxxxx>
Cc: Miles Bader <uclinux-v850@xxxxxxxxxxxxx>
Cc: Jeff Dike <jdike@xxxxxxxxxxx>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@xxxxxxxx>
Cc: Paul Mundt <lethal@xxxxxxxxxxxx>
Cc: Kazumoto Kojima <kkojima@xxxxxxxxxxxxxx>
Cc: Martin Schwidefsky <schwidefsky@xxxxxxxxxx> Cc: Heiko Carstens <heiko.carstens@xxxxxxxxxx>
Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Cc: Roman Zippel <zippel@xxxxxxxxxxxxxx>
Cc: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Cc: Greg Ungerer <gerg@xxxxxxxxxxx>
Cc: "Luck, Tony" <tony.luck@xxxxxxxxx>
Cc: Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx>
Cc: David Howells <dhowells@xxxxxxxxxx>
Cc: Mikael Starvik <starvik@xxxxxxxx>
Cc: Russell King <rmk@xxxxxxxxxxxxxxxx>
Cc: Ivan Kokshaysky <ink@xxxxxxxxxxxxxxxxxxxx>
Cc: Richard Henderson <rth@xxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
Documentation/feature-removal-schedule.txt | 9 +++
include/linux/interrupt.h | 47 ++++++++++++++++
include/linux/irq.h | 55 +++++++++----------
include/linux/signal.h | 26 --------
4 files changed, 83 insertions(+), 54 deletions(-)
diff -puN Documentation/feature-removal-schedule.txt~irq-flags-consolidate-flags-for-request_irq Documentation/feature-removal-schedule.txt
--- a/Documentation/feature-removal-schedule.txt~irq-flags-consolidate-flags-for-request_irq
+++ a/Documentation/feature-removal-schedule.txt
@@ -257,3 +257,12 @@ Why: Code does no longer build since at
Who: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
---------------------------
+
+What: Interrupt only SA_* flags
+When: Januar 2007
+Why: The interrupt related SA_* flags are replaced by IRQF_* to move them
+ out of the signal namespace.
+
+Who: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
+
+---------------------------
diff -puN include/linux/interrupt.h~irq-flags-consolidate-flags-for-request_irq include/linux/interrupt.h
--- a/include/linux/interrupt.h~irq-flags-consolidate-flags-for-request_irq
+++ a/include/linux/interrupt.h
@@ -14,6 +14,53 @@
#include <asm/ptrace.h>
#include <asm/system.h>
+/*
+ * These correspond to the IORESOURCE_IRQ_* defines in
+ * linux/ioport.h to select the interrupt line behaviour. When
+ * requesting an interrupt without specifying a IRQF_TRIGGER, the
+ * setting should be assumed to be "as already configured", which
+ * may be as per machine or firmware initialisation.
+ */
+#define IRQF_TRIGGER_NONE 0x00000000
+#define IRQF_TRIGGER_RISING 0x00000001
+#define IRQF_TRIGGER_FALLING 0x00000002
+#define IRQF_TRIGGER_HIGH 0x00000004
+#define IRQF_TRIGGER_LOW 0x00000008
+#define IRQF_TRIGGER_MASK (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
+#define IRQF_TRIGGER_PROBE 0x00000010
+
+/*
+ * These flags used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * IRQF_DISABLED - keep irqs disabled when calling the action handler
+ * IRQF_SAMPLE_RANDOM - irq is used to feed the random generator
+ * IRQF_SHARED - allow sharing the irq among several devices
+ * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur
+ * IRQF_TIMER - Flag to mark this interrupt as timer interrupt
+ */
+#define IRQF_DISABLED 0x00000020
+#define IRQF_SAMPLE_RANDOM 0x00000040
+#define IRQF_SHARED 0x00000080
+#define IRQF_PROBE_SHARED 0x00000100
+#define IRQF_TIMER 0x00000200
+
+/*
+ * Migration helpers. Scheduled for removal in 1/2007
+ * Do not use for new code !
+ */
+#define SA_INTERRUPT IRQF_DISABLED
+#define SA_SAMPLE_RANDOM IRQF_SAMPLE_RANDOM
+#define SA_SHIRQ IRQF_SHARED
+#define SA_PROBEIRQ IRQF_PROBE_SHARED
+
+#define SA_TRIGGER_LOW IRQF_TRIGGER_LOW
+#define SA_TRIGGER_HIGH IRQF_TRIGGER_HIGH
+#define SA_TRIGGER_FALLING IRQF_TRIGGER_FALLING
+#define SA_TRIGGER_RISING IRQF_TRIGGER_RISING
+#define SA_TRIGGER_MASK IRQF_TRIGGER_MASK
+
struct irqaction {
irqreturn_t (*handler)(int, void *, struct pt_regs *);
unsigned long flags;
diff -puN include/linux/irq.h~irq-flags-consolidate-flags-for-request_irq include/linux/irq.h
--- a/include/linux/irq.h~irq-flags-consolidate-flags-for-request_irq
+++ a/include/linux/irq.h
@@ -24,41 +24,40 @@
/*
* IRQ line status.
+ *
+ * Bits 0-16 are reserved for the IRQF_* bits in linux/interrupt.h
+ *
+ * IRQ types
*/
-#define IRQ_INPROGRESS 1 /* IRQ handler active - do not enter! */
-#define IRQ_DISABLED 2 /* IRQ disabled - do not enter! */
-#define IRQ_PENDING 4 /* IRQ pending - replay on enable */
-#define IRQ_REPLAY 8 /* IRQ has been replayed but not acked yet */
-#define IRQ_AUTODETECT 16 /* IRQ is being autodetected */
-#define IRQ_WAITING 32 /* IRQ not yet seen - for autodetection */
-#define IRQ_LEVEL 64 /* IRQ level triggered */
-#define IRQ_MASKED 128 /* IRQ masked - shouldn't be seen again */
+#define IRQ_TYPE_NONE 0x00000000 /* Default, unspecified type */
+#define IRQ_TYPE_EDGE_RISING 0x00000001 /* Edge rising type */
+#define IRQ_TYPE_EDGE_FALLING 0x00000002 /* Edge falling type */
+#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)
+#define IRQ_TYPE_LEVEL_HIGH 0x00000004 /* Level high type */
+#define IRQ_TYPE_LEVEL_LOW 0x00000008 /* Level low type */
+#define IRQ_TYPE_SENSE_MASK 0x0000000f /* Mask of the above */
+#define IRQ_TYPE_PROBE 0x00000010 /* Probing in progress */
+
+/* Internal flags */
+#define IRQ_INPROGRESS 0x00010000 /* IRQ handler active - do not enter! */
+#define IRQ_DISABLED 0x00020000 /* IRQ disabled - do not enter! */
+#define IRQ_PENDING 0x00040000 /* IRQ pending - replay on enable */
+#define IRQ_REPLAY 0x00080000 /* IRQ has been replayed but not acked yet */
+#define IRQ_AUTODETECT 0x00100000 /* IRQ is being autodetected */
+#define IRQ_WAITING 0x00200000 /* IRQ not yet seen - for autodetection */
+#define IRQ_LEVEL 0x00400000 /* IRQ level triggered */
+#define IRQ_MASKED 0x00800000 /* IRQ masked - shouldn't be seen again */
#ifdef CONFIG_IRQ_PER_CPU
-# define IRQ_PER_CPU 256 /* IRQ is per CPU */
+# define IRQ_PER_CPU 0x01000000 /* IRQ is per CPU */
# define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU)
#else
# define CHECK_IRQ_PER_CPU(var) 0
#endif
-#define IRQ_NOPROBE 512 /* IRQ is not valid for probing */
-#define IRQ_NOREQUEST 1024 /* IRQ cannot be requested */
-#define IRQ_NOAUTOEN 2048 /* IRQ will not be enabled on request irq */
-#define IRQ_DELAYED_DISABLE \
- 4096 /* IRQ disable (masking) happens delayed. */
-
-/*
- * IRQ types, see also include/linux/interrupt.h
- */
-#define IRQ_TYPE_NONE 0x0000 /* Default, unspecified type */
-#define IRQ_TYPE_EDGE_RISING 0x0001 /* Edge rising type */
-#define IRQ_TYPE_EDGE_FALLING 0x0002 /* Edge falling type */
-#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)
-#define IRQ_TYPE_LEVEL_HIGH 0x0004 /* Level high type */
-#define IRQ_TYPE_LEVEL_LOW 0x0008 /* Level low type */
-#define IRQ_TYPE_SENSE_MASK 0x000f /* Mask of the above */
-#define IRQ_TYPE_SIMPLE 0x0010 /* Simple type */
-#define IRQ_TYPE_PERCPU 0x0020 /* Per CPU type */
-#define IRQ_TYPE_PROBE 0x0040 /* Probing in progress */
+#define IRQ_NOPROBE 0x02000000 /* IRQ is not valid for probing */
+#define IRQ_NOREQUEST 0x04000000 /* IRQ cannot be requested */
+#define IRQ_NOAUTOEN 0x08000000 /* IRQ will not be enabled on request irq */
+#define IRQ_DELAYED_DISABLE 0x10000000 /* IRQ disable (masking) happens delayed. */
struct proc_dir_entry;
diff -puN include/linux/signal.h~irq-flags-consolidate-flags-for-request_irq include/linux/signal.h
--- a/include/linux/signal.h~irq-flags-consolidate-flags-for-request_irq
+++ a/include/linux/signal.h
@@ -9,32 +9,6 @@
#include <linux/spinlock.h>
/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- * SA_PROBEIRQ is set by callers when they expect sharing mismatches to occur
- */
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#define SA_PROBEIRQ 0x08000000
-
-/*
- * As above, these correspond to the IORESOURCE_IRQ_* defines in
- * linux/ioport.h to select the interrupt line behaviour. When
- * requesting an interrupt without specifying a SA_TRIGGER, the
- * setting should be assumed to be "as already configured", which
- * may be as per machine or firmware initialisation.
- */
-#define SA_TRIGGER_LOW 0x00000008
-#define SA_TRIGGER_HIGH 0x00000004
-#define SA_TRIGGER_FALLING 0x00000002
-#define SA_TRIGGER_RISING 0x00000001
-#define SA_TRIGGER_MASK (SA_TRIGGER_HIGH|SA_TRIGGER_LOW|\
- SA_TRIGGER_RISING|SA_TRIGGER_FALLING)
-
-/*
* Real Time signals may be queued.
*/
_
Patches currently in -mm which might be from tglx@xxxxxxxxxxxxx are
origin.patch
genirq-ia64-cleanup.patch
lockdep-add-disable-enable_irq_lockdep-api.patch
git-mtd.patch
genirq-convert-the-x86_64-architecture-to-irq-chips.patch
genirq-convert-the-i386-architecture-to-irq-chips.patch
genirq-irq-convert-the-move_irq-flag-from-a-32bit-word-to-a-single-bit.patch
genirq-irq-add-moved_masked_irq.patch
genirq-x86_64-irq-reenable-migrating-irqs-to-other-cpus.patch
genirq-msi-simplify-msi-enable-and-disable.patch
genirq-msi-make-the-msi-boolean-tests-return-either-0-or-1.patch
genirq-msi-implement-helper-functions-read_msi_msg-and-write_msi_msg.patch
genirq-msi-refactor-the-msi_ops.patch
genirq-msi-simplify-the-msi-irq-limit-policy.patch
genirq-irq-add-a-dynamic-irq-creation-api.patch
genirq-ia64-irq-dynamic-irq-support.patch
genirq-i386-irq-dynamic-irq-support.patch
genirq-x86_64-irq-dynamic-irq-support.patch
genirq-msi-make-the-msi-code-irq-based-and-not-vector-based.patch
genirq-x86_64-irq-move-msi-message-composition-into-io_apicc.patch
genirq-i386-irq-move-msi-message-composition-into-io_apicc.patch
genirq-msi-only-build-msi-apicc-on-ia64.patch
genirq-x86_64-irq-remove-the-msi-assumption-that-irq-==-vector.patch
genirq-i386-irq-remove-the-msi-assumption-that-irq-==-vector.patch
genirq-irq-remove-msi-hacks.patch
genirq-irq-generalize-the-check-for-hardirq_bits.patch
genirq-x86_64-irq-make-the-external-irq-handlers-report-their-vector-not-the-irq-number.patch
genirq-x86_64-irq-make-vector_irq-per-cpu.patch
genirq-x86_64-irq-kill-gsi_irq_sharing.patch
genirq-x86_64-irq-kill-irq-compression.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
