The patch titled
bcm43xx: workaround init_board vs. IRQ race
has been added to the -mm tree. Its filename is
bcm43xx-workaround-init_board-vs-irq-race.patch
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: bcm43xx: workaround init_board vs. IRQ race
From: Michael Buesch <mb@xxxxxxxxx>
Place the Init-vs-IRQ workaround before any card register access, because
we might not have the wireless core mapped at all times in init. So this
will result in a Machine Check caused by a bus error.
Signed-off-by: Michael Buesch <mb@xxxxxxxxx>
Cc: "John W. Linville" <linville@xxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
drivers/net/wireless/bcm43xx/bcm43xx_main.c | 28 +++++++++---------
1 file changed, 14 insertions(+), 14 deletions(-)
diff -puN drivers/net/wireless/bcm43xx/bcm43xx_main.c~bcm43xx-workaround-init_board-vs-irq-race drivers/net/wireless/bcm43xx/bcm43xx_main.c
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c~bcm43xx-workaround-init_board-vs-irq-race
+++ a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -1872,6 +1872,15 @@ static irqreturn_t bcm43xx_interrupt_han
spin_lock(&bcm->_lock);
+ /* Only accept IRQs, if we are initialized properly.
+ * This avoids an RX race while initializing.
+ * We should probably not enable IRQs before we are initialized
+ * completely, but some careful work is needed to fix this. I think it
+ * is best to stay with this cheap workaround for now... .
+ */
+ if (unlikely(!bcm->initialized))
+ goto out;
+
reason = bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON);
if (reason == 0xffffffff) {
/* irq not for us (shared irq) */
@@ -1893,20 +1902,11 @@ static irqreturn_t bcm43xx_interrupt_han
bcm43xx_interrupt_ack(bcm, reason);
- /* Only accept IRQs, if we are initialized properly.
- * This avoids an RX race while initializing.
- * We should probably not enable IRQs before we are initialized
- * completely, but some careful work is needed to fix this. I think it
- * is best to stay with this cheap workaround for now... .
- */
- if (likely(bcm->initialized)) {
- /* disable all IRQs. They are enabled again in the bottom half. */
- bcm->irq_savedstate = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL);
- /* save the reason code and call our bottom half. */
- bcm->irq_reason = reason;
- tasklet_schedule(&bcm->isr_tasklet);
- }
-
+ /* disable all IRQs. They are enabled again in the bottom half. */
+ bcm->irq_savedstate = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL);
+ /* save the reason code and call our bottom half. */
+ bcm->irq_reason = reason;
+ tasklet_schedule(&bcm->isr_tasklet);
out:
mmiowb();
spin_unlock(&bcm->_lock);
_
Patches currently in -mm which might be from mb@xxxxxxxxx are
git-netdev-all.patch
bcm43xx-workaround-init_board-vs-irq-race.patch
remove-old-hw-rng-support.patch
add-new-generic-hw-rng-core.patch
add-new-generic-hw-rng-core-cleanups.patch
add-new-generic-hw-rng-core-hw_random-core-rewrite-chrdev-read-method.patch
add-new-generic-hw-rng-core-maintainers.patch
add-new-generic-hw-rng-core-hw_random-core-rewrite-chrdev-read-method-hw_random-core-block-read-if-o_nonblock.patch
add-intel-hw-rng-driver.patch
add-intel-hw-rng-driver-cleanups.patch
add-amd-hw-rng-driver.patch
add-geode-hw-rng-driver.patch
add-geode-hw-rng-driver-cleanups.patch
add-via-hw-rng-driver.patch
add-via-hw-rng-driver-cleanups.patch
add-ixp4xx-hw-rng-driver.patch
add-ti-omap-cpu-family-hw-rng-driver.patch
add-bcm43xx-hw-rng-support.patch
capi-crash--race-condition.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
