The patch titled
chardev: GPIO for SCx200 & PC-8736x: use dev_dbg in common module
has been added to the -mm tree. Its filename is
chardev-gpio-for-scx200-pc-8736x-use-dev_dbg.patch
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: chardev: GPIO for SCx200 & PC-8736x: use dev_dbg in common module
From: Jim Cromie <jim.cromie@xxxxxxxxx>
Use of dev_dbg() and friends is considered good practice. dev_dbg() needs a
struct device *devp, but nsc_gpio is only a helper module, so it doesnt
have/need its own. To provide devp to the user-modules (scx200 & pc8736x
_gpio), we add it to the vtable, and set it during init.
Also squeeze nsc_gpio_dump()'s format a little.
[ 199.259879] pc8736x_gpio.0: io09: 0x0044 TS OD PUE EDGE LO DEBOUNCE
Signed-off-by: Jim Cromie <jim.cromie@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
drivers/char/nsc_gpio.c | 45 ++++++++++++++++++----------------
drivers/char/pc8736x_gpio.c | 3 +-
drivers/char/scx200_gpio.c | 11 ++------
include/linux/nsc_gpio.h | 6 +++-
4 files changed, 35 insertions(+), 30 deletions(-)
diff -puN drivers/char/nsc_gpio.c~chardev-gpio-for-scx200-pc-8736x-use-dev_dbg drivers/char/nsc_gpio.c
--- a/drivers/char/nsc_gpio.c~chardev-gpio-for-scx200-pc-8736x-use-dev_dbg
+++ a/drivers/char/nsc_gpio.c
@@ -14,22 +14,27 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/nsc_gpio.h>
+#include <linux/platform_device.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#define NAME "nsc_gpio"
-void nsc_gpio_dump(unsigned index, u32 config)
+void nsc_gpio_dump(struct nsc_gpio_ops *amp, unsigned index)
{
- printk(KERN_INFO NAME ": GPIO-%02u: 0x%08lx %s %s %s %s %s %s %s\n",
- index, (unsigned long)config,
- (config & 1) ? "OE" : "TS", /* output-enabled/tristate */
- (config & 2) ? "PP" : "OD", /* push pull / open drain */
- (config & 4) ? "PUE" : "PUD", /* pull up enabled/disabled */
- (config & 8) ? "LOCKED" : "", /* locked / unlocked */
- (config & 16) ? "LEVEL" : "EDGE",/* level/edge input */
- (config & 32) ? "HI" : "LO", /* trigger on rise/fall edge */
- (config & 64) ? "DEBOUNCE" : ""); /* debounce */
+ /* retrieve current config w/o changing it */
+ u32 config = amp->gpio_config(index, ~0, 0);
+
+ /* user requested via 'v' command, so its INFO */
+ dev_info(amp->dev, "io%02u: 0x%04x %s %s %s %s %s %s %s\n",
+ index, config,
+ (config & 1) ? "OE" : "TS", /* output-enabled/tristate */
+ (config & 2) ? "PP" : "OD", /* push pull / open drain */
+ (config & 4) ? "PUE" : "PUD", /* pull up enabled/disabled */
+ (config & 8) ? "LOCKED" : "", /* locked / unlocked */
+ (config & 16) ? "LEVEL" : "EDGE",/* level/edge input */
+ (config & 32) ? "HI" : "LO", /* trigger on rise/fall edge */
+ (config & 64) ? "DEBOUNCE" : ""); /* debounce */
}
ssize_t nsc_gpio_write(struct file *file, const char __user *data,
@@ -37,6 +42,7 @@ ssize_t nsc_gpio_write(struct file *file
{
unsigned m = iminor(file->f_dentry->d_inode);
struct nsc_gpio_ops *amp = file->private_data;
+ struct device *dev = amp->dev;
size_t i;
int err = 0;
@@ -52,42 +58,41 @@ ssize_t nsc_gpio_write(struct file *file
amp->gpio_set(m, 1);
break;
case 'O':
- printk(KERN_INFO NAME ": GPIO%d output enabled\n", m);
+ dev_dbg(dev, "GPIO%d output enabled\n", m);
amp->gpio_config(m, ~1, 1);
break;
case 'o':
- printk(KERN_INFO NAME ": GPIO%d output disabled\n", m);
+ dev_dbg(dev, "GPIO%d output disabled\n", m);
amp->gpio_config(m, ~1, 0);
break;
case 'T':
- printk(KERN_INFO NAME ": GPIO%d output is push pull\n",
+ dev_dbg(dev, "GPIO%d output is push pull\n",
m);
amp->gpio_config(m, ~2, 2);
break;
case 't':
- printk(KERN_INFO NAME ": GPIO%d output is open drain\n",
+ dev_dbg(dev, "GPIO%d output is open drain\n",
m);
amp->gpio_config(m, ~2, 0);
break;
case 'P':
- printk(KERN_INFO NAME ": GPIO%d pull up enabled\n", m);
+ dev_dbg(dev, "GPIO%d pull up enabled\n", m);
amp->gpio_config(m, ~4, 4);
break;
case 'p':
- printk(KERN_INFO NAME ": GPIO%d pull up disabled\n", m);
+ dev_dbg(dev, "GPIO%d pull up disabled\n", m);
amp->gpio_config(m, ~4, 0);
break;
case 'v':
/* View Current pin settings */
- amp->gpio_dump(m);
+ amp->gpio_dump(amp, m);
break;
case '\n':
/* end of settings string, do nothing */
break;
default:
- printk(KERN_ERR NAME
- ": GPIO-%2d bad setting: chr<0x%2x>\n", m,
- (int)c);
+ dev_err(dev, "io%2d bad setting: chr<0x%2x>\n",
+ m, (int)c);
err++;
}
}
diff -puN drivers/char/pc8736x_gpio.c~chardev-gpio-for-scx200-pc-8736x-use-dev_dbg drivers/char/pc8736x_gpio.c
--- a/drivers/char/pc8736x_gpio.c~chardev-gpio-for-scx200-pc-8736x-use-dev_dbg
+++ a/drivers/char/pc8736x_gpio.c
@@ -207,7 +207,7 @@ static void pc8736x_gpio_change(unsigned
pc8736x_gpio_set(index, !pc8736x_gpio_get(index));
}
-extern void nsc_gpio_dump(unsigned iminor);
+extern void nsc_gpio_dump(struct nsc_gpio_ops *amp, unsigned iminor);
static struct nsc_gpio_ops pc8736x_access = {
.owner = THIS_MODULE,
@@ -260,6 +260,7 @@ static int __init pc8736x_gpio_init(void
platform_device_put(pdev);
return -ENODEV;
}
+ pc8736x_access.dev = &pdev->dev;
/* Verify that chip and it's GPIO unit are both enabled.
My BIOS does this, so I take minimum action here
diff -puN drivers/char/scx200_gpio.c~chardev-gpio-for-scx200-pc-8736x-use-dev_dbg drivers/char/scx200_gpio.c
--- a/drivers/char/scx200_gpio.c~chardev-gpio-for-scx200-pc-8736x-use-dev_dbg
+++ a/drivers/char/scx200_gpio.c
@@ -35,14 +35,6 @@ static int major = 0; /* default to dyn
module_param(major, int, 0);
MODULE_PARM_DESC(major, "Major device number");
-extern void nsc_gpio_dump(unsigned index);
-
-extern ssize_t nsc_gpio_write(struct file *file, const char __user *data,
- size_t len, loff_t *ppos);
-
-extern ssize_t nsc_gpio_read(struct file *file, char __user *buf,
- size_t len, loff_t *ppos);
-
struct nsc_gpio_ops scx200_access = {
.owner = THIS_MODULE,
.gpio_config = scx200_gpio_configure,
@@ -101,6 +93,9 @@ static int __init scx200_gpio_init(void)
if (rc)
goto undo_platform_device_add;
+ /* nsc_gpio uses dev_dbg(), so needs this */
+ scx200_access.dev = &pdev->dev;
+
if (major)
rc = register_chrdev_region(dev, num_devs, "scx200_gpio");
else {
diff -puN include/linux/nsc_gpio.h~chardev-gpio-for-scx200-pc-8736x-use-dev_dbg include/linux/nsc_gpio.h
--- a/include/linux/nsc_gpio.h~chardev-gpio-for-scx200-pc-8736x-use-dev_dbg
+++ a/include/linux/nsc_gpio.h
@@ -22,13 +22,14 @@
struct nsc_gpio_ops {
struct module* owner;
u32 (*gpio_config) (unsigned iminor, u32 mask, u32 bits);
- void (*gpio_dump) (unsigned iminor);
+ void (*gpio_dump) (struct nsc_gpio_ops *amp, unsigned iminor);
int (*gpio_get) (unsigned iminor);
void (*gpio_set) (unsigned iminor, int state);
void (*gpio_set_high)(unsigned iminor);
void (*gpio_set_low) (unsigned iminor);
void (*gpio_change) (unsigned iminor);
int (*gpio_current) (unsigned iminor);
+ struct device* dev; /* for dev_dbg() support, set in init */
};
extern ssize_t nsc_gpio_write(struct file *file, const char __user *data,
@@ -36,3 +37,6 @@ extern ssize_t nsc_gpio_write(struct fil
extern ssize_t nsc_gpio_read(struct file *file, char __user *buf,
size_t len, loff_t *ppos);
+
+extern void nsc_gpio_dump(struct nsc_gpio_ops *amp, unsigned index);
+
_
Patches currently in -mm which might be from jim.cromie@xxxxxxxxx are
chardev-gpio-for-scx200-pc-8736x-whitespace.patch
chardev-gpio-for-scx200-pc-8736x-modernize.patch
chardev-gpio-for-scx200-pc-8736x-add-platforn_device.patch
chardev-gpio-for-scx200-pc-8736x-device-minor.patch
chardev-gpio-for-scx200-pc-8736x-put-gpio_dump.patch
chardev-gpio-for-scx200-pc-8736x-add-v-command.patch
chardev-gpio-for-scx200-pc-8736x-refactor-scx200_probe.patch
chardev-gpio-for-scx200-pc-8736x-add-gpio-ops.patch
chardev-gpio-for-scx200-pc-8736x-dispatch.patch
chardev-gpio-for-scx200-pc-8736x-add-empty.patch
chardev-gpio-for-scx200-pc-8736x-migrate-file-ops.patch
chardev-gpio-for-scx200-pc-8736x-migrate-gpio_dump.patch
chardev-gpio-for-scx200-pc-8736x-add-new-pc8736x_gpio.patch
chardev-gpio-for-scx200-pc-8736x-add-platform_device.patch
chardev-gpio-for-scx200-pc-8736x-use-dev_dbg.patch
chardev-gpio-for-scx200-pc-8736x-fix-gpio_current.patch
chardev-gpio-for-scx200-pc-8736x-replace-spinlocks.patch
chardev-gpio-for-scx200-pc-8736x-display-pin.patch
chardev-gpio-for-scx200-pc-8736x-add-proper.patch
chardev-gpio-for-scx200-pc-8736x-add-sysfs-gpio.patch
generic-time-add-macro-to-simplify-hide-mask.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
