The patch titled
chardev: GPIO for SCx200 & PC-8736x: add platform_device for use w dev_dbg
has been added to the -mm tree. Its filename is
chardev-gpio-for-scx200-pc-8736x-add-platform_device.patch
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: chardev: GPIO for SCx200 & PC-8736x: add platform_device for use w dev_dbg
From: Jim Cromie <jim.cromie@xxxxxxxxx>
Adds platform-device to (just introduced) driver, and uses it to replace many
printks with dev_dbg() etc. This could trivially be merged into previous
patch, but this way matches better with the corresponding patch that does the
same change to scx200_gpio.
Signed-off-by: Jim Cromie <jim.cromie@xxxxxxxxx>
Cc: Greg KH <greg@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
drivers/char/pc8736x_gpio.c | 76 ++++++++++++++++++++--------------
1 file changed, 45 insertions(+), 31 deletions(-)
diff -puN drivers/char/pc8736x_gpio.c~chardev-gpio-for-scx200-pc-8736x-add-platform_device drivers/char/pc8736x_gpio.c
--- a/drivers/char/pc8736x_gpio.c~chardev-gpio-for-scx200-pc-8736x-add-platform_device
+++ a/drivers/char/pc8736x_gpio.c
@@ -17,13 +17,14 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/nsc_gpio.h>
+#include <linux/platform_device.h>
#include <asm/uaccess.h>
#include <asm/io.h>
-#define NAME "pc8736x_gpio"
+#define DEVNAME "pc8736x_gpio"
MODULE_AUTHOR("Jim Cromie <jim.cromie@xxxxxxxxx>");
-MODULE_DESCRIPTION("NatSemi SCx200 GPIO Pin Driver");
+MODULE_DESCRIPTION("NatSemi PC-8736x GPIO Pin Driver");
MODULE_LICENSE("GPL");
static int major = 0; /* default to dynamic major */
@@ -42,6 +43,8 @@ static unsigned pc8736x_gpio_base;
#define SIO_CF1 0x21 /* chip config, bit0 is chip enable */
+#define PC8736X_GPIO_SIZE 16
+
#define SIO_UNIT_SEL 0x7 /* unit select reg */
#define SIO_UNIT_ACT 0x30 /* unit enable */
#define SIO_GPIO_UNIT 0x7 /* unit number of GPIO */
@@ -69,6 +72,8 @@ static int port_offset[] = { 0, 4, 8, 10
#define PORT_EVT_EN 2
#define PORT_EVT_STST 3
+static struct platform_device *pdev; /* use in dev_*() */
+
static inline void superio_outb(int addr, int val)
{
outb_p(addr, superio_cmd);
@@ -148,9 +153,9 @@ static int pc8736x_gpio_get(unsigned min
val >>= bit;
val &= 1;
- printk(KERN_INFO NAME ": _gpio_get(%d from %x bit %d) == val %d\n",
- minor, pc8736x_gpio_base + port_offset[port] + PORT_IN, bit,
- val);
+ dev_dbg(&pdev->dev, "_gpio_get(%d from %x bit %d) == val %d\n",
+ minor, pc8736x_gpio_base + port_offset[port] + PORT_IN, bit,
+ val);
return val;
}
@@ -164,22 +169,21 @@ static void pc8736x_gpio_set(unsigned mi
bit = minor & 7;
curval = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_OUT);
- printk(KERN_INFO NAME
- ": addr:%x cur:%x bit-pos:%d cur-bit:%x + new:%d -> bit-new:%d\n",
- pc8736x_gpio_base + port_offset[port] + PORT_OUT,
- curval, bit, (curval & ~(1 << bit)), val, (val << bit));
+ dev_dbg(&pdev->dev, "addr:%x cur:%x bit-pos:%d cur-bit:%x + new:%d -> bit-new:%d\n",
+ pc8736x_gpio_base + port_offset[port] + PORT_OUT,
+ curval, bit, (curval & ~(1 << bit)), val, (val << bit));
val = (curval & ~(1 << bit)) | (val << bit);
- printk(KERN_INFO NAME ": gpio_set(minor:%d port:%d bit:%d"
- ") %2x -> %2x\n", minor, port, bit, curval, val);
+ dev_dbg(&pdev->dev, "gpio_set(minor:%d port:%d bit:%d)"
+ " %2x -> %2x\n", minor, port, bit, curval, val);
outb_p(val, pc8736x_gpio_base + port_offset[port] + PORT_OUT);
curval = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_OUT);
val = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_IN);
- printk(KERN_INFO NAME ": wrote %x, read: %x\n", curval, val);
+ dev_dbg(&pdev->dev, "wrote %x, read: %x\n", curval, val);
}
static void pc8736x_gpio_set_high(unsigned index)
@@ -194,7 +198,7 @@ static void pc8736x_gpio_set_low(unsigne
static int pc8736x_gpio_current(unsigned index)
{
- printk(KERN_WARNING NAME ": pc8736x_gpio_current unimplemented\n");
+ dev_warn(&pdev->dev, "pc8736x_gpio_current unimplemented\n");
return 0;
}
@@ -222,7 +226,7 @@ static int pc8736x_gpio_open(struct inod
unsigned m = iminor(inode);
file->private_data = &pc8736x_access;
- printk(KERN_NOTICE NAME " open %d\n", m);
+ dev_dbg(&pdev->dev, "open %d\n", m);
if (m > 63)
return -EINVAL;
@@ -230,20 +234,30 @@ static int pc8736x_gpio_open(struct inod
}
static struct file_operations pc8736x_gpio_fops = {
- .owner = THIS_MODULE,
- .open = pc8736x_gpio_open,
- .write = nsc_gpio_write,
- .read = nsc_gpio_read,
+ .owner = THIS_MODULE,
+ .open = pc8736x_gpio_open,
+ .write = nsc_gpio_write,
+ .read = nsc_gpio_read,
};
static int __init pc8736x_gpio_init(void)
{
int r, rc;
- printk(KERN_DEBUG NAME " initializing\n");
+ pdev = platform_device_alloc(DEVNAME, 0);
+ if (!pdev)
+ return -ENOMEM;
+
+ rc = platform_device_add(pdev);
+ if (rc) {
+ platform_device_put(pdev);
+ return -ENODEV;
+ }
+ dev_info(&pdev->dev, "NatSemi pc8736x GPIO Driver Initializing\n");
if (!pc8736x_superio_present()) {
- printk(KERN_ERR NAME ": no device found\n");
+ dev_err(&pdev->dev, "no device found\n");
+ platform_device_put(pdev);
return -ENODEV;
}
@@ -252,31 +266,31 @@ static int __init pc8736x_gpio_init(void
*/
rc = superio_inb(SIO_CF1);
if (!(rc & 0x01)) {
- printk(KERN_ERR NAME ": device not enabled\n");
+ dev_err(&pdev->dev, "device not enabled\n");
return -ENODEV;
}
device_select(SIO_GPIO_UNIT);
if (!superio_inb(SIO_UNIT_ACT)) {
- printk(KERN_ERR NAME ": GPIO unit not enabled\n");
+ dev_err(&pdev->dev, "GPIO unit not enabled\n");
return -ENODEV;
}
- /* read GPIO unit base address */
+ /* read the GPIO unit base addr that chip responds to */
pc8736x_gpio_base = (superio_inb(SIO_BASE_HADDR) << 8
| superio_inb(SIO_BASE_LADDR));
- if (request_region(pc8736x_gpio_base, 16, NAME))
- printk(KERN_INFO NAME ": GPIO ioport %x reserved\n",
- pc8736x_gpio_base);
+ if (request_region(pc8736x_gpio_base, 16, DEVNAME))
+ dev_info(&pdev->dev, "GPIO ioport %x reserved\n",
+ pc8736x_gpio_base);
- r = register_chrdev(major, NAME, &pc8736x_gpio_fops);
+ r = register_chrdev(major, DEVNAME, &pc8736x_gpio_fops);
if (r < 0) {
- printk(KERN_ERR NAME ": unable to register character device\n");
+ dev_err(&pdev->dev, "unable to register character device\n");
return r;
}
if (!major) {
major = r;
- printk(KERN_DEBUG NAME ": got dynamic major %d\n", major);
+ dev_dbg(&pdev->dev, "got dynamic major %d\n", major);
}
return 0;
@@ -284,11 +298,11 @@ static int __init pc8736x_gpio_init(void
static void __exit pc8736x_gpio_cleanup(void)
{
- printk(KERN_DEBUG NAME " cleanup\n");
+ dev_dbg(&pdev->dev, " cleanup\n");
release_region(pc8736x_gpio_base, 16);
- unregister_chrdev(major, NAME);
+ unregister_chrdev(major, DEVNAME);
}
module_init(pc8736x_gpio_init);
_
Patches currently in -mm which might be from jim.cromie@xxxxxxxxx are
chardev-gpio-for-scx200-pc-8736x-whitespace.patch
chardev-gpio-for-scx200-pc-8736x-modernize.patch
chardev-gpio-for-scx200-pc-8736x-add-platforn_device.patch
chardev-gpio-for-scx200-pc-8736x-device-minor.patch
chardev-gpio-for-scx200-pc-8736x-put-gpio_dump.patch
chardev-gpio-for-scx200-pc-8736x-add-v-command.patch
chardev-gpio-for-scx200-pc-8736x-refactor-scx200_probe.patch
chardev-gpio-for-scx200-pc-8736x-add-gpio-ops.patch
chardev-gpio-for-scx200-pc-8736x-dispatch.patch
chardev-gpio-for-scx200-pc-8736x-add-empty.patch
chardev-gpio-for-scx200-pc-8736x-migrate-file-ops.patch
chardev-gpio-for-scx200-pc-8736x-migrate-gpio_dump.patch
chardev-gpio-for-scx200-pc-8736x-add-new-pc8736x_gpio.patch
chardev-gpio-for-scx200-pc-8736x-add-platform_device.patch
chardev-gpio-for-scx200-pc-8736x-use-dev_dbg.patch
chardev-gpio-for-scx200-pc-8736x-fix-gpio_current.patch
chardev-gpio-for-scx200-pc-8736x-replace-spinlocks.patch
chardev-gpio-for-scx200-pc-8736x-display-pin.patch
chardev-gpio-for-scx200-pc-8736x-add-proper.patch
chardev-gpio-for-scx200-pc-8736x-add-sysfs-gpio.patch
generic-time-add-macro-to-simplify-hide-mask.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
