The patch titled
chardev: GPIO for SCx200 & PC-8736x: put gpio_dump on a diet
has been added to the -mm tree. Its filename is
chardev-gpio-for-scx200-pc-8736x-put-gpio_dump.patch
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: chardev: GPIO for SCx200 & PC-8736x: put gpio_dump on a diet
From: Jim Cromie <jim.cromie@xxxxxxxxx>
Shrink scx200_gpio_dump() to a single printk with ternary ops. The function
is still ifdef'd out, this is corrected in next patch, when it is actually
used.
The patch 'inadvertently' changed loglevel from DEBUG to INFO. This is Good,
because in next patch, its wired to a 'command' which the user can invoke when
they want. When they do so, its because they want INFO to support their
developement effort, and we want to give it to them without compiling a DEBUG
version of the driver.
Signed-off-by: Jim Cromie <jim.cromie@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
arch/i386/kernel/scx200.c | 39 ++++++++++--------------------------
1 file changed, 11 insertions(+), 28 deletions(-)
diff -puN arch/i386/kernel/scx200.c~chardev-gpio-for-scx200-pc-8736x-put-gpio_dump arch/i386/kernel/scx200.c
--- a/arch/i386/kernel/scx200.c~chardev-gpio-for-scx200-pc-8736x-put-gpio_dump
+++ a/arch/i386/kernel/scx200.c
@@ -108,34 +108,17 @@ u32 scx200_gpio_configure(unsigned index
#if 0
void scx200_gpio_dump(unsigned index)
{
- u32 config = scx200_gpio_configure(index, ~0, 0);
- printk(KERN_DEBUG "GPIO%02u: 0x%08lx", index, (unsigned long)config);
-
- if (config & 1)
- printk(" OE"); /* output enabled */
- else
- printk(" TS"); /* tristate */
- if (config & 2)
- printk(" PP"); /* push pull */
- else
- printk(" OD"); /* open drain */
- if (config & 4)
- printk(" PUE"); /* pull up enabled */
- else
- printk(" PUD"); /* pull up disabled */
- if (config & 8)
- printk(" LOCKED"); /* locked */
- if (config & 16)
- printk(" LEVEL"); /* level input */
- else
- printk(" EDGE"); /* edge input */
- if (config & 32)
- printk(" HI"); /* trigger on rising edge */
- else
- printk(" LO"); /* trigger on falling edge */
- if (config & 64)
- printk(" DEBOUNCE"); /* debounce */
- printk("\n");
+ u32 config = scx200_gpio_configure(index, ~0, 0);
+
+ printk(KERN_INFO NAME ": GPIO-%02u: 0x%08lx %s %s %s %s %s %s %s\n",
+ index, (unsigned long) config,
+ (config & 1) ? "OE" : "TS", /* output enabled / tristate */
+ (config & 2) ? "PP" : "OD", /* push pull / open drain */
+ (config & 4) ? "PUE" : "PUD", /* pull up enabled/disabled */
+ (config & 8) ? "LOCKED" : "", /* locked / unlocked */
+ (config & 16) ? "LEVEL" : "EDGE", /* level/edge input */
+ (config & 32) ? "HI" : "LO", /* trigger on rising/falling edge */
+ (config & 64) ? "DEBOUNCE" : ""); /* debounce */
}
#endif /* 0 */
_
Patches currently in -mm which might be from jim.cromie@xxxxxxxxx are
chardev-gpio-for-scx200-pc-8736x-whitespace.patch
chardev-gpio-for-scx200-pc-8736x-modernize.patch
chardev-gpio-for-scx200-pc-8736x-add-platforn_device.patch
chardev-gpio-for-scx200-pc-8736x-device-minor.patch
chardev-gpio-for-scx200-pc-8736x-put-gpio_dump.patch
chardev-gpio-for-scx200-pc-8736x-add-v-command.patch
chardev-gpio-for-scx200-pc-8736x-refactor-scx200_probe.patch
chardev-gpio-for-scx200-pc-8736x-add-gpio-ops.patch
chardev-gpio-for-scx200-pc-8736x-dispatch.patch
chardev-gpio-for-scx200-pc-8736x-add-empty.patch
chardev-gpio-for-scx200-pc-8736x-migrate-file-ops.patch
chardev-gpio-for-scx200-pc-8736x-migrate-gpio_dump.patch
chardev-gpio-for-scx200-pc-8736x-add-new-pc8736x_gpio.patch
chardev-gpio-for-scx200-pc-8736x-add-platform_device.patch
chardev-gpio-for-scx200-pc-8736x-use-dev_dbg.patch
chardev-gpio-for-scx200-pc-8736x-fix-gpio_current.patch
chardev-gpio-for-scx200-pc-8736x-replace-spinlocks.patch
chardev-gpio-for-scx200-pc-8736x-display-pin.patch
chardev-gpio-for-scx200-pc-8736x-add-proper.patch
chardev-gpio-for-scx200-pc-8736x-add-sysfs-gpio.patch
generic-time-add-macro-to-simplify-hide-mask.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
