Now that pinmux is available, let's use it for the UART DT nodes. Signed-off-by: Stefan Roese <sr@xxxxxxx> Cc: Paul Burton <paul.burton@xxxxxxxx> Cc: Harvey Hunt <harvey.hunt@xxxxxxxxxx> Cc: John Crispin <john@xxxxxxxxxxx> --- arch/mips/boot/dts/ralink/mt7628a.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/mips/boot/dts/ralink/mt7628a.dtsi b/arch/mips/boot/dts/ralink/mt7628a.dtsi index 8e096d533b09..2b33eeffe7a2 100644 --- a/arch/mips/boot/dts/ralink/mt7628a.dtsi +++ b/arch/mips/boot/dts/ralink/mt7628a.dtsi @@ -161,6 +161,9 @@ compatible = "ns16550a"; reg = <0xc00 0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_uart0_uart>; + resets = <&resetc 12>; reset-names = "uart0"; @@ -174,6 +177,9 @@ compatible = "ns16550a"; reg = <0xd00 0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_uart1_uart>; + resets = <&resetc 19>; reset-names = "uart1"; @@ -187,6 +193,9 @@ compatible = "ns16550a"; reg = <0xe00 0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_uart2_uart>; + resets = <&resetc 20>; reset-names = "uart2"; -- 2.21.0
