Re: [PATCH 2/2] MIPS: Fix CONFIG_CMDLINE handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Matthieu,

On Mon, Sep 10, 2018 at 02:09:21PM +0200, Mathieu Malaterre wrote:
> On Fri, Sep 7, 2018 at 8:55 PM Paul Burton <paul.burton@xxxxxxxx> wrote:
> > Commit 8ce355cf2e38 ("MIPS: Setup boot_command_line before
> > plat_mem_setup") fixed a problem for systems which have
> > CONFIG_CMDLINE_BOOL=y & use a DT with a chosen node that has either no
> > bootargs property or an empty one. In this configuration
> > early_init_dt_scan_chosen() copies CONFIG_CMDLINE into
> > boot_command_line, but the MIPS code doesn't know this so it appends
> > CONFIG_CMDLINE (via builtin_cmdline) to boot_command_line again. The
> > result is that boot_command_line contains the arguments from
> > CONFIG_CMDLINE twice.
> >
> > That commit took the approach of simply setting up boot_command_line
> > from the MIPS code before early_init_dt_scan_chosen() runs, causing it
> > not to copy CONFIG_CMDLINE to boot_command_line if a chosen node with no
> > bootargs property is found.
> >
> > Unfortunately this is problematic for systems which do have a non-empty
> > bootargs property & CONFIG_CMDLINE_BOOL=y. There
> > early_init_dt_scan_chosen() will overwrite boot_command_line with the
> > arguments from DT, which means we lose those from CONFIG_CMDLINE
> > entirely. This breaks CONFIG_MIPS_CMDLINE_DTB_EXTEND. If we have
> > CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER or
> > CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND selected and the DT has a bootargs
> > property which we should ignore, it will instead be honoured breaking
> > those configurations too.
> >
> > Fix this by reverting commit 8ce355cf2e38 ("MIPS: Setup
> > boot_command_line before plat_mem_setup") to restore the former
> > behaviour, and fixing the CONFIG_CMDLINE duplication issue by instead
> > providing a no-op implementation of early_init_dt_fixup_cmdline_arch()
> > to prevent early_init_dt_scan_chosen() from using CONFIG_CMDLINE.
> 
> Sorry I cannot test this patch ATM. I've simply CCed Paul C. just in case.

Thanks - for the record I did test on a Ci20, though I was booting using
my ci20-usb-boot tool which doesn't currently provide a command line to
the kernel. CONFIG_CMDLINE didn't get duplicated though.

I'll get back to a v2 for this & hopefully get it fixed up for 4.19, but
it might take a little while because my son was just born on Saturday :)

Thanks,
    Paul


[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux