Re: [PATCH v2 6/9] kbuild: consolidate Devicetree dtb build rules

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Sep 9, 2018 at 6:28 PM Masahiro Yamada
<yamada.masahiro@xxxxxxxxxxxxx> wrote:
>
> 2018-09-06 8:53 GMT+09:00 Rob Herring <robh@xxxxxxxxxx>:
> > There is nothing arch specific about building dtb files other than their
> > location under /arch/*/boot/dts/. Keeping each arch aligned is a pain.
> > The dependencies and supported targets are all slightly different.
> > Also, a cross-compiler for each arch is needed, but really the host
> > compiler preprocessor is perfectly fine for building dtbs. Move the
> > build rules to a common location and remove the arch specific ones. This
> > is done in a single step to avoid warnings about overriding rules.
> >
> > The build dependencies had been a mixture of 'scripts' and/or 'prepare'.
> > These pull in several dependencies some of which need a target compiler
> > (specifically devicetable-offsets.h) and aren't needed to build dtbs.
> > All that is really needed is dtc, so adjust the dependencies to only be
> > dtc.
> >
> > This change enables support 'dtbs_install' on some arches which were
> > missing the target.
> >
> > Cc: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
> > Cc: Michal Marek <michal.lkml@xxxxxxxxxxx>
> > Cc: Vineet Gupta <vgupta@xxxxxxxxxxxx>
> > Cc: Russell King <linux@xxxxxxxxxxxxxxx>
> > Cc: Catalin Marinas <catalin.marinas@xxxxxxx>
> > Cc: Will Deacon <will.deacon@xxxxxxx>
> > Cc: Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx>
> > Cc: Michal Simek <monstr@xxxxxxxxx>
> > Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
> > Cc: Paul Burton <paul.burton@xxxxxxxx>
> > Cc: James Hogan <jhogan@xxxxxxxxxx>
> > Cc: Ley Foon Tan <lftan@xxxxxxxxxx>
> > Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
> > Cc: Paul Mackerras <paulus@xxxxxxxxx>
> > Cc: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
> > Cc: Chris Zankel <chris@xxxxxxxxxx>
> > Cc: Max Filippov <jcmvbkbc@xxxxxxxxx>
> > Cc: linux-kbuild@xxxxxxxxxxxxxxx
> > Cc: linux-snps-arc@xxxxxxxxxxxxxxxxxxx
> > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > Cc: uclinux-h8-devel@xxxxxxxxxxxxxxxxxxxx
> > Cc: linux-mips@xxxxxxxxxxxxxx
> > Cc: nios2-dev@xxxxxxxxxxxxxxxxxxxxxx
> > Cc: linuxppc-dev@xxxxxxxxxxxxxxxx
> > Cc: linux-xtensa@xxxxxxxxxxxxxxxx
> > Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
> > ---
> > Please ack so I can take the whole series via the DT tree.
> >
> > v2:
> >  - Fix $arch/boot/dts path check for out of tree builds
> >  - Fix dtc dependency for building built-in dtbs
> >  - Fix microblaze built-in dtb building
> >
> >  Makefile                          | 32 +++++++++++++++++++++++++++++++
> >  arch/arc/Makefile                 |  6 ------
> >  arch/arm/Makefile                 | 20 +------------------
> >  arch/arm64/Makefile               | 17 +---------------
> >  arch/c6x/Makefile                 |  2 --
> >  arch/h8300/Makefile               | 11 +----------
> >  arch/microblaze/Makefile          |  4 +---
> >  arch/microblaze/boot/dts/Makefile |  2 ++
> >  arch/mips/Makefile                | 15 +--------------
> >  arch/nds32/Makefile               |  2 +-
> >  arch/nios2/Makefile               |  7 -------
> >  arch/nios2/boot/Makefile          |  4 ----
> >  arch/powerpc/Makefile             |  3 ---
> >  arch/xtensa/Makefile              | 12 +-----------
> >  scripts/Makefile.lib              |  2 +-
> >  15 files changed, 42 insertions(+), 97 deletions(-)
> >
> > diff --git a/Makefile b/Makefile
> > index 2b458801ba74..bc18dbbc16c5 100644
> > --- a/Makefile
> > +++ b/Makefile
> > @@ -1212,6 +1212,32 @@ kselftest-merge:
> >                 $(srctree)/tools/testing/selftests/*/config
> >         +$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
> >
> > +# ---------------------------------------------------------------------------
> > +# Devicetree files
> > +
> > +ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
> > +dtstree := arch/$(SRCARCH)/boot/dts
> > +endif
> > +
> > +ifdef CONFIG_OF_EARLY_FLATTREE
> > +
> > +%.dtb %.dtb.S %.dtb.o: | dtc
> > +       $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
>
>
> Hmm, I was worried about '%.dtb.o: | dtc'
> but seems working.
>
> Compiling %.S -> %.o requires objtool for x86,
> but x86 does not support DT.

Well, x86 does support DT to some extent. There's 2 platforms and the
DT unittests build and run on x86.

Actually, we can remove "%.dtb.S %.dtb.o" because we don't need those
as top-level build targets. Must have been a copy-n-paste relic from
before having common rules.

>
> If CONFIG_MODVERSIONS=y, scripts/genksyms/genksyms is required,
> %.dtb.S does not contain EXPORT_SYMBOL.

Okay, but that shouldn't affect any of this. We only build *.dtb.S
when doing built-in dtbs.

> BTW, 'dtc' should be a PHONY target.

Right, I found that too.

Rob


[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux