On 03-07-18, 14:32, Paul Cercueil wrote:
> The register area of the JZ4780 DMA core can be split into different
> sections for different purposes:
>
> * one set of registers is used to perform actions at the DMA core level,
> that will generally affect all channels;
>
> * one set of registers per DMA channel, to perform actions at the DMA
> channel level, that will only affect the channel in question.
>
> The problem rises when trying to support new versions of the JZ47xx
> Ingenic SoC. For instance, the JZ4770 has two DMA cores, each one
> with six DMA channels, and the register sets are interleaved:
> <DMA0 chan regs> <DMA1 chan regs> <DMA0 ctrl regs> <DMA1 ctrl regs>
>
> By using one memory resource for the channel-specific registers and
> one memory resource for the core-specific registers, we can support
> the JZ4770, by initializing the driver once per DMA core with different
> addresses.
>
> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/dma/jz4780-dma.txt | 6 +-
Pls move to separate patch.
> drivers/dma/dma-jz4780.c | 106 +++++++++++-------
> 2 files changed, 69 insertions(+), 43 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/jz4780-dma.txt b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
> index f25feee62b15..f9b1864f5b77 100644
> --- a/Documentation/devicetree/bindings/dma/jz4780-dma.txt
> +++ b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
> @@ -3,7 +3,8 @@
> Required properties:
>
> - compatible: Should be "ingenic,jz4780-dma"
> -- reg: Should contain the DMA controller registers location and length.
> +- reg: Should contain the DMA channel registers location and length, followed
> + by the DMA controller registers location and length.
> - interrupts: Should contain the interrupt specifier of the DMA controller.
> - interrupt-parent: Should be the phandle of the interrupt controller that
> - clocks: Should contain a clock specifier for the JZ4780 PDMA clock.
> @@ -22,7 +23,8 @@ Example:
>
> dma: dma@13420000 {
> compatible = "ingenic,jz4780-dma";
> - reg = <0x13420000 0x10000>;
> + reg = <0x13420000 0x400
> + 0x13421000 0x40>;
Second should be optional or we break platform which may not have
updated DT..
> - jzdma->base = devm_ioremap_resource(dev, res);
> - if (IS_ERR(jzdma->base))
> - return PTR_ERR(jzdma->base);
> + jzdma->chn_base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(jzdma->chn_base))
> + return PTR_ERR(jzdma->chn_base);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> + if (!res) {
> + dev_err(dev, "failed to get I/O memory\n");
> + return -EINVAL;
> + }
okay and this breaks if you happen to get probed on older DT. I think DT
is treated as ABI so you need to continue support older method while
finding if DT has split resources
--
~Vinod
