On Mon, Jun 25, 2018 at 07:15:36PM +0200, John Crispin wrote:
> With the driver being converted from platform_data to pure OF, we need to
> also add some docs.
>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: John Crispin <john@xxxxxxxxxxx>
> ---
> .../devicetree/bindings/pci/qcom,ar7240-pci.txt | 40 ++++++++++++++++++++++
> 1 file changed, 40 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt
>
> diff --git a/Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt b/Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt
> new file mode 100644
> index 000000000000..7f6ca8a0f859
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt
> @@ -0,0 +1,40 @@
> +* Qualcomm Atheros AR724X PCI express root complex
> +
> +Required properties:
> +- compatible: should contain "qcom,ar7240-pci" to identify the core.
> +- reg: Should contain the register ranges as listed in the reg-names property.
> +- reg-names: Definition: Must include the following entries
> + - "crp_base" Configuration registers
> + - "ctrl_base" Control registers
> + - "cfg_base" IO Memory
IO or config space? IO space goes in ranges and config space goes
in reg.
Same comments as 7100 below.
> +- #address-cells: set to <3>
> +- #size-cells: set to <2>
> +- ranges: ranges for the PCI memory and I/O regions
> +- interrupt-map-mask and interrupt-map: standard PCI
> + properties to define the mapping of the PCIe interface to interrupt
> + numbers.
> +- #interrupt-cells: set to <1>
> +- interrupt-parent: phandle to the MIPS IRQ controller
> +- interrupt-controller: define to enable the builtin IRQ cascade.
> +
> +* Example for qca9557
> + pcie0: pcie-controller@180c0000 {
> + compatible = "qcom,ar7240-pci";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + bus-range = <0x0 0x0>;
> + reg = <0x180c0000 0x1000>,
> + <0x180f0000 0x100>,
> + <0x14000000 0x1000>;
> + reg-names = "crp_base", "ctrl_base", "cfg_base";
> + ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000
> + 0x1000000 0 0x00000000 0x00000000 0 0x00000001>;
> + interrupt-parent = <&intc2>;
> + interrupts = <1>;
> +
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + interrupt-map-mask = <0 0 0 1>;
> + interrupt-map = <0 0 0 0 &pcie0 0>;
> + };
> --
> 2.11.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
