Only loongson-3 is DMA coherent and uses swiotlb. So move the dma
address translations stubs directly to the loongson-3 code, and remove
a few Kconfig indirections.
Signed-off-by: Christoph Hellwig <hch@xxxxxx>
---
arch/mips/Kconfig | 2 +-
arch/mips/loongson64/Kconfig | 5 -----
arch/mips/loongson64/common/Makefile | 5 -----
arch/mips/loongson64/loongson-3/Makefile | 2 +-
.../{common/dma-swiotlb.c => loongson-3/dma.c} | 16 ++++------------
5 files changed, 6 insertions(+), 24 deletions(-)
rename arch/mips/loongson64/{common/dma-swiotlb.c => loongson-3/dma.c} (68%)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 92cc7943d940..24cc20ea60b9 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -448,7 +448,6 @@ config MACH_LOONGSON32
config MACH_LOONGSON64
bool "Loongson-2/3 family of machines"
- select ARCH_HAS_PHYS_TO_DMA
select SYS_SUPPORTS_ZBOOT
help
This enables the support of Loongson-2/3 family of machines.
@@ -1383,6 +1382,7 @@ choice
config CPU_LOONGSON3
bool "Loongson 3 CPU"
depends on SYS_HAS_CPU_LOONGSON3
+ select ARCH_HAS_PHYS_TO_DMA
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index dbd2a9f9f9a9..a785bf8da3f3 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -93,7 +93,6 @@ config LOONGSON_MACH3X
select LOONGSON_MC146818
select ZONE_DMA32
select LEFI_FIRMWARE_INTERFACE
- select PHYS48_TO_HT40
help
Generic Loongson 3 family machines utilize the 3A/3B revision
of Loongson processor and RS780/SBX00 chipset.
@@ -132,10 +131,6 @@ config LOONGSON_UART_BASE
default y
depends on EARLY_PRINTK || SERIAL_8250
-config PHYS48_TO_HT40
- bool
- default y if CPU_LOONGSON3
-
config LOONGSON_MC146818
bool
default n
diff --git a/arch/mips/loongson64/common/Makefile b/arch/mips/loongson64/common/Makefile
index 8235ac7eac95..684624f61f5a 100644
--- a/arch/mips/loongson64/common/Makefile
+++ b/arch/mips/loongson64/common/Makefile
@@ -25,8 +25,3 @@ obj-$(CONFIG_CS5536) += cs5536/
#
obj-$(CONFIG_SUSPEND) += pm.o
-
-#
-# Big Memory (SWIOTLB) Support
-#
-obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o
diff --git a/arch/mips/loongson64/loongson-3/Makefile b/arch/mips/loongson64/loongson-3/Makefile
index 44bc1482158b..b5a0c2fa5446 100644
--- a/arch/mips/loongson64/loongson-3/Makefile
+++ b/arch/mips/loongson64/loongson-3/Makefile
@@ -1,7 +1,7 @@
#
# Makefile for Loongson-3 family machines
#
-obj-y += irq.o cop2-ex.o platform.o acpi_init.o
+obj-y += irq.o cop2-ex.o platform.o acpi_init.o dma.o
obj-$(CONFIG_SMP) += smp.o
diff --git a/arch/mips/loongson64/common/dma-swiotlb.c b/arch/mips/loongson64/loongson-3/dma.c
similarity index 68%
rename from arch/mips/loongson64/common/dma-swiotlb.c
rename to arch/mips/loongson64/loongson-3/dma.c
index a4f554bf1232..5e86635f71db 100644
--- a/arch/mips/loongson64/common/dma-swiotlb.c
+++ b/arch/mips/loongson64/loongson-3/dma.c
@@ -5,26 +5,18 @@
dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
{
- long nid;
-#ifdef CONFIG_PHYS48_TO_HT40
/* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from
* Loongson-3's 48bit address space and embed it into 40bit */
- nid = (paddr >> 44) & 0x3;
- paddr = ((nid << 44) ^ paddr) | (nid << 37);
-#endif
- return paddr;
+ long nid = (paddr >> 44) & 0x3;
+ return ((nid << 44) ^ paddr) | (nid << 37);
}
phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr)
{
- long nid;
-#ifdef CONFIG_PHYS48_TO_HT40
/* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from
* Loongson-3's 48bit address space and embed it into 40bit */
- nid = (daddr >> 37) & 0x3;
- daddr = ((nid << 37) ^ daddr) | (nid << 44);
-#endif
- return daddr;
+ long nid = (daddr >> 37) & 0x3;
+ return ((nid << 37) ^ daddr) | (nid << 44);
}
void __init plat_swiotlb_setup(void)
--
2.17.0
