From: Dan Haab <dan.haab@xxxxxxxxx>
Some Luxul devices use PCIe connected GPIO LEDs that are not available
until the PCI subsytem and its drivers load. Using the same array for
these LEDs would block registering any LEDs until all GPIOs become
available. This may be undesired behavior as some LEDs should be
available as early as possible (e.g. system status LED). This patch will
allow registering available LEDs while deffering these PCIe GPIO
connected 'extra' LEDs until they become available.
Signed-off-by: Dan Haab <dan.haab@xxxxxxxxx>
---
arch/mips/bcm47xx/leds.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/mips/bcm47xx/leds.c b/arch/mips/bcm47xx/leds.c
index 8307a8a..34a7b3f 100644
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -409,6 +409,12 @@
};
static const struct gpio_led
+bcm47xx_leds_luxul_xap1500_v1_extra[] __initconst = {
+ BCM47XX_GPIO_LED(44, "green", "5ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(76, "green", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
bcm47xx_leds_luxul_xbr_4400_v1[] __initconst = {
BCM47XX_GPIO_LED(12, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
BCM47XX_GPIO_LED_TRIGGER(15, "green", "status", 0, "timer"),
@@ -435,6 +441,11 @@
BCM47XX_GPIO_LED(15, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
};
+static const struct gpio_led
+bcm47xx_leds_luxul_xwr1750_v1_extra[] __initconst = {
+ BCM47XX_GPIO_LED(76, "green", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
/* Microsoft */
static const struct gpio_led
@@ -528,6 +539,12 @@
bcm47xx_leds_pdata.num_leds = ARRAY_SIZE(dev_leds); \
} while (0)
+static struct gpio_led_platform_data bcm47xx_leds_pdata_extra __initdata = {};
+#define bcm47xx_set_pdata_extra(dev_leds) do { \
+ bcm47xx_leds_pdata_extra.leds = dev_leds; \
+ bcm47xx_leds_pdata_extra.num_leds = ARRAY_SIZE(dev_leds); \
+} while (0)
+
void __init bcm47xx_leds_register(void)
{
enum bcm47xx_board board = bcm47xx_board_get();
@@ -705,6 +722,7 @@ void __init bcm47xx_leds_register(void)
break;
case BCM47XX_BOARD_LUXUL_XAP_1500_V1:
bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_1500_v1);
+ bcm47xx_set_pdata_extra(bcm47xx_leds_luxul_xap1500_v1_extra);
break;
case BCM47XX_BOARD_LUXUL_XBR_4400_V1:
bcm47xx_set_pdata(bcm47xx_leds_luxul_xbr_4400_v1);
@@ -717,6 +735,7 @@ void __init bcm47xx_leds_register(void)
break;
case BCM47XX_BOARD_LUXUL_XWR_1750_V1:
bcm47xx_set_pdata(bcm47xx_leds_luxul_xwr_1750_v1);
+ bcm47xx_set_pdata_extra(bcm47xx_leds_luxul_xwr1750_v1_extra);
break;
case BCM47XX_BOARD_MICROSOFT_MN700:
@@ -760,4 +779,6 @@ void __init bcm47xx_leds_register(void)
}
gpio_led_register_device(-1, &bcm47xx_leds_pdata);
+ if (bcm47xx_leds_pdata_extra.num_leds)
+ gpio_led_register_device(0, &bcm47xx_leds_pdata_extra);
}
--
1.9.1
